EN ISO 10328:2016

Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2016)

IMPORTANT - ISO 10328:2016 is suitable for the assessment of the conformity of lower limb prosthetic devices/structures with the strength requirements specified in 4.4 of ISO 22523:2006 (see NOTE 1). Prosthetic ankle-foot devices and foot units on the market, which have demonstrated their compliance with the strength requirements specified in 4.4 of ISO 22523:2006 through submission to the relevant tests of ISO 10328:2006, need not be retested to ISO 22675:2016.
WARNING - ISO 10328:2016 is not suitable to serve as a guide for the selection of a specific lower limb prosthetic device/structure in the prescription of an individual lower limb prosthesis! Any disregard of this warning can result in a safety risk for amputees.
ISO 10328:2016 specifies procedures for static and cyclic strength tests on lower-limb prostheses (see NOTE 2) which typically produce compound loadings by the application of a single test force. The compound loads in the test sample relate to the peak values of the components of loading which normally occur at different instants during the stance phase of walking.

Prothetik - Prüfung der Struktur von Prothesen der unteren Gliedmaßen - Anforderungen und Prüfverfahren (ISO 10328:2016)

Prothèses - Essais portant sur la structure des prothèses de membres inférieurs - Exigences et méthodes d'essai (ISO 10328:2016)

IMPORTANT - ISO 10328:2016 permet d'évaluer la conformité des prothèses/structures prothétiques de membre inférieur selon les exigences concernant la résistance spécifiées en 4.4 de l'ISO 22523:2006 (voir la NOTE 1). Les unités de pied et les ensembles cheville-pied prothétiques commercialisés, conformes aux exigences concernant la résistance spécifiées en 4.4 de l'ISO 22523:2006 après soumission aux essais appropriés de l'ISO 10328:2006, sont réputés conformes à l'ISO 22675:2016.
AVERTISSEMENT - ISO 10328:2016 ne peut pas servir de guide pour choisir une prothèse/structure prothétique lors de la prescription d'une prothèse de membre inférieur ! Ignorer cet avertissement peut entraîner des risques pour la sécurité des personnes amputées.
ISO 10328:2016 spécifie des modes opératoires d'essais de résistance statiques et cycliques des prothèses de membres inférieurs (voir la NOTE 2) qui produisent typiquement des contraintes combinées par l'application d'une force d'essai unique. Les contraintes combinées dans l'échantillon d'essai correspondent aux valeurs maximales des composantes des forces qui interviennent normalement à différents moments au cours de la phase d'appui du cycle de marche.

Protetika - Preskušanje strukture protez spodnjih okončin - Zahteve in preskusne metode (ISO 10328:2016)

POMEMBNO: ta mednarodni standard je primeren za oceno skladnosti protetičnih pripomočkov/struktur za spodnje okončine z zahtevami glede trdnosti, določenimi v točki 4.4 standarda ISO 22523:2006 (glej OPOMBA 1). Protetičnih pripomočkov za gleženj in stopalo ter enot za stopalo, ki so na voljo na tržišču in dokazano izpolnjujejo zahteve, podane v točki 4.4 standarda ISO 22523:2006, na podlagi opravljenih ustreznih preskusov v skladu s standardom ISO 10328:2006, ni treba znova preskusiti v skladu s standardom ISO 22675:2016.
OPOZORILO: ta mednarodni standard ni primeren za uporabo kot vodilo za izbiro določenega protetičnega pripomočka/strukture za spodnje okončine pri predpisovanju posamezne proteze za spodnje okončine. Morebitno neupoštevanje tega opozorila lahko pomeni varnostno tveganje za amputirance. Ta mednarodni standard določa postopke za preskušanje statične in ciklične trdnosti protez za spodnje okončine (glej OPOMBA 2), pri katerih se običajno ustvarijo sestavljene obremenitve na podlagi uporabe enkratne preskusne sile. Sestavljene obremenitve v preskusnem vzorcu se navezujejo na najvišje vrednosti sestavnih delov obremenitve, ki se običajno pojavijo v različnih obdobjih faze drže pri hoji.
Preskusi, opisani v tem mednarodnem standardu:
– glavni statični in ciklični preskus za vse sestavne dele;
– ločen statični preskus pri torziji za vse sestavne dele;
– ločen statični in ciklični preskus za pripomočke za gleženj in stopalo ter enote za stopalo za vse pripomočke za gleženj in stopalo kot samostojne sestavne dele, vključno z enotami za stopalo ali pripomočki za gleženj, ter za vse enote za stopalo kot samostojne sestavne dele;
– ločen statični preskus skrajne trdnosti v največjem upogibu kolena za kolenske sklepe in povezane dele za vse enote za koleno ali sestave za koleno in golen ter soležne sestavne dele, ki običajno zagotavljajo blokado upogiba pri celotni protezi;
– ločen statični in ciklični preskus za kolenske blokade za vse mehanizme, ki blokirajo kolenski spoj v iztegnjenem položaju kolenske enote ali sestava za koleno in golen.
Preskusi, opisani v tem mednarodnem standardu se uporabljajo za posebne vrste protez za disartikulacijo gležnja (glej OPOMBA 2), transtibialne (podkolenske) proteze, proteze za disartikulacijo kolena in transfemoralne (nadkolenske) proteze ter proteze za disartikulacijo distalnega (spodnjega) dela kolka in proteze, ki se uporabljajo po hemipelvektomiji (glej OPOMBA 3).
OPOMBA 1: preskuse je mogoče opraviti za celotne strukture, dele struktur ali posamezne sestavne dele.
OPOMBA 2: preskusi se uporabljajo samo za proteze za disartikulacijo gležnja, ki vključujejo sestavne dele (za stopalo) protetičnih pripomočkov za gleženj in stopalo, vzete iz običajne proizvodne linije.
OPOMBA 3: distalni del zajema enoto za koleno, pripomoček za gleženj in stopalo ter vse vmesne dele. Preskusi za kolčne enote so opisani v standardu ISO 15032.

