Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation of measuring procedures (ISO 21832:2018)

This document specifies performance requirements and test methods for the evaluation of procedures for measuring metals and metalloids in airborne particles sampled onto a suitable collection substrate.
This document specifies a method for estimating the uncertainties associated with random and systematic errors and combining them to calculate the expanded uncertainty of the measuring procedure as a whole, as prescribed in ISO 20581.
This document is applicable to measuring procedures in which sampling and analysis is carried out in separate stages, but it does not specify performance requirements for collection, transport and storage of samples, since these are addressed in EN 13205-1 and ISO 15767.
This document does not apply to procedures for measuring metals or metalloids present as inorganic gases or vapours (e.g. mercury, arsenic) or to procedures for measuring metals and metalloids in compounds that could be present as a particle/vapour mixture (e.g. arsenic trioxide).

Luft am Arbeitsplatz - Metalle und Metalloide in luftgetragenen Partikeln - Anforderungen an die Evaluierung von Messverfahren (ISO 21832:2018)

Dieses Dokument legt Anforderungen an die Leistungsfähigkeit sowie Prüfverfahren zur Evaluierung von Messverfahren zur quantitativen Bestimmung von Metallen und Metalloiden in luftgetragenen Partikeln fest, die auf einem geeigneten Substrat, z. B. einem Filter, gesammelt wurden.
Dieses Dokument legt, wie nach ISO 20581 vorgeschrieben, ein Verfahren fest, mit dem Unsicherheiten, die mit zufälligen und systematischen Fehlern zusammenhängen, abgeschätzt werden können. Außerdem wird deren Kombination zum Berechnen der erweiterten Unsicherheit des Messverfahrens als Ganzes vorgeschrieben.
Dieses Dokument ist anzuwenden für Messverfahren, bei denen Probenahme und Analyse in getrennten Schritten durchgeführt werden. Es werden jedoch keine Leistungsanforderungen für die Sammlung, den Transport und die Lagerung von Proben festgelegt, da diese Aspekte in EN 13205 1 und ISO 15767 behandelt werden.
Dieses Dokument ist nicht anzuwenden für Verfahren zur quantitativen Bestimmung von Metallen und Metalloiden, die in anorganischen Gasen oder Dämpfen vorhanden sind, wie z. B. von Quecksilber, Arsen, oder für Verfahren zur quantitativen Bestimmung von Metallen und Metalloiden in Verbindungen, die als Partikel-Dampf-Gemisch vorliegen könnten (z. B. Arsentrioxid).

Air des lieux de travail - Métaux et métalloïdes dans les particules en suspension dans l'air - Exigences relatives à l'évaluation des procédures de mesure (ISO 21832:2018)

Le présent document précise les exigences de performance et les méthodes d'essai pour l'évaluation des procédures de mesure des métaux et métalloïdes présents dans les particules en suspension dans l'air échantillonnées sur un substrat de collecte approprié.
Le présent document spécifie une méthode permettant d'estimer les incertitudes associées aux erreurs aléatoires et systématiques et de les combiner pour calculer l'incertitude élargie de la procédure de mesure dans son ensemble, comme spécifié dans l'ISO 20581.
Le présent document s'applique aux procédures de mesure qui dissocient l'étape de prélèvement de l'étape d'analyse, mais il ne précise aucune exigence de performance concernant la collecte, le transport et le stockage des échantillons, dans la mesure où ces exigences sont traitées dans l'EN 13205‑1 et l'ISO 15767.
Le présent document ne s'applique pas aux procédures de mesure des métaux ou métalloïdes présents dans des gaz ou des vapeurs inorganiques (par exemple le mercure, l'arsenic), ni aux procédures de mesure des métaux et métalloïdes présents dans des composés pouvant exister sous forme de mélange de particules/vapeurs (par exemple le trioxyde d'arsenic).

Zrak na delovnem mestu - Kovine in polkovine v lebdečih delcih - Zahteve za vrednotenje merilnih postopkov (ISO 21832:2018)

General Information

Status
Published
Publication Date
07-Apr-2020
Withdrawal Date
30-Oct-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Apr-2020
Due Date
12-Sep-2021
Completion Date
08-Apr-2020

Relations

Buy Standard

Standard
EN ISO 21832:2020
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 21832:2020
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21832:2020
01-junij-2020
Nadomešča:
SIST EN 13890:2009
Zrak na delovnem mestu - Kovine in polkovine v lebdečih delcih - Zahteve za
vrednotenje merilnih postopkov (ISO 21832:2018)
Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation
of measuring procedures (ISO 21832:2018)
Luft am Arbeitsplatz - Metalle und Metalloide in luftgetragenen Partikeln - Anforderungen
an die Evaluation von Messverfahren (ISO 21832:2018)
Air des lieux de travail - Métaux et métalloïdes dans les particules en suspension dans
l'air - Exigences relatives à l'évaluation des procédures de mesure (ISO 21832:2018)
Ta slovenski standard je istoveten z: EN ISO 21832:2020
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
SIST EN ISO 21832:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 21832:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 21832:2020


EN ISO 21832
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 13.040.30 Supersedes EN 13890:2009
English Version

Workplace air - Metals and metalloids in airborne particles
- Requirements for evaluation of measuring procedures
(ISO 21832:2018)
Air des lieux de travail - Métaux et métalloïdes dans les Luft am Arbeitsplatz - Metalle und Metalloide in
particules en suspension dans l'air - Exigences luftgetragenen Partikeln - Anforderungen an die
relatives à l'évaluation des procédures de mesure (ISO Evaluation von Messverfahren (ISO 21832:2018)
21832:2018)
This European Standard was approved by CEN on 28 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21832:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 21832:2020
EN ISO 21832:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 21832:2020
EN ISO 21832:2020 (E)
European foreword
The text of ISO 21832:2018 has been prepared by Technical Committee ISO/TC 146 "Air quality” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 21832:2020 by
Technical Committee CEN/TC 137 “Assessment of workplace exposure to chemical and biological
agents” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13890:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 21832:2018 has
...

SLOVENSKI STANDARD
oSIST prEN ISO 21832:2020
01-januar-2020
Zrak na delovnem mestu - Kovine in polkovine v lebdečih delcih - Zahteve za
vrednotenje merilnih postopkov (ISO 21832:2018)
Workplace air - Metals and metalloids in airborne particles - Requirements for evaluation
of measuring procedures (ISO 21832:2018)
Luft am Arbeitsplatz - Metalle und Metalloide in luftgetragenen Partikeln - Anforderungen
an die Evaluation von Messverfahren (ISO 21832:2018)
Air des lieux de travail - Métaux et métalloïdes dans les particules en suspension dans
l'air - Exigences relatives à l'évaluation des procédures de mesure (ISO 21832:2018)
Ta slovenski standard je istoveten z: prEN ISO 21832
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
oSIST prEN ISO 21832:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 21832:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 21832:2020
INTERNATIONAL ISO
STANDARD 21832
First edition
2018-11
Workplace air — Metals and
metalloids in airborne particles
— Requirements for evaluation of
measuring procedures
Air des lieux de travail — Métaux et métalloïdes dans les particules
en suspension dans l'air — Exigences relatives à l'évaluation des
procédures de mesure
Reference number
ISO 21832:2018(E)
©
ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 21832:2020
ISO 21832:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 21832:2020
ISO 21832:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Requirements . 3
5.1 Method description . 3
5.1.1 Application range . 3
5.1.2 Method performance . . . 3
5.1.3 Safety information . 3
5.1.4 Samplers. 3
5.1.5 Sampling pumps .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.