iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12641-2:2019

(Main)

Intermodal loading units and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders

Intermodal loading units and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders

This document specifies minimum requirements for the strength and attachment of tarpaulins used as curtainsiders on intermodal loading units and commercial vehicles.
NOTE   The described tarpaulins according to this document only work for load securing with a body according to EN12642, Code XL or EN 283.

Intermodale Ladeeinheiten und Nutzfahrzeuge - Planen - Teil 2: Mindestanforderungen an Schiebeplanen

Dieses Dokument legt Mindestanforderungen an die Festigkeit und Anbindungen von Planen als Schiebeplanen an intermodalen Ladeeinheiten und Nutzfahrzeugen fest.
ANMERKUNG   Die beschriebenen Planen nach diesem Dokument dienen als Hilfsmittel zur Ladungssicherung nur in Verbindung mit einem Fahrzeugaufbau nach EN 12642, Code XL oder EN 283.

Unités de transport intermodal et véhicules utilitaires - Bâches - Partie 2 : Exigences minimales pour rideaux coulissants latéraux

Le présent document spécifie les exigences minimales de résistance et de fixation des bâches utilisées comme rideaux coulissants latéraux sur les unités de transport intermodal et les véhicules utilitaires.
NOTE   Les bâches décrites conformément au présent document sont uniquement destinées à l’arrimage de charges sur une carrosserie conformément à l’EN 12642, Code XL, ou à l’EN 283.

Intermodalne nakladalne enote in gospodarska vozila - Ponjave - 2. del: Minimalne zahteve za stranske zavese

Ta dokument določa minimalne zahteve za trdnost in pritrditev ponjav, ki se uporabljajo kot stranske zavese na intermodalnih nakladalnih enotah in gospodarskih vozilih.
OPOMBA: Opisane ponjave v skladu s tem standardom se uporabljajo samo za zavarovanje tovora s kesonom v skladu s kodeksom XL standarda EN 12642 ali s standardom EN 283.

General Information

Status
Published
Publication Date
10-Dec-2019
Withdrawal Date
29-Jun-2020
ICS
55.180.10 - General purpose containers
Technical Committee
CEN/TC 119 - Swap bodies for combined goods transport
Drafting Committee
CEN/TC 119/WG 7 - Cargo Securing
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Dec-2019
Due Date
01-Oct-2019
Completion Date
11-Dec-2019
Directive
2014/47/EU - Directive 2014/47/EU of the European Parliament and of the Council of 3 April 2014 on the technical roadside inspection of the roadworthiness of commercial vehicles circulating in the Union and repealing Directive 2000/30/EC Text with EEA relevance
Ref Project
SIST EN 12641-2:2020 - Intermodal loading units and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders

Relations

Replaces
EN 12641-2:2006 - Swap bodies and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders
Effective Date
08-Jun-2022

Buy Standard

EN 12641-2:2020EN 12641-2:2020
PreviousNext
Standard
EN 12641-2:2020
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12641-2:2020
01-februar-2020
Nadomešča:
SIST EN 12641-2:2007
Intermodalne nakladalne enote in gospodarska vozila - Ponjave - 2. del: Minimalne
zahteve za stranske zavese
Intermodal loading units and commercial vehicles - Tarpaulins - Part 2: Minimum
requirements for curtainsiders
Intermodale Ladeeinheiten und Nutzfahrzeuge - Planen - Teil 2: Midestanforderungen an
Schiebeplanen
Unités de transport intermodal et véhicules utilitaires - Bâches - Partie 2 : Exigences
minimales pour rideaux coulissants latéraux
Ta slovenski standard je istoveten z: EN 12641-2:2019
ICS:
55.180.10 Večnamenski kontejnerji General purpose containers
SIST EN 12641-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12641-2:2020

---------------------- Page: 2 ----------------------
SIST EN 12641-2:2020


EN 12641-2
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2019
EUROPÄISCHE NORM
ICS 55.180.10 Supersedes EN 12641-2:2006
English Version

