iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 9145:2018

(Main)

Aerospace series - Requirements for Advanced Product Quality Planning and Production Part Approval Process

Aerospace series - Requirements for Advanced Product Quality Planning and Production Part Approval Process

This standard establishes requirements for performing and documenting APQP and PPAP. APQP begins
with conceptual product needs and extends through product definition, production planning, product
and process validation (i.e. PPAP), product use, and post-delivery service. This standard integrates and
collaborates with the requirements of the EN 9100, EN 9102, EN 9103 and EN 9110 standards.
The requirements specified in this standard are complementary (not alternative) to contractual and
applicable statutory and regulatory requirements. Should there be a conflict between the requirements
of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.

Luft- und Raumfahrt - Anforderungen an die Produktqualitätsvorausplanung und das Produktionsteil-Freigabeverfahren

Série aérospatiale - Exigences pour une planification avancée de la qualité produit et un processus d’approbation des pièces de production

Aeronavtika - Zahteve za napredno načrtovanje kakovosti izdelkov in proces odobravanja proizvodnih delov

Ta standard določa zahteve za izvajanje in dokumentiranje naprednega načrtovanja kakovosti izdelkov (APQP) ter procesa odobravanja proizvodnih delov (PPAP). Napredno načrtovanje kakovosti izdelkov temelji na konceptualnih potrebah po izdelkih in zajema opredelitev izdelkov, načrtovanje proizvodnje, validacijo izdelkov in postopkov (npr. PPAP), uporabo izdelkov ter storitev po dostavi. Ta standard upošteva in uporablja zahteve standardov EN 9100, EN 9102, EN 9103 ter EN 9110.
Zahteve iz tega standarda dopolnjujejo (niso alternativna možnost) pogodbene in ustrezne zakonske ter regulativne zahteve. V primeru neskladnosti med zahtevami iz tega standarda in ustreznimi zakonskimi ali regulativnimi zahtevami imajo prednost ustrezne zakonske ali regulativne zahteve.

General Information

Status
Published
Publication Date
30-Oct-2018
Withdrawal Date
29-Apr-2019
ICS
03.120.10 - Quality management and quality assurance
49.020 - Aircraft and space vehicles in general
Technical Committee
ASD-STAN - Aerospace
Drafting Committee
ASD-STAN/D 6/S 1 - EAQG European Aerospace Quality Group
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
31-Oct-2018
Completion Date
31-Oct-2018
Ref Project
SIST EN 9145:2019 - Aerospace series - Requirements for Advanced Product Quality Planning and Production Part Approval Process

Buy Standard

EN 9145:2019 - BARVEEN 9145:2019 - BARVE
PreviousNext
Standard
EN 9145:2019 - BARVE
English language
34 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 9145:2019
01-januar-2019
$HURQDYWLND=DKWHYH]DQDSUHGQRQDþUWRYDQMHNDNRYRVWLL]GHONRYLQSURFHV
RGREUDYDQMDSURL]YRGQLKGHORY
Aerospace series - Requirements for Advanced Product Quality Planning and Production
Part Approval Process
Luft- und Raumfahrt - Anforderungen an die Produktqualitätsvorausplanung und das
Produktionsteil-Freigabeverfahren
Série aérospatiale - Exigences pour une planification avancée de la qualité produit et un
processus d’approbation des pièces de production
Ta slovenski standard je istoveten z: EN 9145:2018
ICS:
03.120.01 Kakovost na splošno Quality in general
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN 9145:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 9145:2019

---------------------- Page: 2 ----------------------

SIST EN 9145:2019


EN 9145
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2018
EUROPÄISCHE NORM
ICS 03.120.10; 49.020
English Version