General Information

• Status: Published
• Publication Date: 21-Jun-2016
• Withdrawal Date: 30-Dec-2016
• ICS: 11.040.40 - Implants for surgery, prosthetics and orthotics
• ICS: 11.180.10 - Aids and adaptation for moving
• Technical Committee: CEN/TC 293 - Technical aids for disabled persons
• Drafting Committee: CEN/TC 293 - Technical aids for disabled persons
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Jun-2016
• Completion Date: 22-Jun-2016
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN ISO 10328:2016 - Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2016)

Relations

• Replaces: EN ISO 10328:2006 - Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2006)
• Effective Date: 29-Jun-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10328:2016
01-september-2016
1DGRPHãþD
SIST EN ISO 10328:2006
3URWHWLND3UHVNXãDQMHVWUXNWXUHSURWH]VSRGQMLKRNRQþLQ=DKWHYHLQSUHVNXVQH
PHWRGH,62
Prosthetics - Structural testing of lower-limb prostheses - Requirements and test
methods (ISO 10328:2016)
Prothetik - Prüfung der Struktur von Prothesen der unteren Gliedmaßen - Anforderungen
und Prüfverfahren (ISO 10328:2016)
Prothèses - Essais portant sur la structure des prothèses de membres inférieurs -
Exigences et méthodes d'essai (ISO 10328:2016)
Ta slovenski standard je istoveten z: EN ISO 10328:2016
ICS:
11.040.40 Implantanti za kirurgijo, Implants for surgery,
protetiko in ortetiko prosthetics and orthotics
SIST EN ISO 10328:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10328:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 10328:2016


EN ISO 10328
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2016
EUROPÄISCHE NORM
ICS 11.040.40 Supersedes EN ISO 10328:2006
English Version

Prosthetics - Structural testing of lower-limb prostheses -
Requirements and test methods (ISO 10328:2016)
Prothèses - Essais portant sur la structure des Prothetik - Prüfung der Struktur von Prothesen der
prothèses de membres inférieurs - Exigences et unteren Gliedmaßen - Anforderungen und
méthodes d'essai (ISO 10328:2016) Prüfverfahren (ISO 10328:2016)
This European Standard was approved by CEN on 12 May 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10328:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10328:2016
EN ISO 10328:2016 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10328:2016
EN ISO 10328:2016 (E)
European foreword
This document (EN ISO 10328:2016) has been prepared by Technical Committee ISO/TC 168 "
Prosthetics and orthoticsa" in collaboration with Technical Committee CEN/TC 293 “Assistive products
for persons with disability” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2016, and conflicting national standards
shall be withdrawn at the latest by December 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 10328:2006.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, For
...