Intermodal loading units and commercial vehicles -
Tarpaulins - Part 2: Minimum requirements for
curtainsiders
Caisses mobiles - Bâches - Partie 2 : Prescritptions Intermodale Ladeeinheiten und Nutzfahrzeuge -
minimales pour rideaux coulissants Planen - Teil 2: Mindestanforderungen an
Schiebeplanen
This European Standard was approved by CEN on 9 September 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12641-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12641-2:2020
EN 12641-2:2019 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
5 Marking . 10
Bibliography . 12

2

---------------------- Page: 4 ----------------------
SIST EN 12641-2:2020
EN 12641-2:2019 (E)
European foreword
This document (EN 12641-2:2019) has been prepared by Technical Committee CEN/TC 119
“Intermodal Loading Units and Cargo Securing (ILUCS)”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be
withdrawn at the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12641-2:2006.
The ma
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 6346:2022(Main)
Freight containers - Coding, identification and marking (ISO 6346:2022, Corrected version 2022-08)
SIST EN ISO 6346:2022

This document provides a system for the identification and presentation of information about freight containers. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on the containers themselves.
The methods of displaying identification and certain other data (including operational data) on containers by means of permanent marks are included.
This document specifies:
a) a container identification system, with an associated system for verifying the accuracy of its use, having:
—    mandatory marks for the presentation of the identification system for visual interpretation, and
—    features to be used in optional Automatic Equipment Identification (AEI) and electronic data interchange (EDI);
b) a coding system for data on container size and type, with corresponding marks for their display;
c) operational marks, both mandatory and optional;
d) physical presentation of marks on the container.
The terms “mandatory” and “optional” in this document are used to differentiate those ISO marking provisions which shall necessarily be fulfilled by all containers from those which are not required of all containers. The optional marks are included to further comprehension and promote uniform application of the optional mark. If a choice has been made to display an optional mark, the provisions laid down in this document relating to the mark shall be applied. The terms “mandatory” and “optional” do not refer to requirements of any regulatory body.
This document applies to all freight containers covered by International Standards ISO 668, parts 1 to 5 of ISO 1496, ISO 8323 and should, wherever appropriate and practicable, be applied:
—    to containers other than those covered by the International Standards mentioned in Clause 2;
—    to container-related and/or detachable equipment.
NOTE 1    Containers marked according to previous editions of ISO 6346 need not be re-marked.
This document does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or nongovernmental organizations.
NOTE 2    Some of the major international conventions whose container-marking requirements are not covered in this document are as follows:
—     International Convention for Safe Containers (1972, as amended) (CSC), International Maritime Organization (IMO);
—     Customs Convention on Containers 1956 and 1972, related to temporary admission and transport under customs seal.
—     Convention on Temporary Admission (Istanbul, 26 June 1990), related to temporary admission.
It should not be assumed that this list is exhaustive.
This document does not cover the display of technical data on tank containers (see ISO 1496-3), nor does it, in any way, include identification marks or safety signs for items of cargo which may be carried in freight containers.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12641-1:2019(Main)
Intermodal loading units and commercial vehicles - Tarpaulins - Part 1: Minimum requirements
SIST EN 12641-1:2020

This document specifies minimum requirements for the strength and attachment of tarpaulins used on swap bodies and utility vehicles for road and road/rail combined (intermodal transport) traffic.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13044-1:2011/AC:2014(Corrigendum)
Intermodal Loading Units - Marking - Part 1: Markings for identification
SIST EN 13044-1:2011/AC:2014

CEN/TC 119 - Editorial modifications to 5.2.3 and A.2 in the English and French versions of EN 13044-1:2011. No xml version as the mother standard EN 13004-1:2012 is not available as an xml file.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13044-3:2011(Main)
Intermodal Loading Units - Marking - Part 3: Markings of semi-trailers related to rail operation
SIST EN 13044-3:2011

