iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

CEN/TS 16931-3-4:2017

(Main)

Electronic invoicing - Part 3-4: Syntax binding for UN/EDIFACT INVOIC D16B

Electronic invoicing - Part 3-4: Syntax binding for UN/EDIFACT INVOIC D16B

This CEN Technical Specification (TS) contains the mapping between the semantic data model of an electronic invoice (EN 16931-1) and the following syntax: UN/EDIFACT INVOIC D16B. For each element in the semantic model (including sub-elements or supplementary componentts sucha as Code List identifiers) it is defined which element in the syntax is to be used to contain its information contents. Any mismatches between semantics, format, cardinality or structure are indicated. Any rules to be followed when using the specific syntax are stated informally in this TS. Together with this TS a set of validation artefacts is published, including formalisation of the rules.

Elektronische Rechnungsstellung - Teil 3-4: Umsetzung in die Syntax UN/EDIFACT INVOIC D16B

Facturation électronique - Partie 3-4 : Correspondance syntaxique pour les factures - Schéma D16B UN/EDIFACT

Elektronsko izdajanje računov - 3-4. del: Sintaksa povezav v skladu z UN/EDIFACT INVOIC D16B

Ta tehnična specifikacija CEN (TS) vsebuje preslikavo med semantičnim podatkovnim modelom elektronskega računa (EN 16931-1) in naslednjo sintakso: UN/EDIFACT INVOIC D16B. Za vsak element semantičnega modela (vključno s podelementi ali dodatnimi komponentami, kot so oznake elementov kodnega seznama) je opredeljen element sintakse, ki vsebuje informacije določenega elementa semantičnega modela. Kakršnakoli neskladja med semantiko, formatom, kardinalnostjo ali strukturo so navedena. Vsa pravila, ki jih je treba upoštevati pri uporabi posamezne sintakse, so neformalno navedena v tej tehnični specifikaciji. Skupaj s to tehnično specifikacijo je objavljen sklop artefaktov za potrjevanje, vključno s formalizacijo pravil.

General Information

Status
Withdrawn
Publication Date
17-Oct-2017
Withdrawal Date
28-Apr-2020
ICS
35.240.20 - IT applications in office work
35.240.63 - IT applications in trade
Technical Committee
CEN/TC 434 - Project Committee - Electronic Invoicing
Drafting Committee
CEN/TC 434/WG 5 - Syntax bindings
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
29-Apr-2020
Directive
2014/55/EU - Directive 2014/55/EU of the European Parliament and of The Council of 16 April 2014 on Electronic Invoicing in Public Procurement
Mandate
M/528 - [C(2014) 7912] Standardisation request to the European standardisation organisations as regards a European standard on electronic invoicing and a set of ancillary standardisation deliverables pursuant to Regulation (EU) No 1025/2012 of the European Parliament and of the Council
Ref Project
SIST-TS CEN/TS 16931-3-4:2018 - Electronic invoicing - Part 3-4: Syntax binding for UN/EDIFACT INVOIC D16B

Relations

Replaced By
CEN/TS 16931-3-4:2020 - Electronic invoicing - Part 3-4: Syntax binding for UN/EDIFACT INVOIC D16B
Effective Date
05-Jun-2019

Buy Standard

TS CEN/TS 16931-3-4:2018TS CEN/TS 16931-3-4:2018
PreviousNext
Technical specification
TS CEN/TS 16931-3-4:2018
English language
221 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16931-3-4:2018
01-januar-2018
(OHNWURQVNRL]GDMDQMHUDþXQRYGHO6LQWDNVDSRYH]DYYVNODGX]81(',)$&7
,192,&'%
Electronic invoicing - Part 3-4: Syntax binding for UN/EDIFACT INVOIC D16B
Elektronische Rechnungsstellung - Teil 3-4: Umsetzung in die Syntax UN/EDIFACT
INVOIC D16B
Facturation électronique - Partie 3-4 : Correspondance syntaxique pour les factures -
Schéma D16B UN/EDIFACT
Ta slovenski standard je istoveten z: CEN/TS 16931-3-4:2017
ICS:
35.240.63 Uporabniške rešitve IT v IT applications in trade
trgovini
SIST-TS CEN/TS 16931-3-4:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16931-3-4:2018

