Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed bearers for switches and crossings

This part of the EN 13230 series defines additional technical criteria and control procedures as well as specific tolerance limits related to manufacturing and testing prestressed bearers for switches and crossings with a maximum length of 8,5 m.
Bearers longer than 8,5 m are considered as special elements and will comply with FprEN 13230 5:2015.

Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 4: Spannbetonschwellen für Weichen und Kreuzungen

Dieser Teil der Normenreihe EN 13230 legt die zusätzlichen technischen Kriterien und Kontrollverfahren sowie die spezifischen Grenzabweichungen in Bezug auf die Herstellung und Prüfung von Spannbetonschwellen für Weichen und Kreuzungen mit einer maximalen Länge von 8,5 m fest.
Weichenschwellen von mehr als 8,5 m Länge werden als Sonderformen bezeichnet und sind in EN 13230 5:2016 enthalten.

Applications ferroviaires - Voie - Traverses et supports en béton - Partie 4 : Supports précontraints pour appareil de voie

La présente partie de la série EN 13230 définit les prescriptions spécifiques relatives aux supports en béton précontraint pour appareils de voie.
Ces prescriptions s'ajoutent à celles de l' EN 13230 1:2016 et sont nécessaires pour disposer d'une norme complète traitant des supports en béton précontraint pour appareils de voie.
Le document spécifie les montages d’essais et procédures d’essai à mettre en œuvre ainsi que les critères d’acceptation comme les essais de qualification.

Železniške naprave - Zgornji ustroj proge - Betonski pragi in kretniški betonski pragi - 4. del: Prednapeti betonski pragi za kretnice in križišča

General Information

Status
Published
Publication Date
11-Feb-2020
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Dec-2021

Relations

Buy Standard

Standard
EN 13230-4:2016+A1:2020
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13230-4:2016+A1:2020
01-april-2020
Železniške naprave - Zgornji ustroj proge - Betonski pragi in kretniški betonski
pragi - 4. del: Prednapeti betonski pragi za kretnice in križišča
Railway applications - Track - Concrete sleepers and bearers - Part 4: Prestressed
bearers for switches and crossings
Bahnanwendungen - Oberbau - Gleis- und Weichenschwellen aus Beton - Teil 4:
Spannbetonschwellen für Weichen und Kreuzungen
Applications ferroviaires - Voie - Traverses et supports en béton - Partie 4 : Supports
précontraints pour appareil de voie
Ta slovenski standard je istoveten z: EN 13230-4:2016+A1:2020
ICS:
45.080 Tračnice in železniški deli Rails and railway
components
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 13230-4:2016+A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13230-4:2016+A1:2020

---------------------- Page: 2 ----------------------
SIST EN 13230-4:2016+A1:2020


EN 13230-4:2016+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 91.100.30; 93.100
English Version

Railway applications - Track - Concrete sleepers and
bearers - Part 4: Prestressed bearers for switches and
crossings
Applications ferroviaires - Voie - Traverses et supports Bahnanwendungen - Oberbau - Gleis- und
en béton - Partie 4 : Supports précontraints pour Weichenschwellen aus Beton - Teil 4:
appareil de voie Spannbetonschwellen für Weichen und Kreuzungen
This European Standard was approved by CEN on 4 March 2016 and includes Amendment 1 approved by CEN on 10 June 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13230-4:2016+A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13230-4:2016+A1:2020
EN 13230-4:2016+A1:2020 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and symbols . 6
3.1 Terms and definitions . 6
3.2 Symbols . 7
4 Special requirement . 7
4.1 Characteristic bending moments . 7
4.2 Positioning of fastening components . 7
4.3 Tolerances .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.