EN 12371:2010
(Main)Natural stone test methods - Determination of frost resistance
Natural stone test methods - Determination of frost resistance
This European Standard specifies a method to assess the effect of freeze/thaw cycles on natural stones (see EN 12670 for terminology, and EN 12440 for denomination). The standard contains provision for both a shorter technological test (Test A) to assess the effect of freeze/thaw cycles on the relevant performance characteristics and an identification test (Test B).
NOTE Some marbles, as defined in EN 12440, undergo changes in physical properties as a result of the test conditions rather than the freeze/thaw cycles. In these cases, additional tests (for example EN 14066) should be applied.
Prüfverfahren für Naturstein - Bestimmung des Frostwiderstandes
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Wirkung von Frost Tau Wechseln auf Natur-steine fest (siehe EN 12670 für die Terminologie und EN 12440 für die Bezeichnung). Die Norm enthält Verfahren sowohl für eine kürzere technologische Prüfung (Prüfung A) zur Bestimmung der Wirkung von Frost Tau Wechseln auf die relevanten Leistungsdaten als auch für eine Identifizierungsprüfung (Prüfung B).
ANMERKUNG Einige Marmore, wie in EN 12440 festgelegt, unterliegen Änderungen in den physikalischen Eigenschaften eher aufgrund der Prüfungsbedingungen als aufgrund der Frost Tau Wechsel. In diesen Fällen sollten zusätzliche Prüfungen (z. B. EN 14066) durchgeführt werden.
Méthodes d’essai pour pierres naturelles - Détermination de la résistance au gel
La présente Norme européenne spécifie une méthode d’évaluation de l’effet des cycles de gel/dégel sur les pierres naturelles (voir l’EN 12670 pour la terminologie et l’EN 12440 pour la dénomination). La présente Norme contient des dispositions concernant à la fois un essai technologique plus court (Essai A) permettant d’évaluer l’effet des cycles de gel/dégel sur les caractéristiques de performances appropriées et un essai d’identification (Essai B).
NOTE Certains marbres, tels que définis dans l’EN 12440, subissent des changements de leurs propriétés physiques résultant davantage d’autres conditions climatiques que seulement des cycles de gel/dégel. Dans ce cas, il convient d’effectuer des essais supplémentaires (par exemple, l’EN 14066).
Preskušanje naravnega kamna - Ugotavljanje odpornosti proti zmrzovanju
Ta evropski standard opredeljuje metodo za ocenjevanje učinkov ciklusov zmrzovanja in odtaljevanja na naravni kamen (glej EN 12670 za terminologijo, in EN 12440 za denominacijo). Standard vsebuje določbe tako za krajši tehnološki preskus (Preskus A) za ocenjevanje učinka ciklusov zmrzovanja in odtaljevanja na pomembne lastnosti delovanja ter identifikacijski preskus (Preskus B).
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskušanje naravnega kamna - Ugotavljanje odpornosti proti zmrzovanjuPrüfverfahren für Naturstein - Bestimmung des FrostwiderstandesMéthodes d'essai des pierres naturelles - Détermination de la résistance au gelNatural stone test methods - Determination of frost resistance91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 12371:2010SIST EN 12371:2010en,fr,de01-september-2010SIST EN 12371:2010SLOVENSKI
STANDARDSIST EN 12371:20021DGRPHãþD
SIST EN 12371:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12371
March 2010 ICS 73.020; 91.100.15 Supersedes EN 12371:2001English Version
Natural stone test methods - Determination of frost resistance
Méthodes d'essai pour pierres naturelles - Détermination de la résistance au gel
Prüfverfahren für Naturstein - Bestimmung des Frostwiderstandes This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12371:2010: ESIST EN 12371:2010
EN 12371:2010 (E) 2 Contents Page Foreword .31 Scope .52 Normative references .53 Principle .54 Symbols .55 Apparatus .66 Preparation of the specimens .66.1 Sampling .66.2 Size of specimens .76.2.1 Technological test (Test A) .76.2.2 Identification test (Test B) .76.2.3 Putting reference marks on the specimens .76.3 Monitoring core temperature .76.4 Drying the specimens .86.5 Immersion of the specimens .86.6 Determination of the apparent volume .86.7 Number of cycles .86.7.1 Technological test (Test A) .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.