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16931-3-4:2018


CEN/TS 16931-3-4
TECHNICAL SPECIFICATION

SPÉCIFICATION TECHNIQUE

October 2017
TECHNISCHE SPEZIFIKATION
ICS 35.240.20; 35.240.63
English Version

Electronic invoicing - Part 3-4: Syntax binding for
UN/EDIFACT INVOIC D16B
Facturation électronique - Partie 3-4 : Correspondance Elektronische Rechnungsstellung - Teil 3-4: Umsetzung
syntaxique pour les factures - Schéma D16B in die Syntax UN/EDIFACT INVOIC D16B
UN/EDIFACT
This Technical Specification (CEN/TS) was approved by CEN on 30 July 2017 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16931-3-4:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16931-3-4:2018
CEN/TS 16931-3-4:2017 (E)
Contents
Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Syntax binding to UN/EDIFACT . 6
4.1 Introduction . 6
4.2 Data types . 6
4.3 Codes and identifiers . 10
4.4 Mapping the Invoice model . 10
4.5 Validation artefacts . 140
5 Mismatches . 140
5.1 Semantic level .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 16931-1:2017+A1:2019/AC:2020(Corrigendum)
Electronic invoicing - Part 1: Semantic data model of the core elements of an electronic invoice
SIST EN 16931-1:2017+A1:2020/AC:2020

This European Standard establishes a semantic data model of the core elements of an electronic invoice. The semantic model includes only the essential information elements that an electronic invoice needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and for domestic trade. The semantic model may be used by organizations in the private and the public sector for public procurement invoicing. It may also be used for invoicing between private sector enterprises. It has not been specifically designed for invoicing consumers.
This European Standard complies at least with the following criteria:
-   it is technologically neutral;
-   it is compatible with relevant international standards on electronic invoicing;
-   the application of this standard should comply with the requirements for the protection of personal data of Directive 95/46/EC, having due regard to the principles of privacy and data protection by-design, data minimization, purpose limitation, necessity and proportionality;
-   it is consistent with the relevant provisions of Directive 2006/112/EC [2];
-   it allows for the establishment of practical, user-friendly, flexible and cost-efficient electronic invoicing systems;
-   it takes into account the special needs of small and medium-sized enterprises as well as of sub-central contracting authorities and contracting entities;
-   it is suitable for use in commercial transactions between enterprises.

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-3-2:2020(Main)
Electronic invoicing - Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1) invoice and credit note
SIST-TS CEN/TS 16931-3-2:2020

This document specifies the mapping between the semantic model of an electronic invoice, included in EN 16931-1 and the UBL 2.1 syntax (ISO/IEC 19845). For each element in the semantic model (including sub-elements or supplementary components such as Identification scheme identifiers) it is defined which element in the syntax is to be used to contain its information contents. Any mismatches between semantics, format, cardinality or structure are indicated.

  • Technical specification
    265 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-3-3:2020(Main)
Electronic invoicing - Part 3-3: Syntax binding for UN/CEFACT XML Industry Invoice D16B
SIST-TS CEN/TS 16931-3-3:2020

This document specifies the mapping between the semantic model of an electronic invoice, included in EN 16931 1 and the Cross Industry Invoice in the UN/CEFACT XML syntax. For each element in the semantic model (including sub-elements or supplementary components such as Identification scheme identifiers) it is defined which element in the syntax is to be used to contain its information contents. Any mismatches between semantics, format, cardinality or structure are indicated.

  • Technical specification
    218 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-7:2020(Main)
Electronic invoicing - Part 7: Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications
SIST-TS CEN/TS 16931-7:2020

This document applies in case a CIUS is produced as a specification with the objective of registering it in the appropriate registry. This document also establishes requirements for the steps to be taken in the process of creating Core Invoice Usage Specifications (CIUS) as defined in EN 16931-1. Furthermore, this document provides guidance for the creation and implementation of a CIUS.
The following points are the focus:
-   steps that need to be taken in consideration to avoid unnecessary proliferation and fragmentation in the use of CIUSs;
-   guidance on the creation and implementation of CIUSs, with a quality control objective.
It should be noted that it is planned to apply the same principles and processes to extensions that are documented in a separate document.

