iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15162:2008

(Main)

Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

This standard applies to monoblade or multiblade gang saws, as defined in 3.1, for cutting marble, granite, other types of natural stone, artificial or natural conglomerates and similar materials.
This standard does not deal with noise as a significant hazard.
This standard deals with all significant hazards, hazardous situations and events relevant to gang saw ma-chines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals with the hazards during transport, commissioning, use and maintenance.
This document is not applicable to gang saws which are manufactured before the date of its publication as EN.

Maschinen und Anlagen zur Gewinnung und Bearbeitung von Naturstein - Sicherheitsanforderungen für Gattersägen

Diese Norm gilt für ein- oder mehrblättrige Gattersägen, wie in 3.1 definiert, zum Schneiden von Marmor, Granit, anderen Arten von Naturstein, künstlichen oder natürlichen Konglomeraten und ähnlichen Materialien.
Diese Norm behandelt keine signifikanten Gefährdungen bezüglich Lärm.
Diese Norm behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf Gattersägen zutreffen, wenn sie bestimmungsgemäß und unter Bedingungen des Missbrauchs, die vernünftigerweise vom Hersteller vorhersehbar sind, verwendet werden (siehe Abschnitt 4). Diese Europäische Norm behandelt Gefährdungen während des Transports, der Inbetriebnahme, der Bedienung und Wartung.
Dieses Dokument gilt nicht für Gattersägen, die vor dem Datum seiner Veröffentlichung als EN hergestellt sind.

Machines et installations d'extraction et d'usinage des pierres naturelles - Prescriptions de sécurité pour les scies alternatives

La présente norme s'applique aux scies alternatives monolame ou à lames multiples, tel que défini en 3.1, utilisées pour la découpe du marbre, du granite, d'autres types de pierre naturelle, de conglomérats artificiels ou naturels, ainsi que de matériaux similaires.
La présente norme ne traite pas le phénomène dangereux significatif du bruit.
La présente norme traite tous les phénomènes, situations et événements dangereux significatifs relatifs aux scies alternatives, lorsqu'elles sont utilisées dans des conditions normales et dans des conditions de mauvaise utilisation raisonnablement prévisibles par le constructeur (voir Article 4).
La présente Norme européenne traite des phénomènes dangereux pendant le transport, la mise en service, l’utilisation et la maintenance.
Le présent document n'est pas applicable aux scies alternatives qui ont été fabriqué(e)s avant sa date de publication comme EN.

Stroji in obrati za pridobivanje in obdelavo naravnega kamna - Varnostne zahteve za žage za rezanje v plošče

General Information

Status
Published
Publication Date
20-May-2008
Withdrawal Date
29-Nov-2008
ICS
73.120 - Equipment for processing of minerals
Technical Committee
CEN/TC 151 - Construction equipment and building material machines - Safety
Drafting Committee
CEN/TC 151/WG 11 - Machines and plants for mining and tooling of natural stone - Safety
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
19-May-2021
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN 15162:2008 - Machines and plants for mining and tooling of natural stone - Safety requirements for gang saws

Buy Standard

EN 15162:2008EN 15162:2008
PreviousNext
Standard
EN 15162:2008
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15162:2008
01-september-2008
6WURMLLQREUDWL]DSULGRELYDQMHLQREGHODYRQDUDYQHJDNDPQD9DUQRVWQH]DKWHYH
]DåDJH]DUH]DQMHYSORãþH
Machines and plants for mining and tooling of natural stone - Safety requirements for
gang saws
Maschinen und Anlagen zur Gewinnung und Bearbeitung von Naturstein -
Sicherheitsanforderungen für Gattersägen
Machines et installations d'extraction et d'usinage des pierres naturelles - Prescriptions
de sécurité pour les scies alternatives
Ta slovenski standard je istoveten z: EN 15162:2008
ICS:
25.100.01 Rezalna orodja na splošno Cutting tools in general
73.120 Oprema za predelavo rudnin Equipment for processing of
minerals
SIST EN 15162:2008 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 15162
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 73.120