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communication (including automatic data processing systems), as well as for display on the ILU and other non ISO containers (i.e. which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and specific other data (including operational data) on the ILU by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This part of the European Standard prescribes the system of operational data for the codification of the semi-trailer. The codification assigns a maximum profile for the cover area available at the rail tracks to the semi-trailer in order to enable the selection of those rail tracks on which these semi-trailers can be transported without any danger.
This part of the European Standard prescribes furthermore the additional operational markings, which are necessary for railway operation.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13044-2:2011(Main)
Intermodal Loading Units - Marking - Part 2: Markings of swap bodies related to rail operation
SIST EN 13044-2:2011

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communication (including automatic data processing systems), as well as for display on the ILU and other non ISO containers (i.e. which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and specific other data (including operational data) on the ILU by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation; and
b)   a coding system for data on ILU size, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This part of the European Standard prescribes the system of operational data for the codification of the swap bodies. The codification assigns a maximum profile for the cover area available at the rail tracks to the swap bodies in order to enable the selection of those rail tracks on which these swap bodies can be transported without any danger.
This part of the European Standard prescribes furthermore the additional operational markings, which are necessary for railway operation.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13044-1:2011(Main)
Intermodal Loading Units - Marking - Part 1: Markings for identification
SIST EN 13044-1:2011

This European Standard provides a system for the identification and presentation of information about the ILU. The identification system is intended for general application, for example in documentation, control and communications (including automatic data processing systems), as well as for display on an ILU and other non ISO containers (i.e. which dimensions and testing parameters differ from those defined by the applicable ISO standards) used in European transport.
The methods of displaying identification and certain other data (including operational data) on ILUs by means of permanent marks are included.
This European Standard specifies:
a)   an ILU identification system with an associated system for verifying the accuracy of its use, having mandatory marks for the presentation of the identification system for visual interpretation, and
b)   a coding system for data on ILU size and type, with corresponding marks for their display;
c)   mandatory operational marks;
d)   physical presentation of the marks on the ILU.
This part of EN 13044 specifies a system to identify the owner of the ILU, which includes an associated system for verifying the accuracy of its use.
This European Standard does not cover temporary operational marks of any kind, permanent marks, data plates, etc. which may be required by intergovernmental agreements, national legislation or non-governmental organisations other than CEN.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 284:2006(Main)
Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements
SIST EN 284:2007

This European Standard specifies basic requirements for non-stackable swap bodies of class C, having a gross mass of not more than 16 t.
NOTE 1   "Swap bodies of class C" means that they are equipped with bottom fittings positioned according to the specification for 1 C (20') ISO containers (see ISO 668).
NOTE 2   Stackable swap bodies class C are specified in CEN/TS 13853.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 14993:2005(Main)
Swap bodies for combined transport - Stackable swap bodies type A 1371 - Dimensions, design requirements and testing
SIST-TS CEN/TS 14993:2005

This document specifies dimensions, design requirements and testing requirements of stackable swap bodies type A 1371 which are suitable for domestic and European multimodal conveyance by road, rail, short sea and coastal sea transport (including Ro/Ro or ferry transport) and inland waterways.

  • Technical specification
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 13853:2003(Main)
Swap bodies for combined transport - Stackable swap bodies type C 745-S16 - Dimensions, design requirements and testing
SIST-TS CEN/TS 13853:2004

This Technical Specification specifies dimensions, design requirements and testing requirements of stackable swap bodies of type C 745-S16 which are suitable for domestic and international multimodal conveyance by road, rail, short sea and coastal sea transport (including Ro/Ro or ferry transport) and inland waterways.

  • Technical specification
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12410:1999(Main)
Swap bodies - Thermal swap bodies of Class A - Dimensions and general requirements
SIST EN 12410:2000

This European standard specifies the dimensions and basic requirements for thermal swap bodies of class A. These swap bodies are suitable for international exchange and for conveyance by road and rail including interchange between these forms of transport.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day