Geographic information - Spatial referencing by geographic identifiers (ISO 19112:2019)

This document defines the conceptual schema for spatial references based on geographic identifiers. It establishes a general model for spatial referencing using geographic identifiers and defines the components of a spatial reference system. It also specifies a conceptual scheme for a gazetteer.
Spatial referencing by coordinates is addressed in ISO 19111. However, a mechanism for recording complementary coordinate references is included in this document.
This document enables producers of data to define spatial reference systems using geographic identifiers and assists users in understanding the spatial references used in datasets. It enables gazetteers to be constructed in a consistent manner and supports the development of other standards in the field of geographic information.
This document is applicable to digital geographic data, and its principles may be extended to other forms of geographic data such as maps, charts and textual documents.

Geoinformation - Raumbezug mit (geographischen) Identifikatoren (ISO 19112:2019)

Information géographique - Système de références spatiales par identificateurs géographiques (ISO 19112:2019)

Le présent document définit le schéma conceptuel d'un système de références spatiales basé sur des identificateurs géographiques. Il établit un modèle général du système de références spatiales utilisant des identificateurs géographiques et définit les composants de ce système. Il spécifie également le schéma conceptuel d'un répertoire géographique.
Le système de références spatiales par coordonnées est traité dans l'ISO 19111. Un mécanisme destiné à l'enregistrement de coordonnées de référence complémentaires est toutefois inclus dans le présent document.
Le présent document permet aux producteurs de données de définir des systèmes de références spatiales utilisant des identificateurs géographiques et aide les utilisateurs à comprendre les références spatiales utilisées dans les ensembles de données. Il permet de construire des répertoires géographiques de manière cohérente et soutient le développement d'autres normes dans le domaine de l'information géographique.
Le présent document est applicable aux données géographiques numériques et ses principes peuvent être élargis à d'autres types de données géographiques tels que les cartes, les tableaux et les textes.

Geografske informacije - Lociranje z geografskimi identifikatorji (ISO 19112:2019)

Ta standard določa pojmovno shemo lociranja na podlagi geografskih identifikatorjev. Vzpostavlja splošni model lociranja z uporabo geografskih identifikatorjev in opredeljuje sestavne dele sistema lociranja. Določa tudi pojmovno shemo geografskega leksikona. Lociranje s koordinatami je obravnavano v standardu ISO 19111. Vendar je v ta dokument vključen tudi mehanizem za beleženje dopolnilnih koordinatnih referenc. Ta dokument omogoča proizvajalcem podatkov, da določijo sisteme lociranja z uporabo geografskih identifikatorjev, in pomaga uporabnikom, da razumejo sistem lociranja, ki se uporablja v naborih podatkov. Omogoča dosledno sestavljanje geografskega leksikona in podpira razvoj drugih standardov na področju geografskih informacij. Ta dokument se uporablja za digitalne geografske podatke in v njem opisana načela lahko veljajo tudi za druge oblike geografskih podatkov, kot so zemljevidi, karte in dokumenti z besedilom.

General Information

Status
Published
Publication Date
19-Mar-2019
Withdrawal Date
29-Sep-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Mar-2019
Completion Date
20-Mar-2019

Relations

Buy Standard

Standard
EN ISO 19112:2019
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19112:2018
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19112:2019
01-november-2019
Nadomešča:
SIST EN ISO 19112:2005
Geografske informacije - Lociranje z geografskimi identifikatorji (ISO 19112:2019)
Geographic information - Spatial referencing by geographic identifiers (ISO 19112:2019)
Geoinformation - Raumbezug mit (geographischen) Identifikatoren (ISO 19112:2019)
Information géographique - Système de références spatiales par identificateurs
géographiques (ISO 19112:2019)
Ta slovenski standard je istoveten z: EN ISO 19112:2019
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19112:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19112:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 19112:2019


EN ISO 19112
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 35.240.70 Supersedes EN ISO 19112:2005
English Version

Geographic information - Spatial referencing by
geographic identifiers (ISO 19112:2019)
Information géographique - Système de références Geoinformation - Raumbezug mit (geographischen)
spatiales par identificateurs géographiques (ISO Identifikatoren (ISO 19112:2019)
19112:2019)
This European Standard was approved by CEN on 26 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19112:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19112:2019
EN ISO 19112:2019 (E)
Contents Page
European foreword . 3
Endorsement notice . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19112:2019
EN ISO 19112:2019 (E)
European foreword
This document (EN ISO 19112:2019) has been prepared by Technical Committee ISO/TC 211
"Geographic information/Geomatics" in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 19112:2005.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19112:2019 has been approved by CEN as EN ISO 19112:2019 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 19112:2019

---------------------- Page: 6 --
...

SLOVENSKI STANDARD
oSIST prEN ISO 19112:2018
01-marec-2018
Geografske informacije - Lociranje z geografskimi identifikatorji (ISO/DIS
19112:2017)
Geographic information - Spatial referencing by geographic identifiers (ISO/DIS
19112:2017)
Geoinformation - Raumbezug mit (geographischen) Identifikatoren (ISO/DIS
19112:2017)
Information géographique - Système de références spatiales par identificateurs
géographiques (ISO/DIS 19112:2017)
Ta slovenski standard je istoveten z: prEN ISO 19112
ICS:
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
oSIST prEN ISO 19112:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19112:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19112:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19112
ISO/TC 211 Secretariat: SIS
Voting begins on: Voting terminates on:
2017-12-29 2018-03-23
Geographic information — Spatial referencing by
geographic identifiers
Information géographique — Système de références spatiales par identificateurs géographiques
ICS: 35.240.70
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19112:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19112:2018
ISO/DIS 19112:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19112:2018
ISO/DIS 19112:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and notation . 1
3.1 Terms and definitions . 1
3.2 Conceptual schema notation . 2
4 Conformance . 2
4.1 General . 2
4.2 Spatial reference system using geographic identifiers conformance class .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.