Textiles and textile products - Part 3: Safety of children's clothing - Security of attachment of metal mechanically applied press fasteners - Test method

This document defines a test method for security of attachment of functional and decorative metal mechanically applied press fasteners to children's clothing including for example gloves, hats, scarves, hosiery, ties, and textile belts.
IMPORTANT: Eyelets and rivets cannot be tested by this method as the integrity of the component when attached to textile fabrics is destroyed in the gripping action. Eyelets and rivets are assessed as described in CEN/TS 17394 4:2021.
This document does not apply to:
a)   child care articles;
b)   shoes, boots and similar footwear;
c)   toys (see NOTE 2);
d)   other articles sold with clothing.
NOTE 1   The above items are covered by other CEN Technical Committees and as such are out of the scope of this document.
NOTE 2   Disguise costumes including carnival costumes are examples of clothing which are also toys and fall within the scope of the Toy Safety Directive.
The scope of this document is limited to metal mechanically applied components. Work is in progress to develop standards for other garment components.
- EN 17394 2:2020, Textiles and textile products - Part 2: Safety of children's clothing - Security of attachment of buttons - Test method
- CEN/TS 17394 4:2021, Textiles and textile products - Part 4: Safety of children's clothing - Security of attachment of components except buttons and metal mechanically applied press fasteners - Test method
Performance requirements are provided in CEN/TS 17394 1:2021.

Textilien und textile Produkte - Teil 3: Sicherheit von Kinderbekleidung - Sicherheit der Befestigung von mechanisch befestigten Druckknöpfen - Prüfverfahren

Dieses Dokument legt ein Prüfverfahren für die Sicherheit der Befestigung von funktionellen und dekorativen mechanisch angebrachten Metalldruckverschlüssen an Kinderbekleidung fest, einschließlich z. B. Handschuhen, Mützen und Hüten, Schals, Strümpfen, Krawatten und Stoffgürteln.
WICHTIG — Ösen und Nieten können mit diesem Verfahren nicht geprüft werden, da die Komponente, wenn sie an textilem Material befestigt ist, durch den Klemm¬vorgang zerstört wird. Ösen und Nieten werden nach CEN/TS 17394 4:2021 bewertet.
Dieses Dokument gilt nicht für:
a)   Artikel für die Kinderpflege;
b)   Schuhe, Stiefel und ähnliche Fußbekleidung;
c)   Spielzeuge (siehe Anmerkung 2);
d)   sonstige mit Bekleidung verkaufte Artikel.
ANMERKUNG 1   Die vorstehenden Artikel werden durch andere Technische Komitees des CEN erfasst und fallen daher nicht in den Anwendungsbereich dieses Dokumentes.
ANMERKUNG 2   Verkleidungskostüme einschließlich Faschingskostümen sind Beispiele für Bekleidung, die auch Spiel¬zeug sind und in den Anwendungsbereich der Richtlinie über die Sicherheit von Spielzeug fallen.
Der Anwendungsbereich dieses Dokuments ist auf mechanisch angebrachte metallische Komponenten beschränkt. Derzeit werden Normen für weitere Komponenten von Kleidungsstücken erarbeitet.
—   EN 17394 2:2020, Textilien und textile Erzeugnisse — Teil 2: Sicherheit von Kinderbekleidung — Sicherheit der Befestigung von Knöpfen — Prüfverfahren
—   CEN/TS 17394 4:2021, Textilien und textile Erzeugnisse — Teil 4: Sicherheit von Kinderbekleidung — Sicherheit der Befestigung von Komponenten außer Knöpfen und mechanisch befestigten Verschlüssen — Prüfverfahren
Leistungsanforderungen sind in CEN/TS 17394 1:2021 enthalten.

Textiles et produits textiles - Partie 3 : Sécurité des vêtements d’enfants - Sécurité d’attache des boutons-pression métalliques appliqués mécaniquement - Méthode d’essai

Le présent document définit une méthode d’essai pour la sécurité d’attache des boutons-pression métalliques appliqués mécaniquement, fonctionnels et décoratifs, utilisés pour les vêtements d’enfants y compris, par exemple, les gants, les chapeaux, les écharpes, les articles de bonneterie, les cravates et les ceintures en textile.
IMPORTANT : Les oeillets et les rivets ne peuvent pas être soumis à l’essai au moyen de la présente méthode, car l’intégrité du composant, lorsqu’il est fixé au support textile, est gravement compromise lors de la préhension. Les oeillets et les rivets sont évalués tel que décrit dans le CEN/TS 17394 4:2021.
Le présent document ne s’applique pas aux :
a)   articles de puériculture ;
b)   chaussures, bottes et articles similaires ;
c)   jouets (voir NOTE 2) ;
d)   autres articles vendus avec le vêtement.
NOTE 1   Les articles ci-dessus sont couverts par d’autres Comités techniques CEN et n’entrent par conséquent pas dans le domaine d’application du présent document.
NOTE 2   Les déguisements y compris les costumes de carnaval sont des exemples de vêtements qui sont également des jouets et qui entrent dans le domaine d’application de la Directive relative à la sécurité des jouets.
Le domaine d’application du présent document se limite aux composants métalliques appliqués mécaniquement. Des travaux sont en cours dans le but d’élaborer des normes relatives à d’autres composants de vêtements :
-   EN 17394 2:2020, Textiles et produits textiles - Partie 2 : Sécurité des vêtements d’enfants - Sécurité d’attache des boutons - Méthode d’essai ;
-   CEN/TS 17394 4:2021, Textiles et produits textiles - Partie 4 : Sécurité des vêtements d’enfants - Sécurité d’attache des composants à l’exception des boutons et des boutons-pression métalliques appliqués mécaniquement - Méthode d’essai.
Des exigences relatives à la performance sont fournies dans le CEN/TS 17394 1:2021.

