EN 4510:2018

Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters, straight, double end, with locking ring

This standard specifies the characteristics of the pipe coupling adapter, 60° spherical sealing face manufactured in titanium alloy with locking ring, for installing in a boss for aerospace applications.
These adapters shall be installed into port connections manufactured in accordance with EN 2602 using ISO 3601-1 sealing O-rings selected sizes. O-ring material depends on the system fluid and operation conditions. The installation shall be performed in accordance with EN 2608.
Nominal working pressure: up to 28000 kPa.
Temperature range: limited by elastomeric sealing ring, −54 °C to +135 °C

Luft- und Raumfahrt - Rohrverschraubungen mit Kugelbuchsen, 60°, aus Titanlegierung TI-P64001, gerade Anschlussverschraubungen mit Sicherungsring

Série aérospatiale - Raccords sphériques, 60°, en alliage de titane TI-P64001, raccords droits, à planter, avec bague de sécurité

Aeronavtika - Cevne spojke , 60°, okrogle, iz titanove litine TI-P64001, prilagodilne (adapterji), ravne, dvostranske, z zapornimi obroči

Ta evropski standard določa lastnosti adapterjev za cevne spojke, 60°, okrogle, iz titanove litine, z zapornimi obroči za uporabo v aeronavtiki.
Adapterji so nameščeni v vhode za adapterje, ki so izdelani v skladu s standardom EN 2602 z uporabo tesnilk O izbranih velikosti v skladu s standardom ISO 3601-1. Material tesnilk O je odvisen od tekočine v sistemu in pogojev delovanja. Namestitev je treba izvesti v skladu s standardom EN 2608.
Nazivni delovni tlak: do 28.000 kPa.
Temperaturno območje: omejeno z elastomernim tesnilnim obročem, −54 °C do 135 °C.

General Information

• Status: Published
• Publication Date: 24-Jul-2018
• Withdrawal Date: 30-Jan-2019
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 3 - Hydraulics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 25-Jul-2018
• Completion Date: 25-Jul-2018
• Ref Project: SIST EN 4510:2018 - Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters, straight, double end, with locking ring

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4510:2018
01-oktober-2018
$HURQDYWLND&HYQHVSRMNHƒRNURJOHL]WLWDQRYHOLWLQH7,3SULODJRGLOQH
DGDSWHUMLUDYQHGYRVWUDQVNH]]DSRUQLPLREURþL
Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters,
straight, double end, with locking ring
Luft- und Raumfahrt - Rohrverschraubungen mit Kugelbuchsen, 60°, aus Titanlegierung
TI-P64001, gerade Anschlußverschraubungen mit Sicherungsring
Série aérospatiale - Raccords sphèriques, 60°, en alliage de titane TI-P64001, raccords
droits, à planter, avec bague de freinage
Ta slovenski standard je istoveten z: EN 4510:2018
ICS:
49.025.30 Titan Titanium
49.080 /HWDOVNLLQYHVROMVNL Aerospace fluid systems and
KLGUDYOLþQLVLVWHPLLQGHOL components
SIST EN 4510:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4510:2018

---------------------- Page: 2 ----------------------

SIST EN 4510:2018


EN 4510
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2018
EUROPÄISCHE NORM
ICS 49.080
English Version

Aerospace series - Pipe couplings, 60°, spherical, in
titanium alloy TI-P64001, adapters, straight, double end,
with locking ring
Série aérospatiale - Raccords sphériques, 60°, en Luft- und Raumfahrt - Rohrverschraubungen mit
alliage de titane TI-P64001, raccords droits, à planter, Kugelbuchsen, 60°, aus Titanlegierung TI-P64001,
avec bague de sécurité gerade Anschlussverschraubungen mit Sicherungsring
This European Standard was approved by CEN on 13 May 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4510:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4510:2018
EN 4510:2018 (E)
Contents
Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Requirements characteristics . 6
4 Quality assurance – Responsibility for inspection . 9
5 Designation. 10
6 Identification marking . 10
7 Preparation for delivery . 10
8 Technical specification . 10
Bibliography . 11

2

------------
...