Air conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance

This European Standard covers air conditioners, heat pumps and liquid chilling packages, including comfort and process chillers. It applies to factory made units defined in EN 14511-1, except single duct, double duct, control cabinet and close control units. It also covers direct expansion-to-water(brine) heat pumps (DX-to-water) as defined in EN 15879-1.
This European Standard also covers hybrid heat pumps as defined in this standard.
This European Standard gives the temperatures and part load conditions and the calculation methods for the determination of seasonal energy efficiency SEER and SEERon, seasonal space cooling energy efficiency ηs,c seasonal coefficient of performance SCOP, SCOPon and SCOPnet, and seasonal space heating energy efficiency ηs,h and seasonal energy performance ratio SEPR.
Such calculation methods may be based on calculated or measured values.
In case of measured values, this European Standard covers the test methods for determination of capacities, EER and COP values during active mode at part load conditions. It also covers test methods for electric power consumption during thermostat-off mode, standby mode, off-mode and crankcase heater mode.
NOTE 1 The word "unit" is used instead of the full terms of the products.
NOTE 2 The word "cooling" is used to refer to both space cooling and process cooling.
NOTE 3 The word "heating" is used to refer to space heating.

Luftkonditionierer, Flüssigkeitskühlsätze und Wärmepumpen mit elektrisch angetriebenen Verdichtern zur Raumbeheizung und -kühlung - Prüfung und Leistungsbemessung unter Teillastbedingungen und Berechnung der jahreszeitbedingten Leistungszahl

Das vorliegende Dokument behandelt Luftkonditionierer, Wärmepumpen und Flüssigkeitskühlsätze, einschließlich Komfort- und Prozesskühler. Sie gilt für werksseitig hergestellte Geräte nach EN 14511 1, mit Ausnahme von Einkanal-Luftkonditionierern, Zweikanal-Luftkonditionierern, Schaltschrank-Kühlgeräten und Verfahrens-Luftkonditionierern. Sie behandelt zudem Direktübertragung-Wasser/Sole-Wärmepumpen, wie sie in EN 15879 1 festgelegt sind.
Dieses Dokument behandelt des Weiteren Hybridwärmepumpen, wie sie in dieser Norm definiert werden.
Dieses Dokument enthält die Temperaturen und Teillastbedingungen sowie Berechnungsverfahren zur Ermittlung der saisonalen Arbeitszahl im Kühlbetrieb SEER und SEERon, der jahreszeitbedingten Raum-kühlungs-Energieeffizienz ηs,c, der saisonalen Arbeitszahl im Heizbetrieb SCOP, SCOPon und SCOPnet, der jahreszeitbedingten Raumheizungs-Energieeffizienz ηs,h sowie der Jahres-Energieeffizienz SEPR.
Derartige Berechnungsverfahren können auf Rechen- oder Messwerten beruhen.
Im Fall von Messwerten behandelt dieses Dokument die Prüfverfahren zur Ermittlung von Leistungen, EER- und COP-Werten im Aktiv-Modus unter Teillastbedingungen. Außerdem behandelt sie Prüfverfahren zur Ermittlung der Leistungsaufnahme im Modus „Temperaturregler AUS“, im Bereitschaftsmodus, im Modus „Aus“ und im Modus mit Kurbelgehäuseheizung.
ANMERKUNG 1   Das Wort „Gerät“ wird anstelle der vollständigen Produktbezeichnungen verwendet.
ANMERKUNG 2   Das Wort „Kühlung“ bezieht sich sowohl auf die Raumkühlung als auch auf die Prozesskühlung.
ANMERKUNG 3   Das Wort „Heizung“ bezieht sich auf die Raumheizung.

Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur avec compresseur entraîné par moteur électrique pour le chauffage et la réfrigération des locaux - Essais et détermination des caractéristiques à charge partielle et calcul de performance saisonnière

