CEN/TS 13810-2:2003

Wood-based panels - Floating floors - Part 2: Test methods

This European Standard specifies test methods for loading a floating floor with static concentrated point loads, alternating loads and dynamic impact loads for determining the values of the resulting deflections. NOTE: These test methods form part of the basis for classification of floating floor constructions. The requirements, i.e. load values, number of load cycles, and deformation limits for the different load categories, are given in prEN (WI 00 112 134).

Holzwerkstoffe - Schwimmend verlegte Fußböden - Teil 2: Prüfverfahren

Diese Europäische Norm legt Prüfverfahren zur Bestimmung der resultierenden Durchbiegungs-werte eines nicht-tragenden schwimmend verlegten Fußbodens, der vollflächig unterstützt wird, bei statischer Punktbelastung, Wechselbelastung und dynamischer Stoß-belastung fest.
ANMERKUNG   Diese Prüfverfahren sind Teil der Grundlage zur Klassifizierung von schwimmend verlegten Fußboden-konstruktionen. Die Anforderungen, d. h. Lastwerte, Anzahl der Lastspiele sowie Durchbiegungs-Grenz-werte für die verschiedenen Lastkategorien sind in prEN 13810-1 angegeben.

Panneaux à base de bois - Planchers flottants - Partie 2 : Méthodes d'essai

La présente norme européenne prescrit des méthodes d'essai pour déterminer les valeurs des flèches résultant de l'application de charges statiques ponctuelles, de charges alternées et de chocs sur un plancher flottant. NOTE: Ces méthodes d'essai font partie des bases pour la classification des constructions de plancher flottant. Les exigences, p.e. valeurs des charges, nombre de cycles de chargement et limites de déformation pour les différentes catégories de charge sont données dans prEN (WI 00 112 134).

Lesne plošče - Plavajoči podi - 2. del: Preskusne metode

General Information

• Status: Published
• Publication Date: 01-Apr-2003
• ICS: 79.060.01 - Wood-based panels in general
• Technical Committee: CEN/TC 112 - Woodbased panels
• Drafting Committee: CEN/TC 112/WG 4 - Test methods
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 27-Sep-2006
• Completion Date: 27-Sep-2006
• Ref Project: SIST-TS CEN/TS 13810-2:2004 - Wood-based panels - Floating floors - Part 2: Test methods

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 13810-2:2004
01-januar-2004
/HVQHSORãþH3ODYDMRþLSRGLGHO3UHVNXVQHPHWRGH
Wood-based panels - Floating floors - Part 2: Test methods
Holzwerkstoffe - Schwimmend verlegte Fußböden - Teil 2: Prüfverfahren
Panneaux a base de bois - Planchers flottants - Partie 2 : Méthodes d'essai
Ta slovenski standard je istoveten z: CEN/TS 13810-2:2003
ICS:
79.060.01 /HVQHSORãþHQDVSORãQR Wood-based panels in
general
SIST-TS CEN/TS 13810-2:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 13810-2:2004

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 13810-2:2004
TECHNICAL SPECIFICATION
CEN/TS 13810-2
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
April 2003
ICS 79.060.01
English version
Wood-based panels – Floating floors – Part 2: Test methods
Panneaux à base de bois — Planchers flottants — Holzwerkstoffe — Schwimmend verlegte Fußböden —
Partie 2 : Méthodes d'essai Teil 2: Prüfverfahren
This Technical Specification (CEN/TS 13810-2) was approved by CEN on 11 November 2002 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available. It
is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible
conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 13810-2:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 13810-2:2004
CEN/TS 13810-2:2003 (E)
Contents page
Foreword. 3
1 Scope. 4
2 Normative references . 4
3 Terms and definitions. 4
4 Symbols and subscripts. 5
4.1 Symbols . 5
4.2 Subscripts. 5
5 Principle . 5
6 Sampling . 5
7 Test set-up and apparatus . 5
7.1 Test set-up for concentrated point load and alternating load. 5
7.2 Test set-up for impact load . 7
7.3 Apparatus. 7
7.3.1 Concentrated point load. 7
7.3.2 Alternating load. 7
7.3.3 Impact load .
...