iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1053:1995

(Main)

Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness

Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness

This Standard specifies a test method for watertightness of a) joints of thermoplastics piping systems for non-pressure applications; b) thermoplastics fabricated products made from more than one piece for non-pressure applications.

Kunststoff-Rohrleitungssysteme - Rohrleitungssysteme aus Thermoplasten für drucklose Anwendungen - Prüfverfahren auf die Wasserdichtheit

Diese Norm legt ein Prüfverfahren für die Wasserdichtheit fest a) von Verbindungen in thermoplastischen Rohrleitungssystemen für drucklose Anwendungen; b) von handgefertigten Produkten, die aus mehr als einem Teil hergestellt sind, für drucklose Anwendungen.

Systèmes de canalisations en plastiques - Systèmes de canalisations thermoplastiques pour applications sans pression - Méthode d'essai de l'étanchéité à l'eau

Cette norme spécifie une méthode d'essai concernant l'étanchéité à l'eau a) des assemblages des sytèmes de canalisations thermoplastiques pour des applications sans pression; b) des produits thermoplastiques fabriqués avec plus d'une pièce, pour des applications sans pression.

Cevni sistemi iz polimernih materialov - Plastomerni cevni sistemi, ki delujejo po težnostnem principu - Metoda za preskus vodotesnosti

General Information

Status
Withdrawn
Publication Date
24-Oct-1995
Withdrawal Date
17-Oct-2017
ICS
23.040.05 - Pipeline and its parts for external sewage systems
23.040.20 - Plastics pipes
Technical Committee
CEN/TC 155 - Plastics piping systems and ducting systems
Drafting Committee
CEN/TC 155 - Plastics piping systems and ducting systems
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-Oct-2017
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 1053:1997 - Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness

Relations

Replaced By
EN ISO 13254:2017 - Thermoplastics piping systems for non-pressure applications - Test method for watertightness (ISO 13254:2010)
Effective Date
25-Oct-2017

Buy Standard

EN 1053:1997EN 1053:1997
PreviousNext
Standard
EN 1053:1997
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni sistemi iz polimernih materialov - Plastomerni cevni sistemi, ki delujejo po težnostnem principu - Metoda za preskus vodotesnostiKunststoff-Rohrleitungssysteme - Rohrleitungssysteme aus Thermoplasten für drucklose Anwendungen - Prüfverfahren auf die WasserdichtheitSystemes de canalisations en plastiques - Systemes de canalisations thermoplastiques pour applications sans p
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TS 1046:2021(Main)
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation
SIST-TS CEN/TS 1046:2021

This document gives the recommended practise for underground open trench installation and commissioning of thermoplastics piping systems to be used for the conveyance of water under pressure (in addition to EN 805) and for the discharge of wastewater under gravity (in addition to EN 1610) .
In the field of non-pressure underground drainage and sewerage this is reflected in the marking of products by application code "U" and "UD":
-   outside the building structure (U);
-   both buried in ground within the building structure (application area code "D") and outside the
building (application area code "UD").
This document covers also installation and/or connections to valves, manholes, inspection chambers, gullies and other ancillary components in piping systems.
NOTE 1   Code of practise for pipelines for gas supply is covered by EN 12007-series [21].
NOTE 2   Recommended practices for installation of plastic piping systems for soil and waste discharge within the building structure is covered by CEN/TR 13801 [12].
NOTE 3   Practices for underground installation of rainwater infiltration and storage attenuation systems are covered by CEN/TR 17179 [13].
NOTE 4   It is assumed that additional recommendations and/or requirements are detailed in the individual product standards.
NOTE 5    If non-plastic components are part of the plastic system the manufacturer's instructions should be taken into account.
Requirements and instructions concerning commissioning of systems can be found in EN 805 and EN 1610 and the relevant national and/or local regulations. This document gives specific additional recommendations for commissioning relevant for plastic piping systems.
Attention is drawn to any relevant local and/or national regulations (e.g. health, safety and hygienic requirements).

