Workplace exposure - Measurement of dustiness of bulk materials that contain or release respirable NOAA and other respirable particles - Part 1: Requirements and choice of test methods

This document provides the methodology for measuring and characterizing the dustiness of a bulk material that contains or releases respirable NOAA and other respirable particles. In addition, it specifies the environmental conditions, the sample handling procedure and the method of calculating and presenting the results. Guidance is given on the choice of method to be used.
The methodology described in this document enables:
a)   the quantification of dustiness in terms of health related dustiness mass fractions,
b)   the quantification of dustiness in terms of a number-based dustiness index  and a number-based emission rate, and
c)   the characterization of the aerosol from its particle size distribution and the morphology and chemical composition of its particles.
NOTE 1   Currently, no number-based classification scheme in terms of particle number has been established for particle dustiness release. Eventually, when a large enough number of measurement data has been obtained, the intention is to revise this document and to introduce a number-based classification scheme.
This document is applicable to all bulk materials, including powders, granules or pellets, containing or releasing respirable NOAA ad other respirable particles.
NOTE 2   The vortex shaker method specified in part 5 of this standard series has not yet been evaluated for pellets and granules.
NOTE 3   The rotating drum and continuous drop methods have not yet been evaluated for nanofibres and nanoplates.
This document does not provide methods for assessing the release of particles during handling or mechanical reduction by machining (e.g. crushing, cutting, sanding, sawing) of  nanocomposites.

Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern, die alveolengängige NOAA oder andere alveolengängige Partikel enthalten oder freisetzen - Teil 1: Anforderungen und Auswahl der Prüfverfahren

Diese Europäische Norm bietet eine Methodik für die Messung und Charakterisierung des Staubungs-verhaltens von Schüttgut, das Nanoobjekte oder Partikel im Submikrometerbereich enthält oder freisetzt. Darüber hinaus legt die Norm die Umgebungsbedingungen, das Verfahren zur Handhabung der Proben und das Verfahren zur Berechnung und Darstellung der Ergebnisse fest. Des Weiteren enthält sie eine Anleitung für die Auswahl des anzuwendenden Verfahrens.
Die in dieser Europäischen Norm festgelegte Methodik ermöglicht
a)   die Quantifizierung des Staubungsverhaltens im Hinblick auf gesundheitsrelevante Indexmassenanteile,
b)   die Quantifizierung des Staubungsverhaltens im Hinblick auf eine Indexzahl und eine Emissionsrate und
c)   die Charakterisierung des Aerosols auf der Grundlage seiner Partikelgrößenverteilung und der Morphologie und chemischen Zusammensetzung seiner Partikel.
ANMERKUNG 1   Bisher wurde noch kein zahlenbasiertes Klassifizierungsschema im Hinblick auf die Partikelzahl für die Freisetzung von Partikelstaub entwickelt. Schließlich, wenn eine ausreichend große Anzahl an Messdaten vorliegt, ist beabsichtigt, diese Europäische Norm zu revidieren und ein zahlenbasiertes Klassifizierungsschema einzuführen.
Diese Europäische Norm gilt für alle Schüttgüter einschließlich Pulver, Granulaten oder Pellets, die Nanoobjekte oder Partikel im Submikrometerbereich enthalten oder freisetzen.
ANMERKUNG 2   Das in Teil 5 dieser Europäischen Norm festgelegte Vortex-Schüttlerverfahren wurde noch nicht für Pellets und Granulate beurteilt.
ANMERKUNG 3   Die Verfahren mit rotierender Trommel und kontinuierlichem Fall wurden noch nicht für Nanofasern und Nanoplättchen beurteilt.
Diese Europäische Norm liefert keine Verfahren für die Beurteilung der Freisetzung von Partikeln während der Handhabung oder mechanischen Reduzierung fester Nanomaterialien (z. B. Nanoverbundstoffe) durch maschinelle Bearbeitung (z. B. zerkleinern, schneiden, schleifen, sägen).

