EN ISO 8028:2018

Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017)

ISO 8028:2017 specifies the requirements for four types of hose and hose assemblies for use in airless paint spraying. The four types are differentiated by burst pressure and operating temperature, and can be constructed from rubber or plastic materials, or a combination of rubber and plastic material.

Gummi- und/oder Kunststoffschläuche und -schlauchleitungen für das luftfreie Farbspritzen - Spezifikation (ISO 8028:2017)

Dieses Dokument legt die Anforderungen an vier Typen von Schläuchen und Schlauchleitungen für die Verwendung beim luftfreien Farbspritzen fest. Die vier Typen werden unterschieden durch Berstdruck und Betriebstemperatur, und können aus Gummi oder Kunststoffmaterialien oder einer Kombination aus Gummi und Kunststoff hergestellt sein.

Tuyaux et flexibles en caoutchouc et/ou en plastique pour pulvérisation (AIRLESS) des peintures - Spécifications (ISO 8028:2017)

ISO 8028:2017 spécifie les exigences relatives à quatre types de tuyaux et flexibles utilisés dans la pulvérisation des peintures sans air. Les quatre types sont différenciés par la pression de rupture et la température d'utilisation, et peuvent être réalisés à partir de matériaux en caoutchouc ou en plastique, ou une combinaison de matériaux en caoutchouc et en plastique.

Gumene in/ali polimerne cevi ter cevni priključki za brezzračno brizganje barve - Specifikacija (ISO 8028:2017)

Ta dokument določa zahteve za štiri vrste cevi in cevnih priključkov za brezzračno brizganje barve. Te štiri vrste se ločujejo glede na razpočni tlak in delovno temperaturo, mogoče pa jih je izdelati iz gumenih ali plastičnih materialov ali s kombiniranjem gumenih in plastičnih materialov.

General Information

• Status: Published
• Publication Date: 30-Jan-2018
• Withdrawal Date: 30-Jul-2018
• ICS: 23.040.70 - Hoses and hose assemblies
• ICS: 83.140.40 - Hoses
• ICS: 87.100 - Paint coating equipment
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 31-Jan-2018
• Completion Date: 31-Jan-2018
• Ref Project: SIST EN ISO 8028:2018 - Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017)

Relations

• Replaces: EN ISO 8028:2000 - Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999)
• Effective Date: 10-Dec-2014
• Revised: prEN ISO 8028 - Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO/DIS 8028:2023)
• Effective Date: 22-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8028:2018
01-april-2018
1DGRPHãþD
SIST EN ISO 8028:2001
*XPHQHLQDOLSROLPHUQHFHYLWHUFHYQLSULNOMXþNL]DEUH]]UDþQREUL]JDQMHEDUYH
6SHFLILNDFLMD,62
Rubber and/or plastics hoses and hose assemblies for airless paint spraying -
Specification (ISO 8028:2017)
Gummi- und/oder Kunststoffschläuche und -schlauchleitungen für das luftfreie
Farbspritzen - Spezifikation (ISO 8028:2017)
Tuyaux et flexibles en caoutchouc et/ou en plastique pour pulvérisation sans air des
peintures - Spécifications (ISO 8028:2017)
Ta slovenski standard je istoveten z: EN ISO 8028:2018
ICS:
83.140.40 Gumene cevi Hoses
87.100 Oprema za nanašanje Paint coating equipment
premazov
SIST EN ISO 8028:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8028:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 8028:2018


EN ISO 8028
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2018
EUROPÄISCHE NORM
ICS 23.040.70; 87.100 Supersedes EN ISO 8028:2000
English Version

Rubber and/or plastics hoses and hose assemblies for
airless paint spraying - Specification (ISO 8028:2017)
Tuyaux et flexibles en caoutchouc et/ou en plastique Gummi- und/oder Kunststoffschläuche und -
pour pulvérisation (AIRLESS) des peintures - schlauchleitungen für das luftfreie Farbspritzen -
Spécifications (ISO 8028:2017) Spezifikation (ISO 8028:2017)
This European Standard was approved by CEN on 26 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8028:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8028:2018
EN ISO 8028:2018 (E)
Contents Page
European foreword . 3


2

---------------------- Page: 4 ----------------------

SIST EN ISO 8028:2018
EN ISO 8028:2018 (E)
European foreword
This document (EN ISO 8028:2018) has been prepared by Technical Committee ISO/TC 45/SC 1
“Rubber and plastics hoses and hose assemblies” in collaboration with Technical Committee
CEN/TC 218 “Rubber and plastics hoses and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2018, and conflicting national standards shall be
withdrawn at the latest by July 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8028:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8028:2017 has been approved by CEN as EN ISO 8028:2018 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 8028:2018

---------------------- Page: 6 --------
...