English Version
Machines and plants for mining and tooling of natural stone -
Safety requirements for gang saws
Machines et installations d'extraction et d'usinage des Maschinen und Anlagen zur Gewinnung und Bearbeitung
pierres naturelles - Prescriptions de sécurité pour les scies von Naturstein - Sicherheitsanforderungen für Gattersägen
alternatives
This European Standard was approved by CEN on 18 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15162:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 15162:2008 (E)
Contents Page
Foreword.4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .7
4 List of significant hazards .11
5 Safety requirements and/or protective measures.11
5.1 General.11
5.2 Protection against mechanical hazards .12
5.2.1 Locking the carriage.12
5.2.2 End run of blade frame.12
5.2.3 Hazard of belt breakage .13
5.2.4 Guards around motor and flywheel area.14
5.2.5 Slabs-holding device.14
5.2.6 Access to machine .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15163-2:2022(Main)
Machines and installations for the exploitation and processing of natural stone - Safety - Part 2: Requirements for transportable diamond wire saws
SIST EN 15163-2:2022

This document deals with all significant hazards, hazardous situations and events which are relevant to transportable diamond wire saws, used in quarries for cutting natural stones (e.g. marble, granite), when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
For this document, the intended use of machine is limited by the following cutting operations, defined in Clause 3:
1)   vertical cut (see 3.16);
a)   mountain vertical cut (see 3.16.1);
b)   mountain side vertical cut (see 3.16.2);
c)   block vertical cut (see 3.16.3);
d)   overhead underslung vertical cut (see 3.16.4);
2)   horizontal cut (see 3.17);
a)   horizontal cut with one side open (see 3.17.1);
b)   horizontal cut with two sides open (see 3.17.2);
3)   block inclined cut (see 3.18).
Cutting operations listed above are performed without any path variation (see 3.11).
This document does not deal with any other cutting operation not listed above or defined in Clause 3.
This document deals only with transportable diamond wire saws using coated diamond wire as tool.
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals with all significant hazards that could occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document does not deal with the significant hazards arising by the use of other facilities/devices not described in this document, that could be fitted on the machines or that could be used during the work cycle.
This document does not apply to:
i)   machines intended for operation in a potentially explosive atmosphere;
ii)   machines which are manufactured before the date of publication of this document.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15163-1:2022(Main)
Machines and installations for the exploitation and processing of natural stone - Safety - Part 1: Requirements for stationary diamond wire saws
SIST EN 15163-1:2022

This document deals with all significant hazards, hazardous situations and events, as listed in Annex A, which are relevant to stationary diamond wire saws (stationary diamond mono-wire saws and stationary diamond multi-wire saws), as defined in Clause 3.
Stationary diamond wire saws may be used in quarries or in sawmill for cutting natural stones (e.g. marble, granite), when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document deals only with stationary diamond wire saws using coated diamond wire as tool.
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals all significant hazards that may occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document does not deal with the significant hazards arising by the use of other facilities/devices not described in this document, that may be fitted on the machines or that may be used during the work cycle.
This document does not deal with:
a)   operation under extreme ambient conditions (outside the limits defined in EN 60204-1:2018);
b)   upstream and downstream conveying elements, not integrated with stationary diamond wire saws, for transporting of the work-pieces.
This document is not applicable to machines which are manufactured before the date of publication of this document by CEN.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16564:2020(Main)
Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
SIST EN 16564:2021

This document deals with all significant hazards, hazardous situations and events which are relevant to:
-   bridge sawing machines;
-   bridge sawing and milling machines;
-   numerical control bridge sawing/milling machines.
These machines are designed to saw and mill natural stone and engineered/agglomerated stone as defined by EN 14618:2009, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals with the foreseeable lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document also applies to machines fitted with the following facilities/devices:
-   mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
-   automatic tool change;
-   loading and unloading conveyor system;
-   tilting and/or rotating head axis;
-   rotating workpiece support(s);
-   tilting workpiece support(s) when loading;
-   lathe unit;
-   undercut grooving unit;
-   axes operating in accordance with an NC work programme.
This document does not apply to:
-   machines intended for operation in a potentially explosive atmosphere;
-   machines operating in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
-   machines intended for outdoor operation;
-   machines which are manufactured before the date of their publication as EN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15571:2020(Main)
Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines
SIST EN 15571:2021

This document applies to stationary surface-finishing machines with stationary work piece (see 3.1) or with moving work piece (see 3.2) which are used to grind or polish horizontal surfaces of slabs, strips or tiles of natural stone and engineered stone (e.g. agglomerated stone) as defined by EN 14618:2009.
This document deals with all significant hazards, hazardous situations and events relevant to surface-finishing machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals with the foreseeable lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document does not deal with:
-   hand-held grinding machines;
-   machines intended for operation in a potentially explosive atmosphere;
-   operation in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
-   machines intended for outdoor operation.
This document is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1009-1:2020(Main)
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 1: Common requirements for machinery and processing plants
SIST EN 1009-1:2020

