EN ISO 11495:2019

Jewellery and precious metals - Determination of palladium in palladium alloys - ICP-OES method using an internal standard element (ISO 11495:2019)

This document describes an analytical procedure for the determination of palladium in palladium alloys with a nominal content up to 990 ? (parts per thousand), including alloys according to ISO 9202.

Schmuck und Edelmetalle - Bestimmung von Palladium in Palladiumschmucklegierungen - ICP-OES-Verfahren unter Verwendung eines internen Standardelements (ISO 11495:2019)

Dieses Dokument beschreibt ein analytisches Verfahren zur Bestimmung von Palladium in Palladium-
Legierungen mit einem Nenngehalt von bis zu 990 ‰ (Promille, en: parts per thousand), einschließlich
Legierungen nach ISO 9202.

Joaillerie, bijouterie et métaux précieux - Dosage du palladium dans les alliages de palladium - Méthode par ICP-OES utilisant un étalon interne (ISO 11495:2019)

Le présent document décrit un mode opératoire analytique pour le dosage du palladium dans les alliages de palladium, d'une teneur nominale allant jusqu'à 990 ? (millièmes), notamment pour les alliages conformes à l'ISO 9202.

Nakit in plemenite kovine - Določevanje paladija v zlitinah paladija - Metoda ICP-OES z uporabo notranjega standardnega elementa (ISO 11495:2019)

Ta dokument opisuje analitski postopek za določevanje paladija v zlitinah paladija z nominalno vsebnostjo do 990 ‰ (delov na tisoč), vključujoč zlitine v skladu s standardom ISO 9202.

General Information

• Status: Published
• Publication Date: 20-Aug-2019
• Withdrawal Date: 28-Feb-2020
• ICS: 39.060 - Jewellery
• Technical Committee: CEN/TC 410 - Project Committee - Consumer confidence and nomenclature in the diamond industry
• Drafting Committee: CEN/SS M21 - Precious metals - Applications in jewellery and associated products
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Aug-2019
• Completion Date: 21-Aug-2019
• Ref Project: SIST EN ISO 11495:2019 - Jewellery and precious metals - Determination of palladium in palladium alloys - ICP-OES method using an internal standard element (ISO 11495:2019)

Relations

• Replaces: EN ISO 11495:2016 - Jewellery - Determination of palladium in palladium jewellery alloys - ICP-OES method using yttrium as internal standard element (ISO 11495:2014)
• Effective Date: 28-Aug-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11495:2019
01-november-2019
Nadomešča:
SIST EN ISO 11495:2016
Nakit in plemenite kovine - Določevanje paladija v zlitinah paladija - Metoda ICP-
OES z uporabo notranjega standardnega elementa (ISO 11495:2019)
Jewellery and precious metals - Determination of palladium in palladium alloys - ICP-
OES method using an internal standard element (ISO 11495:2019)
Schmuck und Edelmetalle - Bestimmung von Palladium in
Palladiumschmucklegierungen - ICP-OES-Verfahren unter Verwendung eines internen
Standardelements (ISO 11495:2019)
Joaillerie et métals précieux - Dosage du palladium dans les alliages de palladium -
Méthode par l'ICP-OES, utilisant un étalon interne (ISO 11495:2019)
Ta slovenski standard je istoveten z: EN ISO 11495:2019
ICS:
39.060 Nakit Jewellery
SIST EN ISO 11495:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11495:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 11495:2019


EN ISO 11495
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2019
EUROPÄISCHE NORM
ICS 39.060 Supersedes EN ISO 11495:2016
English Version

Jewellery and precious metals - Determination of
palladium in palladium alloys - ICP-OES method using an
internal standard element (ISO 11495:2019)
Joaillerie, bijouterie et métaux précieux - Dosage du Schmuck und Edelmetalle - Bestimmung von Palladium
palladium dans les alliages de palladium - Méthode par in Palladiumschmucklegierungen - ICP-OES-Verfahren
ICP-OES utilisant un étalon interne (ISO 11495:2019) unter Verwendung eines internen Standardelements
(ISO 11495:2019)
This European Standard was approved by CEN on 21 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11495:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11495:2019
EN ISO 11495:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11495:2019
EN ISO 11495:2019 (E)
European foreword
This document (EN ISO 11495:2019) has been prepared by Technical Committee ISO/TC 174 "Jewellery
and precious metals" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2020, and conflicting national standards
shall be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11495:2016.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11495:2019 has been approved by CEN as EN ISO 11495:2019 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 114
...