  • Technical specification
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16931-1:2017+A1:2019(Main)
Electronic invoicing - Part 1: Semantic data model of the core elements of an electronic invoice
SIST EN 16931-1:2017+A1:2020

This European Standard establishes a semantic data model of the core elements of an electronic invoice. The semantic model includes only the essential information elements that an electronic invoice needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and for domestic trade. The semantic model may be used by organizations in the private and the public sector for public procurement invoicing. It may also be used for invoicing between private sector enterprises. It has not been specifically designed for invoicing consumers.
This European Standard complies at least with the following criteria:
-   it is technologically neutral;
-   it is compatible with relevant international standards on electronic invoicing;
-   the application of this standard should comply with the requirements for the protection of personal data of Directive 95/46/EC, having due regard to the principles of privacy and data protection by-design, data minimization, purpose limitation, necessity and proportionality;
-   it is consistent with the relevant provisions of Directive 2006/112/EC [2];
-   it allows for the establishment of practical, user-friendly, flexible and cost-efficient electronic invoicing systems;
-   it takes into account the special needs of small and medium-sized enterprises as well as of sub-central contracting authorities and contracting entities;
-   it is suitable for use in commercial transactions between enterprises.

  • Standard
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16931-6:2017(Main)
Electronic invoicing - Part 6: Result of the test of EN 16931-1 with respect to its practical application for an end user
SIST-TP CEN/TR 16931-6:2018

0.1   Introduction
Directive 2014/55/EU states the following: "The standard shall be tested as to its practical application for an end user. The Commission shall retain overall responsibility for the testing and shall ensure that, during the performance of the test, special account be taken of the respect for the criteria of practicality, user-friendliness and possible implementation costs in accordance with the second subparagraph of paragraph 1.
0.2   In scope
This CEN Technical Report describes the methodology used for testing at a semantic level and at the syntax level, as well as describing the semantic testing, the syntax testing and testing of the validation artefacts that represent EN 16931-1 and the test results. The testing of the validation artefacts will ensure they can be used to automatically check conformance with EN 16931-1.
0.3   Out of scope
During meetings with the European Commission they agreed to supplement the testing activities as the need arises. This included the provision of a hosted GITB (Global eBusiness Interoperability Test Beds) environment for syntax testing and to run separate studies such as assessment of implementation costs. The results of these studies will be published separately by CEF.
It was agreed at earlier meetings that piloting was out of scope i.e. perform live transactions, because resources were unavailable to undertake this in the time allowed. Instead we could simulate scenarios by leveraging on the experience of our experts.
Working Group 3 (hereafter WG3) in CEN/TC 434 has produced the syntax bindings and validation artefacts, and the task of quality assurance of these deliverables has been the responsibility of WG3.
VAT issues are complex and require juridical or legal expertise. VAT is also sometimes very sectoral or even country specific. Certain sections, in the VAT Directive, apply to all trades, others deal with special cases. The model should facilitate, but cannot be seen as an enforcement model. Therefore, VAT compliance would have to be checked on a case by case basis, and is deemed out of scope. The Commission had taken this up and given the draft to their VAT experts. The result was that no issues were discovered.
Article 226(B) of the VAT Directive [2] describes the simplified invoice. There are significantly fewer requirements for this invoice. It can only be used when the value is below a specific total amount. The requirement is to provide a model for low value purchases such as train tickets, receipts etc. The key difference is that it doesn’t require the Buyer to be identified. Due to limited resources the simplified invoice requirements were not checked and so are being considered as an extension to be developed at a future stage.
The changing between form and format was discussed. It was generally agreed, based on the VAT Directive, that an eInvoice cannot change form i.e. transformed to paper, however it can change format i.e. syntax. This is common in EDI systems and for legal reasons the original needs to be clarified. This means if it is in paper form it shall be archived in paper form and if it is electronic it shall stay in electronic form. An electronic invoice may change format, provided this is documented in an audit trail. However, in Norway and France the legislation states that the format received from the Supplier is the original and no other. Also, general practice in Germany requires that the invoice received from the Supplier be archived and considered as the original. There may be other exceptions in some Member States. This was also considered to be out of scope for this document and would be dealt with by the Member State involved.
It was agreed at an initial Plenary session that we should test all four syntaxes as the decision to select syntaxes had not yet been made. However ultimately the group concluded, based on our research, that the ISO 20022 Financial Invoice was not in sufficient use to justify being included.

  • Technical report
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-3-1:2017(Main)
Electronic invoicing - Part 3-1: Methodology for syntax bindings of the core elements of an electronic invoice
SIST-TS CEN/TS 16931-3-1:2017

This Technical Specification (TS) specifies the methodology of the mapping between the semantic model of an electronic invoice, included in EN 16931-1 and a syntax. For each element in the semantic model (including sub-elements or supplementary components such as Identification scheme identifiers) it should be defined which element in the syntax is to be used to contain its information contents. Any mismatches between semantics, format, cardinality or structure are indicated.