This document applies to machines for mechanical processing of minerals (cement, lime and gypsum, sand and gravel, industrial minerals, metalliferous ore and hard and soft rock aggregates, coal) and -products (slag and ashes, production and demolition waste) in construction and industry.
It deals with the following types of individual machines for the mechanical processing of minerals and similar solid materials:
-   feeding machinery in accordance with EN 1009-2;
-   crushing machinery in accordance with EN 1009-3;
-   milling machinery in accordance with EN 1009-3;
-   screening machinery in accordance with EN 1009-4;
-   machinery for cleaning, water recycling, sorting (other than screens) and mud treatment in accordance with EN 1009-5;
-   mobile machinery in accordance with prEN 1009-6.
This document gives the common safety requirements for mechanical processing machines used for quarrying, recycling and processing mineral and by-products (cement, lime and gypsum, sand and gravel, industrial minerals, metalliferous ore, production and demolition waste, slag handling, hard and soft rock aggregates, coal) in construction and surface mining and is intended to be used in conjunction with one of the parts EN 1009-2 to prEN 1009-6. These machine specific parts (EN 1009-2 to prEN 1009-6) do not repeat the requirements from this document, but add or replace the requirements for the machine type in question.
NOTE 1   The requirements specified in this part of EN 1009 are common to two or more types of machines for the mechanical processing of minerals and similar solid materials.
Specific requirements in EN 1009 2 to prEN 1009-6 take precedence over the respective requirements of this document.
This document also covers assemblies of two or more of the mentioned machines which function as an integrated whole. The machines included in the scope of this document can be fixed, semi-mobile or mobile.
NOTE 2   prEN 1009-6 "Specific requirements for mobile and semi mobile equipment" is under preparation to cover specific requirements (e.g. mobility, braking, access, frequent transportation), including exceptions and additional requirements for mobile and semi mobile equipment. This means that mobile machines are not covered as long as EN 1009-6 is not published by CEN.
This document covers transportation, erection, commissioning, use and maintenance of single machines or combination of single machines.
This document deals with significant hazards, common to the types of machines listed in this scope when they are used as intended and under conditions for misuse which are reasonably foreseeable by the manufacturer (see Annex F) and to the hazards due to the combination of these machines and specifies the appropriate measures to eliminate or reduce the risks arising from the significant hazards.
Design relating to road traffic regulations is not covered by this document.
This document does not cover:
-   design relating to road traffic regulations;
-   hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility;
-   specific hazards related to mobile machinery.
NOTE 3   EN ISO 13766-1 and EN ISO 13766-2 specify test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kinds of mobile construction machinery.
This document is not applicable to machinery which are manufactured before the date of publication of this document by CEN.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1009-2:2020(Main)
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 2: Specific requirements for feeding machinery and continuous handling equipment
SIST EN 1009-2:2020

This document, to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of feeding machinery and continuous handling equipment for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the specific information (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN 1009-1:2020, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1:2020 for machines that have been designed and built according to the provisions of this document.
This document, together with EN 1009-1:2020, deals with all the significant hazards, hazardous situations and events relevant to feeding machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Annex C).
This document does not cover:
-   design relating to road traffic regulations;
-   hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility;
-   specific hazards related to mobile machinery.
NOTE 1   EN ISO 13766-1 and EN ISO 13766-2 specify test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kinds of mobile construction machinery.
NOTE 2   prEN 1009-6 "Specific requirements for mobile and semi mobile equipment" is under preparation to cover specific requirements (e.g. mobility, braking, access, frequent transportation), including exceptions and additional requirements for mobile and semi mobile equipment. This means that mobile machines are not covered as long as EN 1009-6 is not published by CEN.
This document is not applicable to feeding machinery and continuous handling equipment which are manufactured before the date of publication of this document by CEN.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1009-5:2020(Main)
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 5: Specific requirements for cleaning, recycling, sorting and mud treatment machinery
SIST EN 1009-5:2020

This document, to be used together with EN 1009-1, specifies the safety requirements and their verification for the design and construction of machinery for cleaning, water recycling, mud treatment and sorting (other than screens) for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1:2020, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1:2020 for machines that have been designed and built according to the provisions of this part of EN 1009.
This document, together with EN 1009-1:2020, deals with all the significant hazards, hazardous situations and events relevant to machinery for cleaning, recycling, mud treatment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole lifetime of the machine (see Annex C).
This document does not cover:
-   design relating to road traffic regulations;
-   hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility;
-   specific hazards related to mobile machinery.
NOTE 1   EN ISO 13766-1 and EN ISO 13766-2 specify test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kinds of mobile construction machinery.
NOTE 2   prEN 1009-6 "Specific requirements for mobile and semi mobile equipment" is under preparation to cover specific requirements (e.g. mobility, braking, access, frequent transportation), including exceptions and additional requirements for mobile and semi mobile equipment. This means that mobile machines are not covered as long as EN 1009-6 is not published by CEN.
This document is not applicable to machinery for cleaning, recycling, mud treatment and sorting which are manufactured before the date of publication of this document by CEN.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1009-4:2020(Main)
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 4: Specific requirements for screening machinery
SIST EN 1009-4:2020

