Temperature control devices and temperature limiters for heat generating systems

1.1   This European Standard applies to electrical or non electrical temperature control devices which are used to control temperatures within heat generating systems by controlling the supply of energy. It also applies to limiting devices which ensure that the temperature in heat generating systems will not exceed a predefined limit.
This European Standard specifies operating values, operating times, and operational sequences associated with the safety of the heat generating system.
This European Standard also applies to controls using NTCs or PTCs thermistors, additional requirements for which are contained in Annex J of EN 60730-2-9:2010.
This European Standard applies to controls with a rated voltage not exceeding 690 V and with a rated current not exceeding 63 A.
This European Standard also applies to manual controls if, electrically and/or mechanically, they form an integral part of automatic controls.
NOTE   Requirements for manually operated switches not forming part of an automatic control are contained in EN 61058 1.
This European Standard does not apply to room thermostats.
1.2   This European Standard does not take into account the response value of an automatic action of the control, if such a response value is dependent upon the method of mounting the control in the heat generating system or equipment, in which case the control should be tested together with the heat generator. Where a response value is of significance for the protection of the user or surroundings, the value defined in the appropriate household equipment standard or as determined by the manufacturer applies.
1.3   This European Standard applies also to controls incorporating electronic devices, requirements for which are contained in Annex DX.

Temperaturregeleinrichtungen und Temperaturbegrenzer für wärmeerzeugende Anlagen

1.1   Diese Europäische Norm gilt für elektrische oder nichtelektrische Temperatur¬regeleinrichtungen, die zur Regelung der Temperatur in wärmeerzeugenden Anlagen durch Regelung der Energiezufuhr verwendet werden. Sie gilt ebenfalls für Begrenzungseinrichtungen, die sicherstellen, dass die Tempera¬tur in den wärme-erzeugenden Anlagen eine zuvor festgelegte Grenze nicht überschreitet.
Diese Europäische Norm legt Betriebswerte, Betriebsdauer und Betriebsabläufe fest, die von der Sicherheit der wärmeerzeugenden Anlage vorgegeben werden.
Diese Europäische Norm gilt auch für Regel  und Steuergeräte, in denen NTC  oder PTC Thermistoren verwendet werden, für die zusätzlichen Anforderungen nach EN 60730 2 9:2010 Anhang J, enthalten sind.
Diese Europäische Norm gilt für Regel  und Steuergeräte mit einer Bemessungsspannung bis zu 690 V und einem Bemessungsstrom bis zu 63 A.
Diese Europäische Norm gilt auch für manuell betätigte Regel  und Steuergeräte, falls diese elektrisch und/oder mecha¬nisch einen integralen Bestandteil von automatischen Regel  und Steuergeräten darstellen.
ANMERKUNG   Anforderungen an manuell betätigte Schalter, die nicht zu einem automatischen Regel  und Steuergerät gehören, sind in EN 61058 1 enthalten.
Diese Europäische Norm gilt nicht für Raumtemperaturregler.
1.2   In dieser Europäischen Norm wird der Ansprechwert einer automatischen Wirkungsweise des RS nicht berücksichtigt, wenn ein derartiger Ansprechwert von der Art des Anbringens des RS in der wärmeer-zeugenden Anlage oder dem Betriebsmittel abhängt; in diesem Fall sollte das RS zusammen mit dem Wärmeerzeuger geprüft werden. Ist ein Ansprechwert von besonderer Bedeutung für den Schutz des Benutzers oder der Umgebung, gilt der in der entsprechenden Haushaltgerätenorm definierte oder der vom Hersteller bestimmte Wert.
1.3   Diese Europäische Norm gilt auch für RS, die elektronische Einrichtungen enthalten und für die die Anforderungen in Anhang DX enthalten sind.

Dispositifs de régulation et de limitation de température pour les systèmes générateurs de chaleur

