EN ISO 5801:2017/prA1
(Amendment)Fans - Performance testing using standardized airways - Amendment 1 (ISO 5801:2017/DAM 1:2024)
Fans - Performance testing using standardized airways - Amendment 1 (ISO 5801:2017/DAM 1:2024)
Ventilatoren - Leistungsmessung auf genormten Prüfständen - Änderung 1 (ISO 5801:2017/DAM 1:2024)
Ventilateurs - Essais aérauliques sur circuits normalisés - Amendement 1 (ISO 5801:2017/DAM 1:2024)
Ventilatorji - Preskušanje lastnosti na standardiziranih merilnih progah - Dopolnilo A1 (ISO 5801:2017/DAM 1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5801:2018/oprA1:2024
01-junij-2024
Ventilatorji - Preskušanje lastnosti na standardiziranih merilnih progah - Dopolnilo
A1 (ISO 5801:2017/DAM 1:2024)
Fans - Performance testing using standardized airways - Amendment 1 (ISO
5801:2017/DAM 1:2024)
Ventilatoren - Leistungsmessung auf genormten Prüfständen - Änderung 1 (ISO
5801:2017/DAM 1:2024)
Ventilateurs - Essais aérauliques sur circuits normalisés - Amendement 1 (ISO
5801:2017/DAM 1:2024)
Ta slovenski standard je istoveten z: EN ISO 5801:2017/prA1
ICS:
23.120 Zračniki. Vetrniki. Klimatske Ventilators. Fans. Air-
naprave conditioners
SIST EN ISO 5801:2018/oprA1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5801:2018/oprA1:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 5801:2018/oprA1:2024
DRAFT
Amendment
ISO 5801:2017/
DAM 1
ISO/TC 117
Fans — Performance testing using
Secretariat: BSI
standardized airways
Voting begins on:
AMENDMENT 1
2024-04-01
Ventilateurs — Essais aérauliques sur circuits normalisés Voting terminates on:
2024-06-24
AMENDEMENT 1
ICS: 23.120
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 5801:2017/DAM 1:2024(en)
© ISO 2024
---------------------- Page: 3 ----------------------
SIST EN ISO 5801:2018/oprA1:2024
DRAFT
ISO 5801:2017/DAM 1:2024(en)
Amendment
ISO 5801:2017/
DAM 1
ISO/TC 117
Fans — Performance testing using
Secretariat: BSI
standardized airways
Voting begins on:
AMENDMENT 1
Ventilateurs — Essais aérauliques sur circuits normalisés Voting terminates on:
AMENDEMENT 1
ICS: 23.120
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO 5801:2017/DAM 1:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 4 ----------------------
SIST EN ISO 5801:2018/oprA1:2024
ISO 5801:2017/DAM 1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.