Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)

ISO 10768:2010 specifies a test method for the determination of the resistance of elastic materials for footwear, to repeated extension produced during normal walking. The test can be carried out before and after accelerated ageing. This method is applicable to any elastic material used for footwear.

Schuhe - Prüfverfahren zur Bestimmung der Beständigkeit von elastischen Materialien für Schuhe gegen wiederholte Dehnung - Ermüdungsbeständigkeit (ISO 10768:2010)

Diese Internationale Norm legt ein Prüfverfahren zur Bestimmung der Beständigkeit von elastischen Materialien
für Schuhe gegen wiederholte Dehnung fest, die durch normales Gehen erzeugt wird. Diese Prüfung
kann vor und nach beschleunigter Alterung durchgeführt werden. Dieses Verfahren gilt für sämtliche Arten
von elastischen Materialien, die in Schuhen verwendet werden.

Chaussures - Méthode d'essai pour la détermination de la résistance des élastiques de chaussures à des extensions répétées - Résistance à la fatigue (ISO 10768:2010)

L'ISO 10768:2010 spécifie une méthode d'essai pour la détermination de la résistance des matériaux élastiques des chaussures aux extensions répétées qui se produisent durant la marche normale. L'essai peut être réalisé avant et après un vieillissement accéléré. Cette méthode s'applique à tout matériau élastique utilisé pour des chaussures.

Obutev - Preskusna metoda za ugotavljanje odpornosti elastičnih materialov za obutev proti ponavljajočemu raztezanju - Odpornost proti utrujanju (ISO 10768:2010)

Ta mednarodni standard opredeljuje preskusno metodo za ugotavljanje odpornosti elastičnih materialov za obutev proti ponavljajočemu raztezanju, ki nastane pri normalni hoji. Preskus je mogoče opraviti pred in po pospešenem staranju. Ta metoda se lahko uporablja za vsak elastični material, ki se uporablja za obutev.

General Information

Status
Published
Publication Date
30-Jun-2010
Withdrawal Date
30-Jan-2011
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Jul-2010
Due Date
19-Dec-2010
Completion Date
01-Jul-2010

Buy Standard

Standard
EN ISO 10768:2010
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10768:2010
01-oktober-2010
2EXWHY3UHVNXVQDPHWRGD]DXJRWDYOMDQMHRGSRUQRVWLHODVWLþQLKPDWHULDORY]D
REXWHYSURWLSRQDYOMDMRþHPXUD]WH]DQMX2GSRUQRVWSURWLXWUXMDQMX ,62

Footwear - Test method for the determination of the resistance of elastic materials for
footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
Schuhe - Prüfverfahren zur Bestimmung der Beständigkeit von elastischen Materialien
für Schuhe gegen wiederholte Dehnung - Ermüdungsbeständigkeit (ISO 10768:2010)
Chaussures - Méthode d'essai pour la détermination de la résistance des élastiques de
chaussures à des extensions répétées - Résistance à la fatigue (ISO 10768:2010)
Ta slovenski standard je istoveten z: EN ISO 10768:2010
ICS:
61.060 Obuvala Footwear
SIST EN ISO 10768:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10768:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 10768:2010


EUROPEAN STANDARD
EN ISO 10768

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2010
ICS 61.060
English Version
Footwear - Test method for the determination of the resistance
of elastic materials for footwear to repeated extension - Fatigue
resistance (ISO 10768:2010)
Chaussures - Méthode d'essai pour la détermination de la Schuhe - Prüfverfahren zur Bestimmung der Beständigkeit
résistance des élastiques de chaussures à des extensions von elastischen Materialien für Schuhe gegen wiederholte
répétées - Résistance à la fatigue (ISO 10768:2010) Dehnung - Ermüdungsbeständigkeit (ISO 10768:2010)
This European Standard was approved by CEN on 9 June 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10768:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10768:2010
EN ISO 10768:2010 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 10768:2010
EN ISO 10768:2010 (E)
Foreword
This document (EN ISO 10768:2010) has been prepared by Technical Committee CEN/TC 309 “Footwear”,
the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2011, and conflicting national standards shall be withdrawn at
the latest by January 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 10768:2010

---------------------- Page: 6 ----------------------

SIST EN ISO 10768:2010

INTERNATIONAL ISO
STANDARD 10768
First edition
2010-07-01


Footwear — Test method for the
determination of the resistance of elastic
materials for foot
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.