Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02)

ISO 10077-1:2017 specifies methods for the calculation of the thermal transmittance of windows and pedestrian doors consisting of glazed and/or opaque panels fitted in a frame, with and without shutters.

Wärmetechnisches Verhalten von Fenstern, Türen und Abschlüssen - Berechnung des Wärmedurchgangskoeffizienten - Teil 1: Allgemeines (ISO 10077-1:2017, korrigierte Fassung 2020-02)

Performance thermique des fenêtres, portes et fermetures - Calcul du coefficient de transmission thermique - Partie 1: Généralités (ISO 10077-1:2017, Version corrigée 2020-02)

L'ISO 10077-1:2017 spécifie des méthodes de calcul du coefficient de transmission thermique des fenêtres et des portes pour piétons constituées de panneaux vitrés et/ou opaques montés dans un cadre, avec ou sans fermetures.

Toplotne značilnosti oken, vrat in polken - Izračun toplotne prehodnosti - 1. del: Splošno (ISO 10077-1:2017, popravljena različica 2020-02)

Ta dokument določa metode za izračun toplotne prehodnosti oken in vrat za pešce, sestavljenih iz steklenih in/ali prosojnih plošč, nameščenih v okvirje, s polkni ali brez njih.
Ta dokument se uporablja za:
– različne vrste zasteklitve (iz stekla ali plastike, enojna ali večkratna zasteklitev, z nanosom ali brez nanosa nizke emisivnosti in s prostori, napolnjenimi z zrakom ali drugimi plini);
– prosojne plošče v oknih ali vratih;
– različne vrste okvirjev (leseni, plastični, kovinski s termično prevleko ali brez nje, kovinski s točkastimi kovinskimi povezavami ali katera koli kombinacija materialov); in
– dodatno toplotno upornost različnih vrst zaprtih polken ali zunanjih žaluzij, kjer je to ustrezno, odvisno od njihove zračne prepustnosti.
Toplotna prehodnost strešnih oken in drugih štrlečih oken se lahko izračuna v skladu s tem dokumentom pod pogojem, da je toplotna prehodnost njihovih okvirjev določena na podlagi meritev ali številskega izračuna.
Privzete vrednosti za zasteklitev, okvirje in polkna so podane v dodatkih. Izračun ne vključuje učinkov toplotnih mostov v utorih ali spojih med okenskim ali vratnim okvirjem in ovojem stavbe.
Izračun ne vključuje:
– učinkov sončnega sevanja (glej standarde v razdelku M2-8);
– prenos toplote zaradi puščanja zraka (glej standarde v razdelku M2-6);
– izračun kondenzacije;
– prezračevanje zračnih prostorov v dvojnih ali spojenih oknih; in
– obstranski deli polkrožnih oken.
Ta dokument se ne uporablja za:
– predelne stene in druge strukturne zasteklitve (glej druge standarde v razdelku M2-5); in
– industrijska, komercialna in garažna vrata.
OPOMBA: Preglednica 1 v uvodu prikazuje relativno mesto tega dokumenta znotraj skupine standardov EPB v kontekstu modularne strukture, kot je opredeljeno v standardu ISO 52000-1.

General Information

Status
Published
Publication Date
18-Jul-2017
Withdrawal Date
18-Jan-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Jul-2017
Completion Date
19-Jul-2017

Relations

Buy Standard

Standard
EN ISO 10077-1:2017
English language
52 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 10077-1:2017 - natisnjeno za čitalnico
English language
53 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN ISO 10077-1:2017
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10077-1:2017
01-september-2017
Nadomešča:
SIST EN ISO 10077-1:2007
SIST EN ISO 10077-1:2007/AC:2010
Toplotne značilnosti oken, vrat in polken - Izračun toplotne prehodnosti - 1. del:
Splošno (ISO 10077-1:2017, popravljena različica 2020-02)
Thermal performance of windows, doors and shutters - Calculation of thermal
transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02)
Wärmetechnisches Verhalten von Fenstern, Türen und Abschlüssen - Berechnung des
Wärmedurchgangskoeffizienten - Teil 1: Allgemeines (ISO 10077-1:2017)
Performance thermique des fenêtres, portes et fermetures - Calcul du coefficient de
transmission thermique - Partie 1: Généralités (ISO 10077-1:2017)
Ta slovenski standard je istoveten z: EN ISO 10077-1:2017
ICS:
91.060.50 Vrata in okna Doors and windows
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN ISO 10077-1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 10077-1:2017

---------------------- Page: 2 ----------------------
SIST EN ISO 10077-1:2017


EN ISO 10077-1
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2017
EUROPÄISCHE NORM
ICS 91.060.50; 91.120.10 Supersedes EN ISO 10077-1:2006
English Version

Thermal performance of windows, doors and shutters -
Calculation of thermal transmittance - Part 1: General (ISO
10077-1:2017, Corrected version 2020-02)
Performance thermique des fenêtres, portes et Wärmetechnisches Verhalten von Fenstern, Türen und
fermetures - Calcul du coefficient de transmission Abschlüssen - Berechnung des
thermique - Partie 1: Généralités (ISO 10077-1:2017, Wärmedurchgangskoeffizienten - Teil 1: Allgemeines
Version corrigée 2020-02) (ISO 10077-1:2017, korrigierte Fassung 2020-02)
This European Standard was approved by CEN on 27 February 2017.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 18 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10077-1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 10077-1:2017
EN ISO 10077-1:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 10077-1:2017
EN ISO 10077-1:2017 (E)
European foreword
This document (EN ISO 10077-1:2017) has been prepared by Technical Committee CEN/TC 89
“Thermal performance of buildings and building components”, the secretariat of which is held by SIS, in
collaboration with Technical Committee ISO/TC 163 "Thermal performance and energy use in the built
environment".
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2018 and conflicting national standards shall
be withdrawn at the latest by January 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document is part of the set of standards on the energy performance of buildings (the set of EPB
standards) and has been prepared under a mandate given to CEN by the European Comm
...

