Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) (ISO 1833-24:2010)

ISO 1833-24:2010 specifies a method using phenol and tetrachloroethane to determine the percentage of polyester after removal of non-fibrous matter, in textiles made of binary mixtures of certain polyester fibres with acrylic, polypropylene or aramid fibres.
This method is not applicable to coated fabrics.

Textilien - Quantitative chemische Analysen - Teil 24: Mischungen aus Polyester und bestimmten anderen Fasern (Phenol-/Tetrachlorethan-Verfahren) (ISO 1833-24:2010)

In diesem Teil der ISO 1833 wird ein Verfahren mit Phenol und Tetrachlorethan zur Bestimmung des prozentualen Anteils an Polyester, nach dem Abtrennen der nichtfaserigen Begleitstoffe, in Textilien aus binären Mischungen bestimmter Polyesterfasern mit Acryl-, Polypropylen- oder Aramidfasern festgelegt. Dieses Verfahren gilt nicht für beschichtete Flächengebilde.

Textiles - Analyse chimique quantitative - Partie 24: Mélanges de polyester et de certaines autres fibres (méthode au phénol et au tétrachloréthane) (ISO 1833-24:2010)

L'ISO 1833-24:2010 spécifie une méthode utilisant du phénol et du tétrachloroéthane pour la détermination du pourcentage de polyester, après extraction des matières non fibreuses, dans les textiles constitués de mélanges binaires de fibres polyester avec fibres acryliques, polypropylène ou aramide.
La méthode ne s'applique pas aux tissus enduits.

Tekstilije - Kvantitativna kemična analiza - 24. del: Mešanice poliestra in nekaterih drugih vlaken (metoda z uporabo fenola in tetrakloretana) (ISO 1833-24:2010)

Ta del ISO 1833 določa metodo, ki uporablja fenol in tetrakloroetan za ugotavljanje odstotka poliestra po odstranitvi nevlaknatih snovi v tekstilijah, izdelanih iz binarnih mešanic določenih poliestrskih vlaken z akrilnimi, polipropilenskimi ali aramidnimi vlakni. Ta metoda na velja za plastificirane tekstilije.

General Information

Status
Published
Publication Date
08-Feb-2011
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
09-Feb-2011
Completion Date
09-Feb-2011

Buy Standard

Standard
EN ISO 1833-24:2012
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
FprEN ISO 1833-24:2010
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 1833-24:2012
01-januar-2012

7HNVWLOLMH.YDQWLWDWLYQDNHPLþQDDQDOL]DGHO0HãDQLFHSROLHVWUDLQQHNDWHULK

GUXJLKYODNHQ PHWRGD]XSRUDERIHQRODLQWHWUDNORUHWDQD  ,62

Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and certain

other fibres (method using phenol and tetrachloroethane) (ISO 1833-24:2010)

Textilien - Quantitative chemische Analyse - Teil 24: Mischungen aus Polyester und

bestimmten anderen Fasern (Phenol-/Tetrachlorethan-Verfahren) (ISO 1833-24:2010)

Textiles - Analyse chimique quantitative - Partie 24: Mélanges de polyester et de

certaines autres fibres (méthode au phénol et au tétrachloréthane) (ISO 1833-24:2010)

Ta slovenski standard je istoveten z: EN ISO 1833-24:2011
ICS:
59.060.20 Umetna vlakna Man-made fibres
SIST EN ISO 1833-24:2012 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 1833-24:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 1833-24:2012
EUROPEAN STANDARD
EN ISO 1833-24
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2011
ICS 59.060.01
English Version
Textiles - Quantitative chemical analysis - Part 24: Mixtures of
polyester and certain other fibres (method using phenol and
tetrachloroethane) (ISO 1833-24:2010)

Textiles - Analyse chimique quantitative - Partie 24: Textilien - Quantitative chemische Analysen - Teil 24:

Mélanges de polyester et de certaines autres fibres Mischungen aus Polyester und bestimmten anderen

(méthode au phénol et au tétrachloréthane) (ISO 1833- Fasern (Phenol-/Tetrachlorethan-Verfahren) (ISO 1833-

24:2010) 24:2010)
This European Standard was approved by CEN on 2 January 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1833-24:2011: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1833-24:2012
EN ISO 1833-24:2011 (E)
Contents Page