La présente Norme européenne couvre les climatiseurs, les pompes à chaleur et les groupes refroidisseurs de liquide, y compris les refroidisseurs de confort et industriels. Elle s'applique aux appareils fabriqués en usine définis dans l'EN 14511-1, excepté les appareils à simple et à double conduit, les appareils pour armoire de commande et les appareils pour enceinte contrôlée. Elle couvre également les pompes à chaleur à échange direct avec l'eau (glycolée) (DX/eau (glycolée)) telles que définies dans l'EN 15879-1.
La présente Norme européenne couvre également les pompes à chaleur hybrides telles que définies dans la présente Norme.
La présente Norme européenne donne les températures, les conditions de charge partielle et les méthodes de calcul permettant de déterminer l'efficacité énergétique saisonnière SEER et SEERon, l'efficacité énergétique saisonnière du refroidissement des locaux ηs,c, le coefficient de performance saisonnier SCOP, SCOPon et SCOPnet, l'efficacité énergétique saisonnière du chauffage des locaux ηs,h et le coefficient d'efficacité énergétique saisonnier (SEPR)
Ces méthodes de calcul peuvent être fondées sur des valeurs mesurées ou calculées.
Dans le cas de valeurs mesurées, la présente Norme européenne couvre les méthodes d'essai relatives à la détermination des puissances et des valeurs d'EER et de COP pendant le mode actif, dans les conditions de charge partielle. Elle couvre également les méthodes d'essai relatives à la puissance absorbée en mode arrêt par thermostat, en mode veille, en mode arrêt et en mode dispositif de chauffage de carter.
NOTE 1 Le mot "appareil" est utilisé à la place des termes complets des produits.
NOTE 2 Le mot "refroidissement" est utilisé à la fois pour la référence au refroidissement des locaux et au refroidissement industriel.
NOTE 3 Le mot "chauffage" est utilisé pour la référence au chauffage des locaux.

Klimatske naprave, enote za hlajenje kapljevine ter toplotne črpalke za ogrevanje in hlajenje prostora z električnimi kompresorji - Preskušanje in ocenitev ob delni obremenitvi ter izračun letnega učinka

Ta evropski standard se nanaša na klimatske naprave, toplotne črpalke in enote za tekočinsko hlajenje, vključno z ohlajevalniki za prostore in proizvodnjo. Uporablja se za industrijske enote, opredeljene v standardu EN 14511-1, razen za enote z enim vodom, dvema vodoma, enote s stikalno omaro in enote za neposredni nadzor. Vključuje tudi toplotne črpalke z direktno ekspanzijo (slanica) (DX-v-vodo), kot je opredeljeno v standardu EN 15879-1. Ta evropski standard zajema tudi hibridne toplotne črpalke, kot so opredeljene v tem standardu. Ta evropski standard določa temperature in pogoje delne obremenitve ter računske metode za določanje sezonske energetske učinkovitosti SEER in SEERon, sezonsko energetsko učinkovitost hlajenja prostorov ηs,c, sezonski koeficient učinkovitosti SCOP, SCOPon in SCOPnet ter sezonsko energetsko učinkovitost ogrevanja prostorov ηs,h in razmerje sezonske energetske učinkovitosti SEPR. Takšne metode izračuna lahko temeljijo na izračunanih ali izmerjenih vrednostih. V primeru izmerjenih vrednosti ta evropski standard zajema preskusne metode za določanje zmogljivosti, vrednosti EER in COP med aktivnim delovanjem pri pogojih delne obremenitve. Zajema tudi preskusne metode za porabo električne energije enote ob izklopljenem termostatu, v stanju pripravljenosti, ob izklopu in v načinu grelnika ohišja. OPOMBA 1: Namesto celotnih besednih zvez izdelkov se uporablja izraz »enota«. OPOMBA 2: Beseda »hlajenje« se uporablja tako za hlajenje prostorov kot za hlajenje procesov. OPOMBA 3: Beseda »ogrevanje« se uporablja za ogrevanje prostorov.

General Information

Status
Withdrawn
Publication Date
11-Dec-2018
Withdrawal Date
12-Jul-2022
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
13-Jul-2022

Relations

Buy Standard

Standard
EN 14825:2019 - BARVE
English language
133 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 14825:2017 - BARVE
English language
130 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luftkonditionierer, Flüssigkeitskühlsätze und Wärmepumpen mit elektrisch angetriebenen Verdichtern zur Raumbeheizung und -kühlung - Prüfung und Leistungsbemessung unter Teillastbedingungen und Berechnung der jahreszeitbedingten LeistungszahlClimatiseurs, groupes refroidisseurs de liquide et pompes à chaleur avec compresseur entraîné par moteur électrique pour le chauffage et la réfrigération des locaux - Essais et détermination des caractéristiques à charge partielle et calcul de performance saisonnièreAir conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling - Testing and rating at part load conditions and calculation of seasonal performance91.140.30VLVWHPLVentilation and air-conditioning systems27.080Heat pumps23.120QDSUDYHVentilators. Fans. Air-conditionersICS:Ta slovenski standard je istoveten z:EN 14825:2018SIST EN 14825:2019en,fr,de01-april-2019SIST EN 14825:2019SLOVENSKI
STANDARDSIST EN 14825:20161DGRPHãþD