Tekstilije in tekstilni izdelki - 3. del: Varnost otroških oblačil - Varnost pritrditve mehansko pritrjenih kovinskih pritiskačev - Preskusna metoda

General Information

Status
Published
Publication Date
12-Jan-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
13-Jan-2021
Due Date
03-Apr-2020
Completion Date
13-Jan-2021

Buy Standard

Technical specification
TS CEN/TS 17394-3:2024
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
kTS FprCEN/TS 17394-3:2019
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 17394-3:2024
01-maj-2024
Tekstilije in tekstilni izdelki - 3. del: Varnost otroških oblačil - Varnost pritrditve
mehansko pritrjenih kovinskih pritiskačev - Preskusna metoda
Textiles and textile products - Part 3: Safety of children's clothing - Security of
attachment of metal mechanically applied press fasteners - Test method
Textilien und textile Produkte - Teil 3: Sicherheit von Kinderbekleidung - Sicherheit der
Befestigung von mechanisch befestigten Druckknöpfen - Prüfverfahren
Textiles et produits textiles - Partie 3 : Sécurité des vêtements d’enfants - Sécurité
d’attache des boutons-pression métalliques appliqués mécaniquement - Méthode d’essai
Ta slovenski standard je istoveten z: CEN/TS 17394-3:2021
ICS:
61.020 Oblačila Clothes
97.190 Otroška oprema Equipment for children
SIST-TS CEN/TS 17394-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17394-3:2024

---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17394-3:2024


CEN/TS 17394-3
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

January 2021
TECHNISCHE SPEZIFIKATION
ICS 61.020; 97.190
English Version

Textiles and textile products - Part 3: Safety of children's
clothing - Security of attachment of metal mechanically
applied press fasteners - Test method
Textiles et produits textiles - Partie 3 : Sécurité des Textilien und textile Produkte - Teil 3: Sicherheit von
vêtements d'enfants - Sécurité d'attache des boutons- Kinderbekleidung - Sicherheit der Befestigung von
pression métalliques appliqués mécaniquement - mechanisch befestigten Druckknöpfen - Prüfverfahren
Méthode d'essai
This Technical Specification (CEN/TS) was approved by CEN on 13 December 2020 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17394-3:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17394-3:2024
CEN/TS 17394-3:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Sampling and selection of test specimens . 7
5 Procedure. 7
5.1 General . 7
5.2 Principle . 8
5.3 Apparatus .
...

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17394-3:2019
01-september-2019
Tekstilije in tekstilni izdelki - 3. del: Varnost otroških oblačil - Varnost pritrditve
mehansko pritrjenih kovinskih pritiskačev - Preskusna metoda
Textiles and textile products - Part 3: Safety of children's clothing - Security of
attachment of metal mechanically applied press fasteners - Test method
Textilien und textile Produkte - Sicherheit von Kinderbekleidung - Teil 3: Sicherheit der
Befestigung von mechanisch befestigten Druckknöpfen - Prüfverfahren
Textiles et produits textiles - Partie 3 : Sécurité des vêtements d’enfants - Sécurité
d’attache des boutons-pression métalliques appliqués mécaniquement - Méthode d’essai
Ta slovenski standard je istoveten z: FprCEN/TS 17394-3
ICS:
61.020 Oblačila Clothes
97.190 Otroška oprema Equipment for children
kSIST-TS FprCEN/TS 17394-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

kSIST-TS FprCEN/TS 17394-3:2019

---------------------- Page: 2 ----------------------

kSIST-TS FprCEN/TS 17394-3:2019


FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17394-3
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

July 2019
ICS
English Version

Textiles and textile products - Part 3: Safety of children's
clothing - Security of attachment of metal mechanically
applied press fasteners - Test method
Textiles et produits textiles - Partie 3 : Sécurité des Textilien und textile Produkte - Sicherheit von
vêtements d'enfants - Sécurité d'attache des boutons- Kinderbekleidung - Teil 3: Sicherheit der Befestigung
pression métalliques appliqués mécaniquement - von mechanisch befestigten Druckknöpfen -
Méthode d'essai Prüfverfahren


This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 248.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17394-3:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

kSIST-TS FprCEN/TS 17394-3:2019
FprCEN/TS 17394-3:2019 (E)
Contents Page

European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Sampling and selection of test specimens . 7
5 Procedure. 7
5.1 General . 7
5.2 Principle . 7
5.3 Apparatus . 7
5.3.1 Constant rate of extension (CRE) tensile-testing machine. .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.