Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2019)

This document specifies requirements for the content of welding procedure specifications for arc welding processes.
Details of the ISO 15609 series are given in ISO 15607. The variables listed in this document are those influencing the quality of the welded joint.

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißanweisung - Teil 1: Lichtbogenschweißen (ISO 15609-1:2019)

Dieses Dokument legt die Anforderungen an den Inhalt der Schweißanweisungen für Lichtbogen-schweißprozesse fest.
Details zu der Normenreihe ISO 15609 sind in ISO 15607 enthalten. In diesem Dokument sind solche Einflussgrößen aufgeführt, die die Qualität der Schweißverbindung beeinflussen.

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Descriptif d'un mode opératoire de soudage - Partie 1: Soudage à l'arc (ISO 15609-1:2019)

Le présent document spécifie les exigences relatives au contenu des descriptifs de modes opératoires de soudage pour les procédés de soudage à l'arc.
Les détails des normes de la série ISO 15609 sont donnés dans l'ISO 15607. Les variables énumérées dans présent document sont celles qui ont une influence sur la qualité de l'assemblage soudé.

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Popis varilnega postopka - 1. del: Obločno varjenje (ISO 15609-1:2019)

Ta dokument določa zahteve za vsebino specifikacij varilnega postopka za postopke obločnega varjenja. Podrobnosti o skupini ISO 15609 so podane v standardu ISO 15607. Spremenljivke, ki so navedene v tem dokumentu, vplivajo na kakovost varjenega spoja.

General Information

Status
Published
Publication Date
01-Oct-2019
Withdrawal Date
29-Apr-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
02-Oct-2019
Completion Date
02-Oct-2019

Relations

Buy Standard

Standard
EN ISO 15609-1:2020 (EN)
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 15609-1:2020 (DE)
German language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 15609-1:2018
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15609-1:2020
01-marec-2020
Nadomešča:
SIST EN ISO 15609-1:2005
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Popis varilnega
postopka - 1. del: Obločno varjenje (ISO 15609-1:2019)
Specification and qualification of welding procedures for metallic materials - Welding
procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißanweisung - Teil 1: Lichtbogenschweißen (ISO 15609-1:2019)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Descriptif d'un mode opératoire de soudage - Partie 1: Soudage à l'arc
(ISO 15609-1:2019)
Ta slovenski standard je istoveten z: EN ISO 15609-1:2019
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 15609-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15609-1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 15609-1:2020


EN ISO 15609-1
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2019
EUROPÄISCHE NORM
ICS 25.160.10 Supersedes EN ISO 15609-1:2004
English Version

Specification and qualification of welding procedures for
metallic materials - Welding procedure specification - Part
1: Arc welding (ISO 15609-1:2019)
Descriptif et qualification d'un mode opératoire de Anforderung und Qualifizierung von Schweißverfahren
soudage pour les matériaux métalliques - Descriptif für metallische Werkstoffe - Schweißanweisung - Teil
d'un mode opératoire de soudage - Partie 1: Soudage à 1: Lichtbogenschweißen (ISO 15609-1:2019)
l'arc (ISO 15609-1:2019)
This European Standard was approved by CEN on 26 August 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15609-1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 15609-1:2020
EN ISO 15609-1:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 15609-1:2020
EN ISO 15609-1:2019 (E)
European foreword
This document (EN ISO 15609-1:2019) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15609-1:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO
...

