EN 2451:2019

Aerospace series - Steel 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Forgings - De ≤ 40 mm

This document specifies the requirements relating to:
Steel 31Ni10
1 230 MPa ≤ Rm ≤ 1 420 MPa
Forgings
De ≤ 40 mm
for aerospace applications.
ASD-STAN designation: FE-PL73.

Luft- und Raumfahrt - Stahl 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Schmiedestücke - De ≤ 40 mm

Dieses Dokument legt die Anforderungen an:
Stahl 31Ni10
1 230 MPa ≤ Rm ≤ 1 420 MPa
Schmiedestücke
De ≤ 40 mm
für Anwendungen in der Luft  und Raumfahrt fest.
ASD STAN Bezeichnung: FE PL73.

Série aérospatiale - Acier 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Pièces forgées ou matricées - De ≤ 40 mm

Le présent document spécifie les exigences relatives à :
Acier 31Ni10 1 230 MPa ≤ Rm ≤ 1 420 MPa
Pièces forgées ou matricées
De ≤ 40 mm
pour applications aérospatiales.
Désignation ASD-STAN : FE-PL73.

Aeronavtika - Jeklo 31Ni10 - 1230 MPa ≤ Rm ≤ 1420 MPa - Izkovki - De ≤ 40 mm

Ta dokument določa zahteve, ki se navezujejo na: jeklo 31Ni10, 1230 MPa ≤ Rm ≤ 1420 MPa, izkovki, De ≤ 40 mm, za uporabo v aeronavtiki. Oznaka ASD-STAN: FE-PL73.

General Information

• Status: Published
• Publication Date: 03-Dec-2019
• Withdrawal Date: 29-Jun-2020
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 04-Dec-2019
• Completion Date: 04-Dec-2019
• Ref Project: SIST EN 2451:2020 - Aerospace series - Steel 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Forgings - De ≤ 40 mm

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2451:2020
01-februar-2020
Aeronavtika - Jeklo 31Ni10 - 1230 MPa ≤ Rm ≤ 1420 MPa - Izkovki - De ≤ 40 mm
Aerospace series - Steel 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Forgings - De ≤ 40
mm
Luft- und Raumfahrt - Stahl 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Gesenk- und
Freiformschmiedestücke - De ≤ 40 mm
Série aérospatiale - Acier 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420 MPa - Pièces forgées ou
matricées - De ≤ 40 mm
Ta slovenski standard je istoveten z: EN 2451:2019
ICS:
49.025.10 Jekla Steels
77.140.85 Železni in jekleni kovani Iron and steel forgings
izdelki
SIST EN 2451:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2451:2020

---------------------- Page: 2 ----------------------
SIST EN 2451:2020


EN 2451
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2019
EUROPÄISCHE NORM
ICS 49.025.10
English Version

Aerospace series - Steel 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 420
MPa - Forgings - De ≤ 40 mm

Série aérospatiale - Acier 31Ni10 - 1 230 MPa ≤ Rm ≤ 1 Luft- und Raumfahrt - Stahl 31Ni10 - 1 230 MPa ≤ Rm ≤
1 420 MPa - Gesenk- und Freiformschmiedestücke - De
420 MPa - Pièces forgées ou matricées - De ≤ 40 mm
≤ 40 mm
This European Standard was approved by CEN on 4 February 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2451:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2451:2020
EN 2451:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8

2

---------------------- Page: 4 ----------------------
SIST EN 2451:2020
EN 2451:2019 (E)
European foreword
This document (EN 2451:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be
withdrawn at the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for
...