Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity

This European Standard specifies the requirements and test procedures for 360° visibility of sit-on self-propelled industrial counterbalance trucks and rough terrain masted trucks (herein referred to as trucks) with a capacity ≤ 10 000 kg in accordance with ISO 5053 1 and it is intended to be used in conjunction with FprEN 16842-1.
Where specific requirements in this part are modified from the general requirements in FprEN 16842-1, the requirements of this part are truck specific and to be used for sit-on self-propelled industrial counterbalance trucks and rough terrain masted trucks with a capacity ≤ 10 000 kg.
This part of EN 16842 deals with all significant hazards, hazardous situations or hazardous events relevant to the visibility of the operator for applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil 2: Gegengewichtstapler mit Fahrersitz und geländegängige Stapler mit Mast bis zu und einschließlich einer Nenntragfähigkeit von 10 000 kg

Diese Europäische Norm legt die Anforderungen und Prüfverfahren für die Rundumsicht (360°) von motorkraftbetriebenen Gegengewichtstaplern mit Fahrersitz und geländegängigen Staplern mit Mast (nachfolgend als „Flurförderzeuge“ bezeichnet) mit einer Nenntragfähigkeit ≤ 10 000 kg in Übereinstimmung mit ISO 5053 1 fest und ist in Verbindung mit EN 16842 1 anzuwenden.
Wenn spezifische Anforderungen in diesem Teil von den allgemeinen Anforderungen in EN 16842 1 abweichen, sind die Anforderungen in diesem Teil für das Flurförderzeug spezifisch und für motorkraftbetriebene Gegengewichtstapler mit Fahrersitz und geländegängige Stapler mit Mast mit einer Nenntragfähigkeit ≤ 10 000 kg anzuwenden.
Dieser Teil von EN 16842 behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse, die für die Sichtverhältnisse des Bedieners bei vorgesehener Nutzung der betreffenden Maschinen unter normalen Umständen durch den Hersteller vorhersehbaren Fehlanwendungen relevant sind.

Chariots de manutention automoteurs - Visibilité - Méthodes d'essai et vérification - Partie 2 : Chariots en porte-à-faux à conducteur assis et chariots tout terrain à mât ayant une capacité jusqu'à 10 000 kg inclus

La présente Norme européenne spécifie les prescriptions et les modes opératoires pour la visibilité sur 360° des chariots de manutention automoteurs en porte-à-faux à conducteur assis et des chariots tout-terrain à mât (ci-après désignés chariots) ayant une capacité ≤ 10 000 kg conformes à l'ISO 5053-1, et est destinée à être utilisée conjointement avec l’EN 16842 1.
Lorsque des prescriptions spécifiques de la présente partie sont modifiées par rapport aux prescriptions générales de l’EN 16842 1, les prescriptions de la présente partie sont spécifiques au chariot et sont à utiliser pour les chariots de manutention automoteurs en porte-à-faux à conducteur assis et les chariots tout-terrain à mât ayant une capacité ≤ 10 000 kg.
La présente partie de l'EN 16842 traite de tous les phénomènes dangereux, situations dangereuses ou événements dangereux significatifs relatifs à la visibilité du conducteur pour les machines concernées lorsqu'elles sont utilisées comme prévu et dans des conditions de mauvaise utilisation raisonnablement prévisible par le fabricant.

Vozila za talni transport - Gnana vozila za talni transport - Vidno polje voznika - Preskusna metoda in preverjanje - 2. del: Čelni viličarji, na katerih voznik sedi, in terenska vozila z nosilnostjo do vključno 10 000 kg

Ta evropski standard določa zahteve in preskusne postopke za 360-stopinjsko vidno polje voznika pri čelnih viličarjih, na katerih voznik sedi, ter terenskih vozilih z nosilnostjo ≤ 10.000 kg v skladu s standardom ISO/DIS 5053 1 in bi se ga naj bralo skupaj s standardom EN 16842-1. Posebne zahteve v tem delu standarda imajo prednost pred splošnimi zahtevami iz standarda EN 16842-1.

General Information

Status
Published
Publication Date
29-May-2018
Withdrawal Date
29-Nov-2018
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2023
Completion Date
02-Dec-2023

Buy Standard

Standard
EN 16842-2:2018
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 16842-2:2018
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 16842-2:2015 - BARVE
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16842-2:2018
01-oktober-2018
Vozila za talni transport - Gnana vozila za talni transport - Vidno polje voznika -
Preskusna metoda in preverjanje - 2. del: Čelni viličarji, na katerih voznik sedi, in
terenska vozila z nosilnostjo do vključno 10 000 kg
Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on
counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg
capacity
Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Prüfverfahren und Verifikation - Teil
2: Gegengewichtstapler mit Fahrersitz und geländegängige Stapler mit Mast bis zu und
einschließlich einer Nenntragfähigkeit von 10 000 kg
Chariots de manutention automoteurs - Visibilité - Méthodes d'essai et vérification -
Partie 2 : Chariots en porte-à-faux à conducteur assis et chariots tout terrain à mât ayant
une capacité jusqu'à 10 000 kg inclus
Ta slovenski standard je istoveten z: EN 16842-2:2018
ICS:
53.060 Industrijski tovornjaki Industrial trucks
SIST EN 16842-2:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16842-2:2018

---------------------- Page: 2 ----------------------
SIST EN 16842-2:2018


EN 16842-2
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2018
EUROPÄISCHE NORM
ICS 53.060
English Version