SLOVENSKI STANDARD
SIST EN ISO 15609-1:2020
01-marec-2020
Nadomešča:
SIST EN ISO 15609-1:2005
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Popis varilnega
postopka - 1. del: Obločno varjenje (ISO 15609-1:2019)
Specification and qualification of welding procedures for metallic materials - Welding
procedure specification - Part 1: Arc welding (ISO 15609-1:2019)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißanweisung - Teil 1: Lichtbogenschweißen (ISO 15609-1:2019)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Descriptif d'un mode opératoire de soudage - Partie 1: Soudage à l'arc
(ISO 15609-1:2019)
Ta slovenski standard je istoveten z: EN ISO 15609-1:2019
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 15609-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15609-1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 15609-1:2020


EN ISO 15609-1
EUROPÄISCHE NORM

EUROPEAN STANDARD

Oktober 2019
NORME EUROPÉENNE
ICS 25.160.10 Ersetzt EN ISO 15609-1:2004
Deutsche Fassung

Anforderung und Qualifizierung von Schweißverfahren für
metallische Werkstoffe - Schweißanweisung - Teil 1:
Lichtbogenschweißen (ISO 15609-1:2019)
Specification and qualification of welding procedures Descriptif et qualification d'un mode opératoire de
for metallic materials - Welding procedure specification soudage pour les matériaux métalliques - Descriptif
- Part 1: Arc welding (ISO 15609-1:2019) d'un mode opératoire de soudage - Partie 1: Soudage à
l'arc (ISO 15609-1:2019)
Diese Europäische Norm wurde vom CEN am 26. August 2019 angenommen.

Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter
denen dieser Europäischen Norm ohne jede Änderung der Status einer nationalen Norm zu geben ist. Auf dem letzten Stand
befindliche Listen dieser nationalen Normen mit ihren bibliographischen Angaben sind beim CEN-CENELEC-Management-
Zentrum oder bei jedem CEN-Mitglied auf Anfrage erhältlich.

Diese Europäische Norm besteht in drei offiziellen Fassungen (Deutsch, Englisch, Französisch). Eine Fassung in einer anderen
Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem
Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, Estland, Finnland,
Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland, Litauen, Luxemburg, Malta, den Niederlanden, Norwegen,
Österreich, Polen, Portugal, der Republik Nordmazedonien, Rumänien, Schweden, der Schweiz, Serbien, der Slowakei, Slowenien,
Spanien, der Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und Zypern.





EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

CEN-CENELEC Management-Zentrum: Rue de la Science 23, B-1040 Brüssel
© 2019 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. EN ISO 15609-1:2019 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN
vorbehalten.

---------------------- Page: 3 ----------------------
SIST EN ISO 15609-1:2020
EN ISO 15609-1:2019 (D)
Inhalt
Seite
Europäisches Vorwort . 3
Vorwort . 4
Einleitung . 5
1 Anwendungsbereich . 6
2 Normative Verweisungen . 6
3 Begriffe . 6
4 Technischer Inhalt der Schweißanweisung (WPS) . 6
4.1 Allgemeines .
...

SLOVENSKI STANDARD
oSIST prEN ISO 15609-1:2018
01-september-2018
3RSLVLQNYDOLILNDFLMDYDULOQLKSRVWRSNRY]DNRYLQVNHPDWHULDOH3RSLVYDULOQHJD
SRVWRSND±GHO2EORþQRYDUMHQMH ,62',6
Specification and qualification of welding procedures for metallic materials - Welding
procedure specification - Part 1: Arc welding (ISO/DIS 15609-1:2018)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißanweisung - Teil 1: Lichtbogenschweißen (ISO/DIS 15609-1:2018)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Descriptif d'un mode opératoire de soudage - Partie 1: Soudage à l'arc
(ISO/DIS 15609-1:2018)
Ta slovenski standard je istoveten z: prEN ISO 15609-1
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 15609-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 15609-1:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 15609-1:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15609-1
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2018-06-18 2018-09-10
Specification and qualification of welding procedures for
metallic materials — Welding procedure specification —
Part 1:
Arc welding
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Descriptif
d'un mode opératoire de soudage —
Partie 1: Soudage à l'arc
ICS: 25.160.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15609-1:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 15609-1:2018
ISO/DIS 15609-1:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 15609-1:2018
ISO/DIS 15609-1:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Technical content of welding procedure specification (WPS).2
4.1 General . 2
4.2 Related to the manufacturer .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.