1.1   La présente Norme européenne s’applique aux dispositifs de régulation de la température d’appareils électriques ou non électriques, utilisés pour contrôler la température dans des systèmes générateurs de chaleur en agissant sur l’alimentation en énergie. Elle s’applique également aux limiteurs qui permettent de maintenir la température dans les systèmes générateurs de chaleur à une valeur ne dépassant pas une limite prédéfinie.
La présente Norme européenne spécifie des valeurs de réglage, des durées de fonctionnement et des séquences de fonctionnement associées à la sécurité du système générateur de chaleur.
La présente Norme européenne s’applique également aux dispositifs de commande utilisant des thermistances à coefficient de température négatif (CTN) ou à coefficient de température positif (CTP), pour lesquelles des exigences supplémentaires sont mentionnées en Annexe J de la CEI 60730-2-9.
La présente Norme européenne s’applique également aux dispositifs de commande dont la tension nominale ne dépasse pas 690 V et dont le courant nominal ne dépasse pas 63 A.
La présente Norme européenne s’applique également aux dispositifs de commande manuelle dans la mesure où ils font partie intégrante, électriquement et/ou mécaniquement, des dispositifs de commande automatique.
NOTE   Les exigences relatives aux interrupteurs à commande manuelle ne faisant pas partie d’un dispositif de commande automatique sont mentionnées dans l’EN 61058-1.
La présente Norme européenne ne s’applique pas aux thermostats d’ambiance.
1.2   La présente Norme européenne ne prend pas en considération la valeur de réponse d’une action automatique du dispositif de commande lorsqu’elle est influencée par la méthode de montage du dispositif de commande dans le système ou l’équipement générateur de chaleur, auquel cas il convient de soumettre à l’essai le dispositif de commande avec le générateur de chaleur. Dans le cas où une telle valeur de réponse est importante du point de vue de la protection de l’utilisateur ou de l’environnement, la valeur spécifiée dans la norme relative à l’équipement domestique approprié ou prescrite par le fabricant s’applique.
1.3   La présente Norme européenne s’applique également aux dispositifs de commande incorporant des dispositifs électroniques, pour lesquels des exigences sont mentionnées en Annexe DX.

Naprave za regulacijo in omejevanje temperature za sisteme generiranja toplote

Ta evropski standard se uporablja za naprave za električno ali neelektrično regulacijo temperature, ki se uporabljajo za regulacijo temperature v sistemih generiranja toplote in se z njimi regulira dovajanje energije; uporablja se tudi za naprave za omejevanje, ki zagotavljajo, da temperatura v ogrevalnih sistemih ne preseže predhodno določene omejitve. Ta evropski standard določa delovne vrednosti, čas delovanja in operativna zaporedja, povezana z varnostjo sistema generiranja toplote. Ta evropski standard se uporablja tudi za naprave za regulacijo, ki uporabljajo termistorje NTC ali PTC, za katere so dodatne zahteve opredeljene v Prilogi J k standardu IEC 60730-2-9. Ta evropski standard se uporablja za naprave za regulacijo, katerih nazivna napetost ne presega 690 V, nazivni tok pa ne 63 A. Ta evropski standard se uporablja tudi za ročne naprave za regulacijo, če so v električnem in/ali mehanskem smislu sestavni del samodejnih naprav za regulacijo.

General Information

Status
Published
Publication Date
26-Jun-2012
Withdrawal Date
30-Dec-2012
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
03-Mar-2024
Completion Date
03-Mar-2024

Relations

Buy Standard

Standard
EN 14597:2012
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Naprave za regulacijo in omejevanje temperature za sisteme generiranja toploteTemperaturregeleinrichtungen und Temperaturbegrenzer für wärmeerzeugende AnlagenDispositifs de régulation et de limitation de température pour les systèmes générateurs de chaleurTemperature control devices and temperature limiters for heat generating systems97.120Avtomatske krmilne naprave za domAutomatic controls for household use91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 14597:2012SIST EN 14597:2012en,fr,de01-november-2012SIST EN 14597:2012SLOVENSKI
STANDARDSIST EN 14597:20061DGRPHãþD



SIST EN 14597:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14597
June 2012 ICS 17.200.20; 97.120 Supersedes EN 14597:2005English Version
Temperature control devices and temperature limiters for heat generating systems
Dispositifs de régulation et de limitation de température pour les systèmes générateurs de chaleur
Temperaturregeleinrichtungen und Temperaturbegrenzer für wärmeerzeugende Anlagen This European Standard was approved by CEN on 10 May 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14597:2012: ESIST EN 14597:2012



EN 14597:2012 (E) 2 Contents Page Foreword .4Introduction .51 Scope .82 Normative references .83 Terms and definitions .94 General requirements and general notes on tests . 125 Rating . 126 Classification . 127 Information . 138 Protection against electric shock . 139 Provision for protective earthing . 1310 Terminals and terminations . 1311 Constructional requirements . 1312 Moisture and dust resistance . 1513 Electric strength and insulation resistance . 1514 Heating . 1515 Manufacturing de
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.