Aerospace series - Requirements for Advanced Product
Quality Planning and Production Part Approval Process
Série aérospatiale - Exigences pour une planification Luft- und Raumfahrt - Anforderungen an die
avancée de la qualité produit et un processus Produktqualitätsvorausplanung und das
d'approbation des pièces de production Produktionsteil-Freigabeverfahren
This European Standard was approved by CEN on 28 August 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 9145:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 9145:2019
EN 9145:2018 (E)
Contents
Page
Rationale . 4
Foreword . 4
0 Introduction . 5
0.1 General . 5
0.2 Application . 6
1 Scope . 7
1.1 Purpose . 7
1.2 Convention . 7
2 References . 7
3 Terms and definitions . 8
4 Advanced product quality planning requirements . 13
4.1 General requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 9102:2024(Main)
Aerospace series - Quality systems - First article inspection requirements
SIST EN 9102:2024

1.1   General
This document establishes the requirements for performing and documenting FAI. It is emphasized the requirements specified in this document are complementary (not alternative) to customer and applicable statutory and regulatory requirements.
1.2   Purpose
The primary purpose of FAI is to verify and validate product realization processes are capable of producing characteristics that meet engineering and design requirements. A well-planned and executed FAI by a multi-disciplinary team (e.g. members from responsible functions) provides objective evidence the manufacturer’s processes can produce compliant product; having effectively understood and incorporated the associated requirements.
NOTE   A FAI is not a product acceptance document. While interrelated, FAI and product acceptance are separate activities. The focus of FAI is verification of production processes via assessment of product. FAI and supporting documentation do not provide assurance regarding conformance for product acceptance purposes; neither does the lack of a FAI necessarily imply product is nonconforming to engineering and design requirements.
FAI will:
-   provide confidence, through objective evidence, the product realization processes are capable of producing conforming product;
-   demonstrate the manufacturers and processors of the product have an understanding of the associated requirements;
-   provide assurance of product conformance at the start of production and after changes, as outlined in this document.
A FAI is intended to:
-   mitigate risks associated with production startup and process changes;
-   reduce future escapes;
-   help ensure product safety;
-   improve quality, delivery, and customer satisfaction;
-   reduce costs and production delays associated with product nonconformances;
-   identify product realization processes not capable of producing conforming characteristics and initiate and/or validate associated corrective actions.
-
1.3   Application
This document applies to organizations and their suppliers responsible for product realization processes that produce the design characteristics of the product. The organization shall flow down the requirements of this document to suppliers who produce design characteristics.
This document also applies to suppliers performing special process(es). A certificate of conformance (CoC) provided by processors attests to satisfying the requirements. External suppliers providing special process(es) can satisfy this document's requirements by either:
-   documenting the design characteristics and associated results on a first article inspection report (FAIR); or
-   documenting the design characteristics and associated results on a detailed CoC.
This document applies to assemblies, sub-assemblies, and detail parts including castings, forgings, and modifications to standard catalogue or commercial-off-the-shelf (COTS) items. Each of these items have a separate FAI.
Unless contractually required, this document does not apply to:
-   development and prototype parts that are not considered as part of the first production run;
-   procured standard catalogue item, COTS, or deliverable software. When these items are included in an assembly, they shall be documented in the index of part numbers in an assembly FAIR.
1.4   Informative
If there is a conflict between the requirements of this document, and customer or applicable statutory/regulatory requirements, the latter takes precedence.
In this document, the following verbal forms are used:
-   "shall" indicates a requirement;
-   "should" indicates a recommendation;
-   "may" indicates a permission;
-   "can" indicates a possibility or a capability.
Information marked as "NOTE" is for guidance in understanding or clarifying the associated requirement .

