Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)

Specifies two methods for determining the emission sound pressure levels of machinery and equipment at a work station and at other specified positions nearby, by calculation from the sound power level. Permits the comparison of the sound power of different units of a given family of machinery.

Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten aus dem Schallleistungspegel (ISO 11203:1995)

Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées à partir du niveau de puissance acoustique (ISO 11203:1995)

NEW!IEC 60034-1:2017 est disponible sous forme de IEC 60034-1:2017 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 60034-1:2017 est applicable à toutes les machines électriques tournantes, excepté celles qui sont couvertes par d’autres normes IEC, par exemple l’IEC 60349. Les machines comprises dans le domaine d’application du présent document peuvent également être soumises à des exigences nouvelles, modifiées ou complémentaires figurant dans d’autres normes, par exemple, les séries IEC 60079 et IEC 60092. Cette nouvelle édition contient de multiples calrifications, corrections et améliorations par rapport à l'édition précédente.

Akustika - Emisija hrupa naprav in opreme - Ugotavljanje emisijske ravni zvočnega tlaka na mestu delovanja in na drugih opredeljenih mestih z ravni zvočne moči (ISO 11203:1995)

General Information

Status
Published
Publication Date
11-Aug-2009
Withdrawal Date
27-Feb-2010
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
12-Aug-2009
Due Date
25-Sep-2010
Completion Date
12-Aug-2009

Relations

Buy Standard

Standard
EN ISO 11203:2009
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten (ISO 11203:1995)Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées à partir du niveau de puissance acoustique (ISO 11203:1995)Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)17.140.20Emisija hrupa naprav in opremeNoise emitted by machines and equipmentICS:Ta slovenski standard je istoveten z:EN ISO 11203:2009SIST EN ISO 11203:2009en01-november-2009SIST EN ISO 11203:2009SLOVENSKI
STANDARDSIST EN ISO 11203:19971DGRPHãþD



SIST EN ISO 11203:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 11203August 2009ICS 17.140.20Supersedes EN ISO 11203:1995
English VersionAcoustics - Noise emitted by machinery and equipment -Determination of emission sound pressure levels at a workstation and at other specified positions from the sound powerlevel (ISO 11203:1995)Acoustique - Bruit émis par les machines et équipements -Détermination des niveaux de pression acoustiqued'émission au poste de travail et en d'autres positionsspécifiées à partir du niveau de puissance acoustique (ISO11203:1995)Akustik - Geräuschabstrahlung von Maschinen undGeräten - Bestimmung von Emissions-Schalldruckpegelnam Arbeitsplatz und an anderen festgelegten Orten (ISO11203:1995)This European Standard was approved by CEN on 27 July 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 11203:2009: ESIST EN ISO 11203:2009



EN ISO 11203:2009 (E) 2 Contents Page Foreword .3Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC .4Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .5 SIST EN ISO 11203:2009



EN ISO 11203:2009 (E) 3 Foreword The text of ISO 11203:1995 has been prepared by Technical Committee ISO/TC 43 “Acoustics” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11203:2009 by Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2010, and conflicting national standards shall be withdrawn at the latest by February 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11203:1995. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directives. For relationship with EU Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European St
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.