Foreword ..............................................................................................................................................................3

---------------------- Page: 4 ----------------------
SIST EN ISO 1833-24:2012
EN ISO 1833-24:2011 (E)
Foreword

The text of ISO 1833-24:2010 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the

International Organization for Standardization (ISO) and has been taken over as EN ISO 1833-24:2011 by

Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by August 2011, and conflicting national standards shall be withdrawn at

the latest by August 2011.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,

Sweden, Switzerland and the United Kingdom.
Endorsement notice

The text of ISO 1833-24:2010 has been approved by CEN as a EN ISO 1833-24:2011 without any

modification.
---------------------- Page: 5 ----------------------
SIST EN ISO 1833-24:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 1833-24:2012
INTERNATIONAL ISO
STANDARD 1833-24
First edition
2010-05-01
Textiles — Quantitative chemical
analysis —
Part 24:
Mixtures of polyester and certain other
fibres (method using phenol and
tetrachloroethane)
Textiles — Analyse chimique quantitative —
Partie 24: Mélanges de polyester et de certaines autres fibres (méthode
au phénol et au tétrachloréthane)
Reference number
ISO 1833-24:2010(E)
ISO 2010
---------------------- Page: 7 ----------------------
SIST EN ISO 1833-24:2012
ISO 1833-24:2010(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

COPYRIGHT PROTECTED DOCUMENT
© ISO 2010

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 1833-24:2012
ISO 1833-24:2010(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Textilien - Quantitative chemische Analyse - Teil 24: Mischungen aus Polyester und bestimmten anderen Fasern (Phenol-/Tetrachlorethan-Verfahren) (ISO 1833-24:2010)Textiles - Analyse chimique quantitative - Partie 24: Mélanges de polyester et de certaines autres fibres (méthode au phénol et au tétrachloréthane) (ISO 1833-24:2010)Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) (ISO 1833-24:2010)59.060.20Umetna vlaknaMan-made fibresICS:Ta slovenski standard je istoveten z:FprEN ISO 1833-24kSIST FprEN ISO 1833-24:2010en,fr,de01-september-2010kSIST FprEN ISO 1833-24:2010SLOVENSKI

STANDARD
kSIST FprEN ISO 1833-24:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN ISO 1833-24
July 2010 ICS 59.060.20 English Version

Textiles - Quantitative chemical analysis - Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) (ISO 1833-24:2010)

Textiles - Analyse chimique quantitative - Partie 24: Mélanges de polyester et de certaines autres fibres (méthode au phénol et au tétrachloréthane) (ISO 1833-24:2010)

Textilien - Quantitative chemische Analyse - Teil 24: Mischungen aus Polyester und bestimmten anderen Fasern (Phenol-/Tetrachlorethan-Verfahren) (ISO 1833-24:2010) This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 248.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN ISO 1833-24:2010: EkSIST FprEN ISO 1833-24:2010

FprEN ISO 1833-24:2010 (E) 2 Contents Page Foreword ..............................................................................................................................................................3 kSIST FprEN ISO 1833-24:2010

FprEN ISO 1833-24:2010 (E) 3 Foreword The text of ISO 1833-24:2010 has been prepared by Technical Committee ISO/TC 38 “Textiles” of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO 1833-24:2010 by Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of which is held by BSI. This document is currently submitted to the Unique Acceptance Procedure. Endorsement notice The text of ISO 1833-24:2010 has been approved by CEN as a FprEN ISO 1833-24:2010 without any modification.

kSIST FprEN ISO 1833-24:2010
kSIST FprEN ISO 1833-24:2010
Reference numberISO 1833-24:2010(E)© ISO 2010

INTERNATIONAL STANDARD ISO1833-24First edition2010-05-01Textiles — Quantitative chemical analysis — Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) Textiles — Analyse chimique quantitative — Partie 24: Mélanges de polyester et de certaines autres fibres (méthode au phénol et au tétrachloréthane)

kSIST FprEN ISO 1833-24:2010

ISO 1833-24:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

COPYRIGHT PROTECTED DOCUMENT

ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.

+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2010 – All rights reserved
kSIST FprEN ISO 1833-24:2010

ISO 1833-24:2010(E) © ISO 2010 – All rights reserved iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Stan

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.