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9104-1:2023(Main)
Aerospace series - Quality management systems - Part 1: Requirements for Certification of aviation, space, and defense
SIST EN 9104-1:2024

This document defines the industry-accepted requirements for the ICOP scheme, which provides confidence to ASD customers, that organizations with certification of their QMS, issued by accredited CBs, meet applicable AQMS standard requirements. The requirements in this document are applicable to all participants in the ICOP scheme. If there is a conflict between the requirements of this document, and customer or applicable statutory/regulatory requirements, the latter takes precedence.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9104-3:2023(Main)
Aerospace series - Quality management systems - Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication
SIST EN 9104-3:2024

This document defines the minimum requirements for auditors, CBs, auditor authentication bodies (AABs), training provider approval bodies (TPABs), and training providers (TPs) who participate in the IAQG industry controlled other party (ICOP) scheme. The requirements in this document supplement those defined within the EN 9104-001, EN 9104-002, EN ISO/IEC 17021-1, and EN ISO/IEC 17021-3 standards.
Data protection for the parties subject to this document and other relevant requirements of the ICOP scheme are managed via bi-lateral contracts between the joint controllers of the data.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9103:2023(Main)
Aerospace series - Quality management systems - Variation management of key characteristics
SIST EN 9103:2024

1.1   General
This document is primarily intended to apply to new parts and products intended to be produced in an on-going production phase but can also be applied to parts currently in production (e.g., manufacturing, maintenance). This document is applicable to all production processes that influence the variation of KCs, as well as maintenance and service processes in which KCs are identified. It applies to organizations for assemblies and all levels of parts within an assembly, down to the basic materials including castings and forgings, and to organizations that are responsible for producing the design characteristics of the product.
The variation control process begins with product definition, typically stated in the design documentation (e.g., digital model, engineering drawing, specification) which identifies KCs, and leads to a variation management process for those KCs. This process may also be used for producer-identified KCs (e.g., process KCs, additional/substitute product KCs).
Producers and their subcontractors are responsible for flow down of the standard requirements to those external providers, who produce design characteristics and provide production and service provisions, to ensure that KCs conform to the customer’s requirements.
1.2   Purpose
This document is designed to drive the improvement of manufacturing and maintenance processes through adequate planning and effective management of KC variation. This focus is intended to improve uniformity (less variation or minimum variation of product KCs) and acceptance probability of the end-product.
NOTE   Control of a product or process KC per this document does not constitute, nor imply acceptance of the resulting product. If variation management, under this document, is to be part of an acceptance decision, the requirements need to be specified in the applicable product acceptance plan or contract.
1.3   Convention
The following conventions are used in this document:
-   "shall" indicates a requirement;
-   "should" indicates a recommendation;
-   "may" indicates a permission; and
-   "can" indicates a possibility or a capability.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9101:2023(Main)
Aerospace series - Quality management systems - Requirements for conducting audits of aviation, space, and defence quality management Systems
SIST EN 9101:2024

1.1   General
This document defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the EN 9100-series standards, the organization’s QMS documentation, and customer and statutory/regulatory requirements.
The requirements in this document are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e. ISO/IEC 17000:2020, ISO/IEC 17021 1). When there is conflict with these standards, the requirements of this document take precedence.
NOTE 1   In this document, the term “EN 9100-series standards” comprises the EN 9100, EN 9110, and EN 9120 standards; developed by the IAQG and published by various national standards bodies.
NOTE 2   In addition to this document, the IAQG publishes deployment support material on the IAQG website (see http://www.iaqg.org) that can be used by audit teams, when executing the audit process.
1.2   Application
This document is intended to be used for audits of EN 9100-series standards by Certification Bodies (CBs) for certification of organizations, under the auspices of the ASD industry certification scheme [also known as the Industry Controlled Other Party (ICOP) scheme]. The ICOP scheme requirements are defined in the EN 9104-series standards (i.e. FprEN 9104-1, prEN 9104-2, EN 9104 3).
NOTE   Relevant parts of this document can also be used by an organization in support of internal audits (1st party) and external audits at suppliers (2nd party).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9114:2022(Main)
Aerospace series - Quality systems - Direct Ship - Guidance for aerospace companies
SIST EN 9114:2023