SIST EN 14825:2019



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14825
December
t r s z ICS
t yä r z râ
{ sä s v rä u r Supersedes EN
s v z t wã t r s xEnglish Version
Air conditionersá liquid chilling packages and heat pumpsá with electrically driven compressorsá for space heating and cooling æ Testing and rating at part load conditions and calculation of seasonal performance Climatiseursá groupes refroidisseurs de liquide et pompes à chaleur avec compresseur entraîné par moteur électrique pour le chauffage et la réfrigération des locaux æ Essais et détermination des caractéristiques à charge partielle et calcul de performance saisonnière
Luftkonditioniererá Flüssigkeitskühlsätze und Wärmepumpen mit elektrisch angetriebenen Verdichtern zur Raumbeheizung und ækühlung æ Prüfung und Leistungsbemessung unter Teillastbedingungen und Berechnung der jahreszeitbedingten Leistungszahl This European Standard was approved by CEN on
t w June
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v z t wã t r s z ESIST EN 14825:2019



EN 14825:2018 (E) 2 Contents Page European foreword . 7 Introduction . 9 1 Scope . 10 2 Normative references . 10 3 Terms, definitions, symbols, abbreviated terms and units . 11 3.1 Terms and definitions . 11 3.2 Symbols, abbreviated terms and units . 23 4 Part load conditions for space cooling . 28 4.1 General . 28 4.2 Air-to-air units . 28 4.3 Water(brine)-to-air units .
...

SLOVENSKI STANDARD
oSIST prEN 14825:2017
01-april-2017
.OLPDWVNHQDSUDYHHQRWH]DWHNRþLQVNRKODMHQMHLQWRSORWQHþUSDONH]HOHNWULþQLPL
NRPSUHVRUML]DRJUHYDQMHLQKODMHQMHSURVWRUD3UHVNXãDQMHLQRFHQLWHYREGHOQL
REUHPHQLWYLWHUL]UDþXQOHWQHJDXþLQND
Air conditioners, liquid chilling packages and heat pumps, with electrically driven
compressors, for space heating and cooling - Testing and rating at part load conditions
and calculation of seasonal performance
Luftkonditionierer, Flüssigkeitskühlsätze und Wärmepumpen mit elektrisch
angetriebenen Verdichtern zur Raumbeheizung und -kühlung - Prüfung und
Leistungsbemessung unter Teillastbedingungen und Berechnung der
jahreszeitbedingten Leistungszahl
Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur avec compresseur
entraîné par moteur électrique pour le chauffage et la réfrigération des locaux - Essais et
détermination des caractéristiques à charge partielle et calcul de performance
saisonnière
Ta slovenski standard je istoveten z: prEN 14825
ICS:
23.120 =UDþQLNL9HWUQLNL.OLPDWVNH Ventilators. Fans. Air-
QDSUDYH conditioners
27.080 7RSORWQHþUSDONH Heat pumps
91.140.30 3UH]UDþHYDOQLLQNOLPDWVNL Ventilation and air-
VLVWHPL conditioning systems
oSIST prEN 14825:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14825:2017

---------------------- Page: 2 ----------------------
oSIST prEN 14825:2017


DRAFT
EUROPEAN STANDARD
prEN 14825
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2017
ICS 27.080; 91.140.30 Will supersede EN 14825:2016
English Version

Air conditioners, liquid chilling packages and heat pumps,
with electrically driven compressors, for space heating and
cooling - Testing and rating at part load conditions and
calculation of seasonal performance
Climatiseurs, groupes refroidisseurs de liquide et Luftkonditionierer, Flüssigkeitskühlsätze und
pompes à chaleur avec compresseur entraîné par Wärmepumpen mit elektrisch angetriebenen
moteur électrique pour le chauffage et la réfrigération Verdichtern zur Raumbeheizung und -kühlung -
des locaux - Essais et détermination des Prüfung und Leistungsbemessung unter
caractéristiques à charge partielle et calcul de Teillastbedingungen und Berechnung der
performance saisonnière jahreszeitbedingten Leistungszahl
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 113.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14825:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14825:2017
prEN 14825:2017 (E)
Contents Page
European foreword . 7
Introduction . 10
1 Scope . 11
2 Normative references .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.