Exposition sur les lieux de travail - Mesurage du pouvoir de resuspension des matériaux en vrac contenant ou émettant des nano-objets et leurs agrégats et agglomérats (NOAA) ou autres particules en fraction alvéolaire - Partie 1: Exigences et choix des méthodes d'essai

Le présent document décrit la méthodologie pour le mesurage et la caractérisation du pouvoir de resuspension d’un matériau en vrac contenant ou émettant des NOAA et autres particules en fraction alvéolaire. Il spécifie également les conditions ambiantes, le mode opératoire de conditionnement des échantillons ainsi que la méthode de calcul et d’expression des résultats. Des recommandations sont données concernant le choix de la méthode à utiliser.
La méthodologie décrite dans le présent document permet :
a)   la quantification du pouvoir de resuspension en termes de fractions massiques de poussières liées à la santé ;
b)   la quantification du pouvoir de resuspension en termes d’indice du pouvoir de resuspension en nombre et de taux d’émission en nombre ;
c)   la caractérisation de l’aérosol à partir de sa distribution granulométrique, ainsi que de sa morphologie et de la composition chimique de ses particules.
NOTE 1   Aucun schéma de classification du pouvoir de resuspension en termes d’indice en nombre et de taux d’émission en nombre n’a encore été établi. Dès lors que des données de mesure seront disponibles en assez grand nombre, il est prévu de réviser le présent document et d’introduire un schéma de classification basé sur le nombre.
Le présent document est applicable à tous les matériaux en vrac, y compris des granules, des poudres ou des pastilles contenant ou émettant des NOAA et autres particules en fraction alvéolaire.
NOTE 2   La méthode de l’agitateur vortex spécifiée dans la Partie 5 de la présente série de normes n’a pas encore été évaluée pour les pastilles et les granules.
NOTE 3   La méthode du tambour rotatif et la méthode de la chute continue n’ont pas été évaluées pour les nanofibres et les nanofeuillets.
Le présent document ne spécifie pas de méthode pour l’évaluation de la libération de particules lors de la manipulation ou de la réduction mécanique par transformation (par exemple broyage, coupe, sablage, sciage) de nanocomposites.

Izpostavljenost na delovnem mestu - Meritve prašnosti razsutih materialov, ki vsebujejo ali sproščajo respirabilne nanopredmete ter njihove agregate in aglomerate (NOAA) in druge respirabilne delce - 1. del: Zahteve in izbira preskusnih metod

Ta evropski standard določa metodologijo za merjenje in opredelitev prašnosti razsutega materiala, ki vsebuje ali sprošča nanopredmete ali submikrometrske delce. Poleg tega navaja okoljske pogoje, postopek za ravnanje z vzorci ter metodo izračuna in predstavitve rezultatov. Smernice so podane v zvezi z izbiro uporabljene metode.
Metodologija, ki je opisana v tem evropskem standardu, omogoča:
a)   kvantifikacijo prašnosti v smislu z zdravjem povezanih indeksnih masnih delcev,
b)   kvantifikacijo prašnosti v smislu indeksnega števila in stopnje emisij ter
c)   karakterizacijo aerosola na podlagi porazdelitve velikosti delcev ter morfologije in kemijske sestave njegovih delcev.
OPOMBA 1:   Za sproščanje prašnosti delcev v smislu števila delcev trenutno še ni vzpostavljena nobena klasifikacijska shema na podlagi števil. Ko bo sčasoma pridobljenih dovolj merilnih podatkov, je predvidena revizija tega evropskega standarda in uvedba klasifikacijske sheme na podlagi števil.
Ta evropski standard se uporablja za vse razsute materiale, vključno s praški, granulami in peleti, ki vsebujejo ali sproščajo nanopredmete ali submikrometrske delce.
OPOMBA 2:   Metoda s krožnim mešalnikom, ki je navedena v 5. delu tega evropskega standarda, še ni ocenjena za pelete in granule.
OPOMBA 3:   Metodi z vrtečim bobnom in trajnim padanjem še nista ocenjeni za nanovlakna in nanoplošče.
Ta evropski standard ne določa metod za ocenjevanje sproščanja delcev med ravnanjem s trdnimi nanomateriali (npr. nanokompoziti) ali njihovim mehanskim zmanjševanjem med strojno obdelavo (npr. drobljenje, rezanje, brušenje, žaganje).