1.1   General
This document is limited to the aerospace industry, where an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s quality system directly to a customer. The direct ship process is not required or applicable to standard parts or military parts. In this process, the approved manufacturer is responsible for assurance that the article conforms to type design information.
1.2   Purpose
This document provides guidance to approved manufacturers, their suppliers, and customers when an approved manufacturer requests a supplier to ship an article against the approved manufacturer’s purchase document directly to a customer, commonly known as “Direct Ship”.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9131:2020(Main)
Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation
SIST EN 9131:2020

1.1 Application
This standard defines the common nonconformity data definition and documentation that shall be exchanged between an internal/external supplier or sub-tier supplier, and the customer when informing about a nonconformity requiring formal decision. The requirements are applicable, partly or totally, when reporting a product nonconformity to the owner or operator, as user of the end item (e.g., engine, aircraft, spacecraft, helicopter), if specified by contract.
Reporting of nonconformity data, either electronically or conventionally on paper, is subject to the terms and conditions of the contract. This also includes, where applicable, data access under export control regulations.
1.2 Purpose
The process of exchanging, coordinating, and approving nonconformity data via concession or product quality escape varies with the multiple relationships and agreements among all parties concerned. The information provided by this standard forms architecture for submitting and managing data that allows for concise and accurate communication using various documented methods. The main objective of this standard is to provide the definition of a data set that can be integrated into any form of communication (e.g., electronic data interchange, submission of conventional paper forms).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9130:2020(Main)
Aerospace series - Quality systems - Record retention
SIST EN 9130:2020

1.1 General
This document provides requirements and guidance for the retention, storage, retrieval and disposal of records for the international aviation, space and defense industry.
1.2 Applicability
1.2.1 This document is applicable to all documents and data records, on current and earlier products, produced using current and previous business agreements and applicable statutory and regulatory requirements.
1.2.2 Documents should be interpreted in the broadest possible sense to include all records, data and information, in paper or in electronic form or on film, including external providers working on own behalf.
1.2.3 Some documents may be retained electronically. The form in which documents are to be retained varies from one jurisdiction to another and varies depending on the document involved. Some countries prescribe that certain documents be retained in their original form as a hardcopy (e.g. board minutes, documents under seal, trust documents and original documents that are subject to specific legal requirements…).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9138:2019(Main)
Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements
SIST EN 9138:2020

1.1   Purpose
This European standard establishes requirements when implementing statistical product acceptance methods to meet defined risk requirements. This standard also establishes the minimum content required to be covered in an organization’s documented procedures that govern their application of statistical product acceptance methods.
These general requirements and documented procedures apply the requirements of the EN 9100/EN 9110/EN 9120 quality management system standards, in addition to establishing requirements for retrievability, safety/critical characteristics, and quality parameters that protect the customer.
1.2   Application
This standard is applicable when invoked in a purchasing contract or specification, contractual document, customer agreement, or adopted by the organization. The purchase contract/agreement may or may not identify the appropriate EN 9138 clause(s) to be applied by the organization. All statistical methods of product acceptance require the use of Clause 4 and Clause 5.
To accept product produced:
- by individual lots, see Clause 6;
- under switching rules, see Clause 7;
- under process controls, see Clause 8; and
- by continuous sampling or special case methods, see Clause 9.

  • Standard
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 9107:2018(Main)
Aerospace series - Quality systems - Direct Delivery Authorization - Guidance for Aerospace Companies
SIST EN 9107:2019

1.1   General
Limited to the commercial aerospace industry where a request is made for a PO to have Direct Delivery Authorization (DDA), which includes an Appropriate Arrangement (AA) between the PO and the Design Organisation (DO). In this process the DO is responsible for ensuring the continuous updating of design and airworthiness data to the PO, whilst the PO is responsible for assurance that the manufactured article conforms to approved design and airworthiness data. The PO is responsible to provide airworthiness release documentation.
1.2   Purpose
This document provides guidance to a PO and DO on how to comply with the DDA, including AA requirements per the applicable documents referenced in Clause 2 (see Figure 1).
(...)

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day