Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements

1.1   Purpose
This European standard establishes requirements when implementing statistical product acceptance methods to meet defined risk requirements. This standard also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods.
These general requirements and documented procedures apply the requirements of the EN 9100/EN 9110/EN 9120 quality management system standards, in addition to establishing requirements for retrievability, safety/critical characteristics, and quality parameters that protect the customer.
1.2   Application
This standard is applicable when invoked in a purchasing contract or specification, contractual document, customer agreement, or adopted by the organization. The purchase contract/agreement may or may not identify the appropriate EN 9138 clause(s) to be applied by the organization. All statistical methods of product acceptance require the use of Clause 4 and Clause 5.
To accept product produced:
- by individual lots, see Clause 6;
- under switching rules, see Clause 7;
- under process controls, see Clause 8; and
- by continuous sampling or special case methods, see Clause 9.

Luft- und Raumfahrt - Qualitätsmanagementsysteme - Statistische Anforderungen für die Produktannahme

1.1 Zweck
Diese Europäische Norm legt die Anforderungen für die Einführung statistischer Verfahren für die Pro-duktannahme zur Erfüllung festgelegter Risikoanforderungen fest. Diese Norm legt auch den erforderlichen Mindestinhalt fest, der in den dokumentierten Verfahren einer Organisation zu behandeln ist, die die Anwendung von statistischen Verfahren für die Produktannahme regeln.
Diese allgemeinen Anforderungen und dokumentierten Verfahren wenden die Anforderungen nach den Qualitätsmanagementsystemnormen EN 9100/EN 9110/EN 9120 an, zusätzlich zur Festlegung von Anfor-derungen an die Rückholbarkeit, Sicherheitsmerkmale/kritische Merkmale und Qualitätsparameter, die den Kunden schützen.
1.2 Anwendung
Diese Norm gilt, wenn sich ein Kaufvertrag oder eine Spezifikation, Vertragsdokument, Kundenvereinbarung darauf berufen oder sie von der Organisation übernommen wird. Der/Die Kaufvertrag/-vereinbarung darf den/die entsprechenden Abschnitt/Abschnitte nach EN 9138 benennen, der/die von der Organisation anzu¬wenden ist/sind oder dies unterlassen. Alle statistischen Verfahren für die Produktannahme erfordern die Anwendung von Abschnitt 4 und Abschnitt 5.
Um Produkte anzunehmen, die hergestellt wurden
- durch Einzellose, siehe Abschnitt 6,
- unter Variierung des Prüfumfangs, siehe Abschnitt 7,
- mit Prozessüberwachungen, siehe Abschnitt 8 und
- durch kontinuierliche Stichprobenahme oder Verfahren für Sonderfälle, siehe Abschnitt 9.

Série aérospatiale - Systèmes de management de la qualité - Exigences d'acceptation statistique des produits

La présente norme s’applique lorsqu’elle est invoquée dans un contrat d’achat ou une spécification, un document contractuel, un contrat client ou qu’elle est adoptée par l’organisme. L’accord/contrat d’achat peut identifier ou non le(s) article(s) approprié(s) de l’EN 9138 à appliquer par l’organisme. Toutes les méthodes statistiques d’acceptation des produits exigent d’utiliser les Articles 4 et 5.
Pour accepter le produit fabriqué :
- en lots individuels, voir l’Article 6 ;
- conformément aux règles de modification du contrôle, voir l’Article 7 ;
- conformément aux maîtrises du processus, voir l’Article 8 ; et
- par échantillonnage continu ou à l’aide de méthodes pour cas particuliers, voir l’Article 9.

Aeronavtika - Sistemi vodenja kakovosti - Statistični proizvod - Zahteve za sprejem

Ta dokument določa zahteve pri izvajanju metod sprejemanja statističnega proizvoda za izpolnjevanje določenih zahtev glede tveganja. Standard prav tako določa minimalno vsebino, ki mora biti zajeta v dokumentiranih postopkih organizacije, ki ureja uporabo metod sprejemanja statističnega proizvoda. Te splošne zahteve in dokumentirani postopki upoštevajo zahteve iz standardov za sisteme vodenja kakovosti EN 9100/EN 9110/EN 9120, poleg tega pa določajo zahteve za dostopnost, varnostne/kritične značilnosti in parametre za kakovost, ki varujejo potrošnika. Uporaba: Ta standard se uporablja ob sklicevanju nanj v prodajni pogodbi ali specifikaciji, pogodbenem dokumentu, pogodbi z uporabnikom, ali če ga sprejme organizacija. V prodajni pogodbi/dogovoru bodo morda upoštevane ustrezne točke standarda EN 9138, ki jih mora organizacija uveljaviti. Vse statistične metode za sprejem proizvoda zahtevajo uporabo točk 4 in 5. Za sprejem izdelanega proizvoda: – po posameznih serijah, glej točko 6; – pod pravili za zamenjavo, glej točko 7; – pod nadzori procesov, glej točko 8; in – z neprekinjenim vzorčenjem ali po metodah posebnih primerov, glej točko 9.

General Information

Status
Published
Publication Date
05-Nov-2019
Withdrawal Date
30-May-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Nov-2019
Completion Date
06-Nov-2019

Buy Standard

Standard
EN 9138:2020
English language
110 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 9138:2020
01-januar-2020
Aeronavtika - Sistemi vodenja kakovosti - Statistični proizvod - Zahteve za sprejem
Aerospace Series - Quality Management Systems - Statistical Product - Acceptance
Requirements
Luft- und Raumfahrt - Qualitätsmanagementsysteme - Statistische
Produktannahmeanforderungen
Série Aérospatiale - Système de management de la qualité - Exigences d'acceptation
statistique des produits
Ta slovenski standard je istoveten z: EN 9138:2019
ICS:
03.120.10 Vodenje in zagotavljanje Quality management and
kakovosti quality assurance
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN 9138:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 9138:2020

---------------------- Page: 2 ----------------------
SIST EN 9138:2020


EN 9138
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2019
EUROPÄISCHE NORM
ICS 03.120.10; 49.020
English Version

Aerospace Series - Quality Management Systems -
Statistical Product - Acceptance Requirements
Série aérospatiale - Systèmes de management de la Luft- und Raumfahrt - Qualitätsmanagementsysteme -
qualité - Exigences d'acceptation statistique des Statistische Produktannahmeanforderungen
produits
This European Standard was approved by CEN on 10 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9138:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 9138:2020
EN 9138:2019 (E)
Contents
Page
0.1 Paradigm of quality requirements and product acceptance plans . 11
0.1.1 Engineering . 11
0.1.2 Operations . 12
0.2 Acceptance method considerations . 12
1 Scope . 15
1.1 Purpose . 15
1.2 Application . 15
2 Normative references . 15
2.1 International Aerospace Quality Group publications . 15
2.2 American National Standards Institute publications . 16
2.3 International Organization for Standardization publications . 16
2.4 Japanese standards . 17
2.5 Published books and periodicals . 17
2.6 SAE International publications .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.