EN ISO 11296-4:2018/A1:2021

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)

2021-02-11 - TC decision is missing to skip FV.

Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 4: Vor Ort härtendes Schlauch-Lining - Änderung 1: Aktualisierung von Begriffen, Anforderungen an Kennzeichnungen und Verfahren für die alternative Angabe von Ergebnissen des Biegeversuchs (ISO 11296-4:2018/Amd 1:2021)

No scope available

Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 4: Tubage continu par tubes polymérisés sur place - Amendement 1: Actualisation des définitions, des exigences de marquage, et de la procédure pour une autre expression des propriétés de flexion (ISO 11296-4:2018/Amd 1:2021)

Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za odvodnjavanje in kanalizacijo za obratovanje brez tlaka (vodi s prosto gladino) - 4. del: Oblaganje s cevmi, utrjenimi na mestu vgradnje - Dopolnilo A1: Posodobljene definicije, zahteve za označevanje in alternativno navajanje rezultatov upogibnega preskusa (ISO 11296-4:2018/Amd 1:2021)

General Information

• Status: Published
• Publication Date: 25-May-2021
• Withdrawal Date: 29-Nov-2021
• ICS: 23.040.20 - Plastics pipes
• ICS: 23.040.45 - Plastics fittings
• ICS: 91.140.80 - Drainage systems
• ICS: 93.030 - External sewage systems
• Technical Committee: CEN/TC 155 - Plastics piping systems and ducting systems
• Drafting Committee: CEN/TC 155/WG 17 - Plastic components for the use of renovation of piping systems
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-May-2021
• Completion Date: 26-May-2021
• Ref Project: SIST EN ISO 11296-4:2018/A1:2021 - Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)

Relations

• Amends: EN ISO 11296-4:2018 - Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018)
• Effective Date: 11-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11296-4:2018/A1:2021
01-julij-2021
Cevni sistemi iz polimernih materialov za obnovo podzemnih omrežij za
odvodnjavanje in kanalizacijo za obratovanje brez tlaka (vodi s prosto gladino) - 4.
del: Oblaganje s cevmi, utrjenimi na mestu vgradnje - Dopolnilo A1: Posodobljene
definicije, zahteve za označevanje in alternativno navajanje rezultatov upogibnega
preskusa (ISO 11296-4:2018/Amd 1:2021)
Plastics piping systems for renovation of underground non-pressure drainage and
sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated
definitions, marking requirements and procedure for alternative expression of flexural
test results (ISO 11296-4:2018/Amd 1:2021)
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen
Entwässerungsnetzen (Freispiegelleitungen) - Teil 4: Vor Ort härtendes Schlauch-Lining
- Änderung 1: Aktualisierung von Begriffen, Anforderungen an Kennzeichnungen und
Verfahren für die alternative Angabe von Ergebnissen des Biegeversuchs (ISO 11296-
4:2018/Amd 1:2021)
Ta slovenski standard je istoveten z: EN ISO 11296-4:2018/A1:2021
ICS:
23.040.05 Cevovodi za zunanje Pipeline and its parts for
sisteme za odpadno vodo in external sewage systems
njihovi deli
91.140.80 Drenažni sistemi Drainage systems
93.030 Zunanji sistemi za odpadno External sewage systems
vodo
SIST EN ISO 11296-4:2018/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11296-4:2018/A1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 11296-4:2018/A1:2021


EN ISO 11296-4:2018/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2021
EUROPÄISCHE NORM
ICS 23.040.20; 23.040.45; 91.140.80; 93.030
English Version

Plastics piping systems for renovation of underground
non-pressure drainage and sewerage networks - Part 4:
Lining with cured-in-place pipes - Amendment 1: Updated
definitions, marking requirements and procedure for
alternative expression of flexural test results (ISO 11296-
4:2018/Amd 1:2021)
Systèmes de canalisations en plastique pour la Kunststoff-Rohrleitungssysteme für die Renovierung
rénovation des réseaux de branchements et de von erdverlegten drucklosen Entwässerungsnetzen
collecteurs d'assainissement enterrés sans pression - (Freispiegelleitungen) - Teil 4: Vor Ort härtendes
Partie 4: Tubage continu par tubes polymérisés sur Schlauch-Lining - Änderung 1: Aktualisierung von
place - Amendement 1: Actualisation des définitions, Begriffen, Anforderungen an Kennzeichnungen und
des exigences de marquage, et de la procédure pour Verfahren für die alternative Angabe von Ergebnissen
une autre expression des propriétés de flexion (ISO des Biegeversuchs (ISO 11296-4:2018/Amd 1:2021)
11296-4:2018/Amd 1:2021)
This amendment A1 modifies the European Standard EN ISO 11296-4:2018; it was approved by CEN on 24 December 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11296-4:2018/A1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
EN ISO 11296-4:2018/A1:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11296-4:2018/A1:2021
EN ISO 11296-4:2018/A1:2021 (E)
European foreword
This document (EN ISO 11296-4:2018/A1:2021) has been prepared by Technical Committee ISO/TC
138 "Pl
...