  • Technical specification
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13598-2:2020(Main)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers
SIST EN 13598-2:2020

This document specifies the definitions and requirements for unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) manholes and inspection chambers intended for non-pressure underground drainage and sewerage systems up to a maximum depth of 6 m from ground level to the invert of the manhole or inspection chamber.
This document covers manholes and inspection chambers, with bases having a flow channel, and their joints to the piping system.
Manholes and inspection chambers are intended to be used in pedestrian or vehicular traffic areas outside the building structure.
NOTE 1   The intended use in underground installation outside the building structure is reflected in the marking of products by the application area code "U".
NOTE 2   Products complying with this document can also be used in non-traffic areas.
NOTE 3   Products complying with this standard can be installed in underground applications without additional static calculation.
NOTE 4   Shallow chambers are specified in EN 13598-1 [1].
Manholes and inspection chambers complying with EN 13598-2 are made from a prescribed set of components that are manufactured from unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifier (PP-MD) or polyethylene (PE) and assembled together.
NOTE 5   The complete manhole or inspection chamber assembly can also include items which are not covered by this document (for example near surface or surface components).
NOTE 6   Manholes and inspection chambers can be supplied with covers, frame covers and gratings complying with the relevant part of EN 124 [2].
Manholes and inspection chambers complying with EN 13598-2 may be used for storm-water systems.
Manhole and inspection chamber components can be manufactured by various methods e.g. extrusion, injection moulding, rotational moulding, low-pressure moulding or fabricated.
NOTE 7   Manholes and inspection chambers can be site assembled from different components, but can also be manufactured as a single unit.
NOTE 8   Manholes and inspection chambers can be subject to national regulations and / or local provisions.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13598-1:2020(Main)
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings and shallow chambers
SIST EN 13598-1:2020

This document specifies the definitions and requirements for ancillary fittings and shallow chambers installed underground in non-pressure drainage and sewerage systems and manufactured from unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifier (PP-MD) or polyethylene (PE) intended for use for:
-   non-pressure underground drainage and sewerage outside the building structure (application area code "U", and
-   non-pressure underground drainage and sewerage for both buried in ground within the building structure (application area code "D" and outside the building structure.
This is reflected in the marking of products by "U" and "UD".
It also covers the jointing of the ancillary fittings and shallow chambers to the pipework system.
The ancillary fittings covered by this standard are the following:
-   sealed access fittings;
-   rodding point covers;
-   rodding tees;
-   mechanical saddles.
Ancillary fittings according to this document are intended for use in pedestrian areas, except rodding tees and mechanical saddles which can also be used in vehicular trafficked areas.
NOTE 1   Pedestrian areas are as defined in EN 124 1.
Ancillary fittings can be installed to a maximum depth of 6,0 m from ground level, with the exception of rodding point covers.
Shallow chambers according to this document are intended for use in private drains located in pedestrian areas above the ground water table, to a maximum depth of 2,0 m from ground level to the invert of the main channel. This document covers shallow chambers with flow profile bases, and their joints to the piping system.
NOTE 2   Manholes and inspection chambers are specified in FprEN 13598-2 [1].
Ancillary fittings and shallow chambers complying with this document also comply with the general requirements given in EN 476.
Ancillary fittings and shallow chambers can be manufactured by various methods e.g. injection moulding, rotational moulding, spiral winding or fabricated from components made to other standards.
NOTE 3   Products complying with this document can be used with pipes, fittings and other components conforming to any of the plastics products standards listed in Clause 2, providing their dimensions are compatible.
NOTE 4   Products complying with this document can be installed in underground applications without additional static calculation.
NOTE 5   Ancillary fittings and shallow chambers can be subject to national safety regulations and / or local provisions.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11297-2:2018(Main)
Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018)
SIST EN ISO 11297-2:2018

ISO 11297-2:2018, in conjunction with ISO 11297‑1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground drainage and sewerage networks under pressure. It is applicable to polyethylene (PE) pipes of three different types:
-      PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes;
-      PE pipes with co-extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating;
-      PE coated pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe ("coated pipe"), see Annex A.
In addition, ISO 11297-2:2018 covers:
-      jointing of pipe lengths by means of butt fusion;
-      fabricated and injection-moulded fittings made of PE.
ISO 11297-2:2018 is applicable to PE pipes, fittings and assemblies intended to be used at an operating temperature of 20 °C as the reference temperature.
NOTE       For applications operating at constant temperatures greater than 20 °C and up to 40 °C, see ISO 4427‑1:2007, Annex A.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11296-2:2018(Main)
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018)
SIST EN ISO 11296-2:2018

ISO 11296-2:2018, in conjunction with ISO 11296-1, specifies requirements and test methods for pipes and fittings which are part of plastics piping systems installed as continuous pipes in the renovation of underground non-pressure drainage and sewerage networks. It is applicable to polyethylene (PE) pipes of three different types:
-      PE solid wall single layered pipes (nominal outside diameter, dn), including any identification stripes;
-      PE pipes with co-extruded layers on either or both the outside and inside of the pipe (total outside diameter, dn), as specified in Annex A, where all layers have the same MRS rating;
-      PE coated pipes (outside diameter, dn) having a peelable, contiguous, thermoplastics additional layer on the outside of the pipe ("coated pipe"), see Annex A.
In addition, ISO 11296-2:2018 covers:
-      jointing of pipe lengths by means of butt fusion;
-      fabricated and injection-moulded fittings made of PE.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17179:2018(Main)
Thermoplastics piping and ducting systems - Rainwater infiltration and storage attenuation systems - Practices for underground installation
SIST-TP CEN/TR 17179:2018