SLOVENSKI STANDARD
SIST EN ISO 10077-1:2017
01-september-2017
1DGRPHãþD
SIST EN ISO 10077-1:2007
SIST EN ISO 10077-1:2007/AC:2010
7RSORWQH]QDþLOQRVWLRNHQYUDWLQSRONHQ,]UDþXQWRSORWQHSUHKRGQRVWLGHO
6SORãQR ,62
Thermal performance of windows, doors and shutters - Calculation of thermal
transmittance - Part 1: General (ISO 10077-1:2017)
Wärmetechnisches Verhalten von Fenstern, Türen und Abschlüssen - Berechnung des
Wärmedurchgangskoeffizienten - Teil 1: Allgemeines (ISO 10077-1:2017)
Performance thermique des fenêtres, portes et fermetures - Calcul du coefficient de
transmission thermique - Partie 1: Généralités (ISO 10077-1:2017)
Ta slovenski standard je istoveten z: EN ISO 10077-1:2017
ICS:
91.060.50 Vrata in okna Doors and windows
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN ISO 10077-1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10077-1:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 10077-1:2017


EN ISO 10077-1
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2017
EUROPÄISCHE NORM
ICS 91.060.50; 91.120.10 Supersedes EN ISO 10077-1:2006
English Version

Thermal performance of windows, doors and shutters -
Calculation of thermal transmittance - Part 1: General (ISO
10077-1:2017)
Performance thermique des fenêtres, portes et Wärmetechnisches Verhalten von Fenstern, Türen und
fermetures - Calcul du coefficient de transmission Abschlüssen - Berechnung des
thermique - Partie 1: Généralités (ISO 10077-1:2017) Wärmedurchgangskoeffizienten - Teil 1: Allgemeines
(ISO 10077-1:2017)
This European Standard was approved by CEN on 27 February 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10077-1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10077-1:2017
EN ISO 10777-1:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 10077-1:2017
EN ISO 10777-1:2017 (E)
European foreword
This document (EN ISO 10777-1:2017) has been prepared by Technical Committee CEN/TC 89
“Thermal performance of buildings and building components”, the secretariat of which is held by SIS, in
collaboration with Technical Committee ISO/TC 163 "Thermal performance and energy use in the built
environment".
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2018 and conflicting national standards shall
be withdrawn at the latest by January 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document is part of the set of standards on the energy performance of buildings (the set of EPB
standards) and has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association (Mandate M/480, see reference [EF1] below), and supports essential
requirements of EU Directive 2010/31/EC on the energy performance of buildings (EPBD, [EF2]).
In case this standard is used in the con
...

SLOVENSKI STANDARD
kSIST FprEN ISO 10077-1:2017
01-januar-2017
7RSORWQHODVWQRVWLRNHQYUDWLQSRONHQ,]UDþXQWRSORWQHSUHKRGQRVWLGHO
6SORãQR ,62)',6
Thermal performance of windows, doors and shutters - Calculation of thermal
transmittance - Part 1: General (ISO/FDIS 10077-1:2016)
Wärmetechnisches Verhalten von Fenstern, Türen und Abschlüssen - Berechnung des
Wärmedurchgangskoeffizienten - Teil 1: Allgemeines (ISO/FDIS 10077-1:2016)
Performance thermique des fenêtres, portes et fermetures - Calcul du coefficient de
transmission thermique - Partie 1: Généralités (ISO/FDIS 10077-1:2016)
Ta slovenski standard je istoveten z: FprEN ISO 10077-1
ICS:
91.060.50 Vrata in okna Doors and windows
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
kSIST FprEN ISO 10077-1:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN ISO 10077-1:2017

---------------------- Page: 2 ----------------------
kSIST FprEN ISO 10077-1:2017
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 10077-1
ISO/TC 163/SC 2
Thermal performance of windows,
Secretariat: SN
doors and shutters — Calculation of
Voting begins on:
2016-10-31 thermal transmittance —
Voting terminates on:
Part 1:
2016-12-26
General
Performance thermique des fenêtres, portes et fermetures — Calcul
du coefficient de transmission thermique —
Partie 1: Généralités
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 10077-1:2016(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2016

---------------------- Page: 3 ----------------------
kSIST FprEN ISO 10077-1:2017
ISO/FDIS 10077-1:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved

---------------------- Page: 4 ----------------------
kSIST FprEN ISO 10077-1:2017
ISO/FDIS 10077-1:2016(E)

Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and subscripts . 3
4.1 Symbols . 3
4.2 Subscripts . 3
5 Description of the method . 4
5.1 Output of the method .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.