  • Technical specification
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16931-5:2017(Main)
Electronic invoicing - Part 5: Guidelines on the use of sector or country extensions in conjunction with EN 16931-1, methodology to be applied in the real environment
SIST-TP CEN/TR 16931-5:2017

This Technical Report describes how trading partners may extend the core invoice model and the related business rules and code lists, in order to support business cases that are specific to their trading environment, while at the same time maintaining semantic interoperability with the core invoice model.
This Technical Report does not define a methodology for creation of core invoice usage specification, nor does it describe the detailed process of syntax binding.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16931-4:2017(Main)
Electronic invoicing - Part 4: Guidelines on interoperability of electronic invoices at the transmission level
SIST-TP CEN/TR 16931-4:2017

This Technical Report recommends a set of Guidelines to ensure interoperability at the transmission level to be used in conjunction with the European Norm (EN) for the semantic data model of the core elements of an electronic invoice and its other associated deliverables. The Guidelines are by nature non-prescriptive and non-binding.
These Guidelines take into account the following aspects:
1)   recommending best practices for use at the transmission level;
2)   supporting interoperability between all the parties and systems that need to interact and within the various operating models in common use;
3)   ensuring a level playing field for the various operating models and bi-lateral implementations and for the use of existing and future infrastructures, which support e-Invoicing;
4)   promoting a common terminology and non-proprietary standards for transmission and related areas;
5)   ensuring the authenticity of origin and integrity of electronic invoice content;
6)   providing guidance on data protection, on the enablement of format conversion, and on e-invoice legibility, including the use of a readable visual presentations, as required;
7)   providing guidance for identification, addressing and routing;
8)   identifying requirements for robust legal frameworks and governance arrangements;
9)   recognizing the roles of trading parties, solution and service providers and related infrastructure providers.
The Objectives of the Guidelines are:
10)   to support the implementation of the EU Directive 2014/55/EU on e-Invoicing and the core invoice model;
11)   to propose best practices and recommendations for standards to enable electronic exchange of e-Invoices and related data between participants by providing a basis for interoperability at the transmission level, based on common requirements and scenarios;
12)   to facilitate Straight Through Processing (STP) by the key actors in the supply chain (Buyers, Sellers, Tax Authorities, Agents, Banks, Service and Solution Providers, etc.);
13)   to provide a set of non-prescriptive and non-binding Guidelines and recommendations that are applicable to all common operating models for e-invoice exchange and transmission whilst also providing recommendations specific to each of the common operating models.
To accomplish these objectives, the Guidelines are based on the following Requirements and Guiding Principles:
14)   the need to cover the transmission of e-invoices and related documents from the system of the sending trading party to the system of the receiving trading party, including transmission issues for any intermediary platforms;
15)   the need to allow any seller in any European (EU, EEA and Switzerland) country to deliver invoices to any buyer in any location in another European country (EU, EEA and Switzerland);
16)   the need to support all common invoicing processes and modes of operation;
17)   the need to be compatible with the current legislative and regulatory environment for the exchange of e-Invoices and related data;
18)   the need to support the European Norm and other commonly accepted content standards;
19)   the need to ensure that other document exchanges beyond e-Invoicing can be supported;
20)   the need to establish clear boundaries between the collaborative and competitive domains;
21)   the need to enable competition between business models, solutions and service providers and foster innovation;
22)   the need to ensure that European supply chains remain an integrated and competitive part of the global economy;
23)   the need to promote network effects leading to the development of critical mass as e-Invoicing becomes the dominant mode of invoicing (network effects result in a service becoming more valuable as more trading parties use it, thus creating a virtuous circle and further momentum for adoption).
The following items are considered to be in the competitive domain and therefore out of scope of the Recommendations:
(....)

  • Technical report
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 16931-2:2017(Main)
Electronic invoicing - Part 2: List of syntaxes that comply with EN 16931-1
SIST-TS CEN/TS 16931-2:2017

This Technical Specification provides in Clause 7 the list of syntaxes that complies with and allows to express syntactically the core invoice model as specified in EN 16931 1:2017, according to the selection criteria provided by the Standardization Request [1].
The selection of the syntaxes also derived from the Standardization Request [1]. It states that, to limit costs on public authorities, the list should ideally not exceed five syntaxes. Four syntaxes were taken into account and assessed according to criteria provided by the Standardization Request [1].

  • Technical specification
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day