This Technical Report is applicable to the installation of rainwater infiltration and storage/attenuation systems under gravity.
This Technical Report covers installations including:
-   reservoirs made by assembled cuboid shaped thermoplastic boxes;
-   integral components;
-   ancillary components (e.g. access provisions and connections);
-   geotextiles and/or geomembranes;
-   embedment and backfill.
These systems are intended for underground use in landscape, pedestrian or vehicular traffic areas and are used outside building structures.
This Technical Report is only applicable to systems containing boxes to create a reservoir where the manufacturer has clearly stated in the installation instructions how the components should be assembled.
This Technical Report is a guidance document. It provides a set of general guidelines which gives best practice for installation.
NOTE 1   It is anticipated that additional recommendations and/or requirements (e.g. design, dimensioning and structural aspects) will be detailed in the relevant standards.
NOTE 2   Attention is drawn to the need to comply with national or local regulations.

  • Technical report
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13260:2011/A1:2017(Amendment)
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading - Amendment 1 (ISO 13260:2010/Amd 1:2017)
SIST EN ISO 13260:2011/A1:2017
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12200-1:2016(Main)
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
SIST EN 12200-1:2016

This European Standard specifies the requirements for pipes, fittings, brackets and the system of unplasticized poly(vinyl chloride) (PVC-U) intended for use as above-ground external rainwater piping systems.
It also specifies:
a)   The requirements for metallic brackets.
b)   Both solid wall pipes and fittings, (i.e. product manufactured from a single layer), as well as solid wall multi-layer pipes.
c)   The test parameters for the test methods referred to in this standard.
Pipes can be used in conjunction with fittings and brackets of acrylic materials provided these polymers meet the performance requirements of this standard.
The products are usually used in conjunction with gutters conforming to EN 607 [1]. They are not intended for use with products conforming to EN 612 [2].
This standard is applicable to PVC-U rainwater systems of circular, square, rectangular or any other shape with sealed (rubber ring or solvent cement) or unsealed joints.
This standard covers a range of pipes and fittings sizes.
NOTE 1    It is the responsibility of the purchaser or specifier to make the appropriate selections from the size range to take into account their particular requirements and any relevant national regulations and installation practices or codes.
NOTE 2   The term "rainwater" in this standard is used also to encompass "surface water" (as defined in EN 752 [6]) run-off from buildings.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 1452-7:2014(Main)
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 7: Guidance for the assessment of conformity
SIST-TS CEN/TS 1452-7:2014

This part of EN ISO 1452 gives guidance for the assessment of conformity of compounds/formulations, products, joints and assemblies in accordance with the applicable parts of EN ISO 1452 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of certification procedures.
It is recommended that the quality management system conforms to or is no less stringent than the relevant requirements to EN ISO 9001 [1].
NOTE   If certification is involved, the certification body and inspection body is preferably compliant with EN 45011 [2], EN 45012 [3] or EN ISO/IEC 17021 [4], as applicable.
In conjunction with Parts 1 to 5 of EN ISO 1452 (see Foreword) this document is applicable to unplasticized poly(vinyl chloride) (PVC-U) plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure.

  • Technical specification
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 13476-3(Main)
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
oSIST prEN 13476-3:2024

This document, together with prEN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended for use in non-pressure underground drains and sewers for foul wastewater.
NOTE 1   Products complying with this document can also be used in non-pressure underground drains and sewers for surface water.
This document is applicable to pipes and fittings with smooth internal and profiled external surfaces, designated as Type B.
This document also specifies test methods and test parameters.
This document is applicable to:
a)   structured-wall pipes and fittings, which are intended to be used buried underground outside the building structure, reflected in the marking of products by “U”; and
b)   structured-wall pipes and fittings, which are intended to be used buried underground both outside (application area code “U”) and within the building structure, reflected in the marking of products by “UD”.
This document is applicable to structured-wall pipes and fittings with or without an integral socket with elastomeric ring seal joints as well as welded and fused joints.
This document covers a range of pipe and fitting sizes, materials, pipe constructions, stiffness classes, application areas, tolerance classes and gives recommendations concerning colours.
NOTE 2   It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.

  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day