This document, to be used together with EN 1009-1:2020, specifies the safety requirements and their verification for the design and construction of screening machinery for the mechanical processing in quarrying, recycling and processing mineral and by-products as defined in 3.1.
In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN 1009-1:2020, the requirements of this document take precedence over the requirements of EN 1009-1:2020 for machines that have been designed and built according to the provisions of this document.
This document, together with EN 1009-1:2020, deals with all the significant hazards, hazardous situations and events relevant to screening machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Annex C).
This document does not cover:
-   design relating to road traffic regulations;
-   hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility;
-   specific hazards related to mobile machinery.
NOTE 1   EN ISO 13766-1 and EN ISO 13766-2 specify test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kinds of mobile construction machinery.
NOTE 2   prEN 1009-6 "Specific requirements for mobile and semi mobile equipment" is under preparation to cover specific requirements (e.g. mobility, braking, access, frequent transportation), including exceptions and additional requirements for mobile and semi mobile equipment. This means that mobile machines are not covered as long as EN 1009-6 is not published by CEN.
This document is not applicable to screening machinery which are manufactured before the date of publication of this document by CEN.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1009-3:2020(Main)
Machines for mechanical processing of minerals and similar solid materials - Safety - Part 3: Specific requirements for crushing and milling machinery
SIST EN 1009-3:2020

This document, to be used together with EN 1009-1:2020, specifies the safety requirements and their verification for the design and construction of crushing and milling machinery for the mechanical processing in quarrying, recycling and processing mineral and by-products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this part of EN 1009 are different from those which are stated in EN 1009-1:2020, the requirements of this part of EN 1009 take precedence over the requirements of EN 1009-1:2020 for machines that have been designed and built according to the provisions of this part of EN 1009.
This document, together with EN 1009-1:2020, deals with all the significant hazards, hazardous situations and events relevant to crushing and milling machinery when they are used as intended and under the conditions foreseen by the manufacturer (see Annex C).
This document does not cover:
-   design relating to road traffic regulations;
-   hazards arising from the use of the machines in potentially explosive atmospheres as well as from processing of explosive materials and risks related to electromagnetic compatibility;
-   specific hazards related to mobile machinery.
NOTE 1   EN ISO 13766-1 and EN ISO 13766-2 specify test methods and acceptance criteria for evaluating the electromagnetic compatibility of all kinds of mobile construction machinery.
NOTE 2   prEN 1009-6 "Specific requirements for mobile and semi mobile equipment' is under preparation to cover specific requirements (e.g. mobility, braking, access, frequent transportation), including exceptions and additional requirements for mobile and semi mobile equipment. This means that mobile machines are not covered as long as EN 1009-6 is not published by CEN.
This document is not applicable to crushing and milling machinery which are manufactured before the date of publication of this document by CEN.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15572:2015(Main)
Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines
SIST EN 15572:2015

This European Standard applies to table edge finishing machines (see 3.1) and belt edge finishing machines (see 3.2) which are used to grind, polish, cut and shape the edge or surface of slabs, strips or tiles of natural stone and engineered stone (e.g. agglomerated stone) as defined by EN 14618:2009.
This European Standard deals with all significant hazards, hazardous situations and events relevant to edge finishing machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard deals all significant hazards that may occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This European Standard also applies to machines fitted with the following facilities/devices:
-   automatic tool change;
-   tilting and/or rotating head axis;
-   rotating workpiece support(s);
-   axes operating according a NC work programme;
-   mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
and the following accessory units:
-   spindle with grinding and polishing tool;
-   spindle with bush-hammering tool;
-   spindle with diamond wheel;
-   spindle with calibrating tool;
-   spindle with dripstone tool;
-   spindle with cutting tool;
-   spindle with shaping tool.
This European Standard does not deal with:
-   hand-held grinding machines;
-   machines intended for operation in a potentially explosive atmosphere;
-   operation in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
-   machines intended for outdoor operation.
This European Standard is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day