General Information

Status
Published
Publication Date
26-Mar-2019
Withdrawal Date
29-Sep-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Mar-2019
Due Date
23-Dec-2018
Completion Date
27-Mar-2019

Buy Standard

Standard
EN 17199-1:2019
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17199-1:2018
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17199-1:2019
01-september-2019
Izpostavljenost na delovnem mestu - Meritve prašnosti razsutih materialov, ki
vsebujejo ali sproščajo respirabilne nanopredmete ter njihove agregate in
aglomerate (NOAA) in druge respirabilne delce - 1. del: Zahteve in izbira
preskusnih metod
Workplace exposure - Measurement of dustiness of bulk materials that contain or
release respirable NOAA and other respirable particles - Part 1: Requirements and
choice of test methods
Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern, die
Nanoobjekte oder Submikrometerpartikel enthalten oder freisetzen - Teil 1:
Anforderungen und Auswahl des Prüfverfahrens
Exposition sur les lieux de travail - Mesurage du pouvoir de resuspension des matériaux
en vrac contenant ou émettant des nano-objets et leurs agrégats et agglomérats (NOAA)
ou autres particules en fraction alvéolaire - Partie 1: Exigences et choix des méthodes
d'essai
Ta slovenski standard je istoveten z: EN 17199-1:2019
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
SIST EN 17199-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 17199-1:2019

---------------------- Page: 2 ----------------------

SIST EN 17199-1:2019


EN 17199-1
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 13.040.30
English Version

Workplace exposure - Measurement of dustiness of bulk
materials that contain or release respirable NOAA and
other respirable particles - Part 1: Requirements and
choice of test methods
Exposition sur les lieux de travail - Mesurage du Exposition am Arbeitsplatz - Messung des
pouvoir de resuspension des matériaux en vrac Staubungsverhaltens von Schüttgütern, die
contenant ou émettant des nano-objets et leurs Nanoobjekte oder Submikrometerpartikel enthalten
agrégats et agglomérats (NOAA) ou autres particules oder freisetzen - Teil 1: Anforderungen und Auswahl
en fraction alvéolaire - Partie 1: Exigences et choix des des Prüfverfahrens
méthodes d'essai
This European Standard was approved by CEN on 8 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17199-1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 17199-1:2019
EN 17199-1:2019 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Symbols and abbreviations . 9
5 Principle . 10
5.1 General .
...

SLOVENSKI STANDARD
oSIST prEN 17199-1:2018
01-februar-2018
[Not translated]
Workplace exposure - Measurement of dustiness of bulk materials that contain or
release nano-objects or submicrometer particles - Part 1: Requirements and choice of
test methods
Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Nanoobjekte und
deren Aggregate und Agglomerate enthaltenden Schüttgütern - Teil 1: Anforderungen
und Auswahl des Prüfverfahrens
Exposition sur les lieux de travail - Mesurage du pouvoir de resuspension des matériaux
en vrac contenant des nano-objets et leurs agrégats et agglomérats - Partie 1:
Exigences et choix des méthodes d'essai
Ta slovenski standard je istoveten z: prEN 17199-1
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
oSIST prEN 17199-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17199-1:2018

---------------------- Page: 2 ----------------------
oSIST prEN 17199-1:2018


DRAFT
EUROPEAN STANDARD
prEN 17199-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2018
ICS 13.040.30
English Version

Workplace exposure - Measurement of dustiness of bulk
materials that contain or release nano-objects or
submicrometer particles - Part 1: Requirements and choice
of test methods
Exposition sur les lieux de travail - Mesurage du Exposition am Arbeitsplatz - Messung des
pouvoir de resuspension des matériaux en vrac Staubungsverhaltens von Nanoobjekte und deren
contenant des nano-objets et leurs agrégats et Aggregate und Agglomerate enthaltenden Schüttgütern
agglomérats - Partie 1: Exigences et choix des - Teil 1: Anforderungen und Auswahl des
méthodes d'essai Prüfverfahrens
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 137.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17199-1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17199-1:2018
prEN 17199-1:2017 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Symbols and abbreviations . 10
5 Principle . 11
5.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.