Powered industrial trucks - Visibility - Test methods and
verification - Part 2: Sit-on counterbalance trucks and
rough terrain masted trucks up to and including 10 000 kg
capacity
Chariots de manutention automoteurs - Visibilité - Kraftbetriebene Flurförderzeuge - Sichtverhältnisse -
Méthodes d'essai et vérification - Partie 2 : Chariots en Testmethoden zur Verifikation - Teil 2:
porte-à-faux à conducteur assis et chariots tout terrain Gegengewichtstapler mit Fahrersitz und
à mât ayant une capacité jusqu'à 10 000 kg inclus geländegängige Stapler mit Mast bis zu und
einschließlich einer Nenntragfähigkeit von 10 000 kg
This European Standard was approved by CEN on 9 July 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16842-2:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16842-2:2018
EN 16842-2:2018 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Truck configuration . 6
4.1 General . 6
4.2 Fork arm dimensions .
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Testmethoden zur Verifikation - Teil 2: Gegengewichtstapler mit Fahrersitz und geländegängige Stapler mit Mast bis zu und einschließlich einer Nenntragfähigkeit von 10 000 kgChariots de manutention - Visibilité - Méthode d'essai pour la vérification - Partie 2 : Chariots en porte-à-faux à conducteur assis et chariots tout terrain à mât ayant une capacité jusqu'à 10 000 kg inclusPowered industrial trucks - Visibility - Test method for verification - Part 2: Sit-on counter balanced trucks and rough terrain masted trucks up to and including 10 000 kg capacity53.060Industrijski tovornjakiIndustrial trucksICS:Ta slovenski standard je istoveten z:EN 16842-2:2018SIST EN 16842-2:2018en,fr,de01-oktober-2018SIST EN 16842-2:2018SLOVENSKI
STANDARD



SIST EN 16842-2:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16842-2
May
t r s z ICS
w uä r x r English Version
Powered industrial trucks æ Visibility æ Test methods and verification æ Part
tã Sitæon counterbalance trucks and rough terrain masted trucks up to and including
s r
r r r kg capacity Chariots de manutention automoteurs æ Visibilitß æ Mßthodes d 5essai et vßrification æ Partie
t ã Chariots en porteæàæfaux à conducteur assis et chariots tout terrain à mât ayant une capacitß jusqu 5à
s r
r r r kg inclus
Kraftbetriebene Flurförderzeuge æ Sichtverhältnisse æ Testmethoden zur Verifikation æ Teil
tã Gegengewichtstapler mit Fahrersitz und geländegängige Stapler mit Mast bis zu und einschließlich einer Nenntragfähigkeit von
s r
r r r kgThis European Standard was approved by CEN on
{ July
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x z v tæ tã t r s z ESIST EN 16842-2:2018



EN 16842-2:2018 (E) 2 Contents Page European foreword . 3 Introduction . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Truck configuration . 6 4.1 General . 6 4.2 Fork arm dimensions . 6 5 Test equipment . 7 6 Test procedures for direct visibility . 7 6.1 Lighting equipment position . 7 6.2 Test paths for trucks < 10 000 kg . 8 6.3 Measurement procedure .
...

SLOVENSKI STANDARD
oSIST prEN 16842-2:2015
01-maj-2015
9R]LOD]DWDOQLWUDQVSRUW9LGOMLYRVW3UHVNXVQDPHWRGD]DSUHYHUMDQMHGHO
9R]LODVSURWLXWHåMRQDNDWHULKYR]QLNVHGLLQYR]LOD]DQHUDYQHWHUHQHGRYNOMXþQR
NJ]PRJOMLYRVWL
Powered industrial trucks - Visibility - Test method for verification - Part 2: Sit-on counter
balanced trucks and rough terrain masted trucks up to and including 10 000 kg capacity
Kraftbetriebene Flurförderzeuge - Sichtverhältnisse - Testmethoden zur Verifikation - Teil
2: Gegengewichtstapler mit Fahrersitz und geländegängige Stapler mit Mast bis zu und
einschließlich einer Nenntragfähigkeit von 10 000 kg
Chariots de manutention - Visibilité - Méthode d'essai pour la vérification - Partie 2 :
Chariots en porte-à-faux à conducteur assis et chariots tout terrain à mât ayant une
capacité jusqu'à 10 000 kg inclus
Ta slovenski standard je istoveten z: prEN 16842-2
ICS:
53.060 Industrijski tovornjaki Industrial trucks
oSIST prEN 16842-2:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16842-2:2015

---------------------- Page: 2 ----------------------
oSIST prEN 16842-2:2015


EUROPEAN STANDARD
DRAFT
prEN 16842-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2015
ICS 53.060

English Version
Powered industrial trucks - Visibility - Test method for verification
- Part 2: Sit-on counter balanced trucks and rough terrain
masted trucks up to and including 10 000 kg capacity
Chariots de manutention - Visibilité - Méthode d'essai pour Kraftbetriebene Flurförderzeuge - Sichtverhältnisse -
la vérification - Partie 2 : Chariots en porte-à-faux à Testmethoden zur Verifikation - Teil 2: Gegengewichtstapler
conducteur assis et chariots tout terrain à mât ayant une mit Fahrersitz und geländegängige Stapler mit Mast bis zu
capacité jusqu'à 10 000 kg inclus und einschließlich einer Nenntragfähigkeit von 10 000 kg
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 150.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16842-2:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16842-2:2015
prEN 16842-2:2015 (E)
Contents Page
Foreword . 3
Introduction . 5
1 Scope. 6
2 Normative reference(s) . 6
3 Terms and definitions . 6
4 Truck configuration . 6
4.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.