EN ISO 7539-1:2012

Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012)

ISO 7539-1:2012 describes the general considerations that apply when designing and conducting tests to assess susceptibility of metals to stress corrosion.
ISO 7539-1:2012 also gives some general guidance on the selection of test methods.

Korrosion der Metalle und Legierungen - Prüfung der Spannungsrisskorrosion - Teil 1: Allgemeiner Leitfaden für Prüfverfahren (ISO/FDIS 7539-1:2012)

1.1   Dieser Teil von ISO 7539 beschreibt die allgemeinen Betrachtungen, die für die Planung und Durchführung von Prüfungen zur Beurteilung der Anfälligkeit von Metallen gegenüber Spannungsrisskorrosion gelten.
1.2   Dieser Teil von ISO 7539 gibt zusätzlich einen allgemeinen Leitfaden für die Auswahl von Prüfverfahren.
ANMERKUNG 1   Die einzelnen Prüfverfahren sind im Detail nicht in diesem Teil von ISO 7539 behandelt. Diese sind Gegenstand der weiteren Teile von ISO 7539.
ANMERKUNG 2   Dieser Teil von ISO 7539 ist unter den Bedingungen des kathodischen Schutzes anwendbar.

Corrosion des métaux et alliages - Essais de corrosion sous contrainte - Partie 1: Lignes directrices générales relatives aux méthodes d'essai (ISO 7539-1:2012)

L'ISO 7539-1:2012 décrit les considérations générales qui s'appliquent à la mise au point et à la réalisation des essais servant à évaluer la sensibilité des métaux à la corrosion sous contrainte.
L'ISO 7539-1:2012 donne également des directives générales sur la sélection des méthodes d'essais.

Korozija kovin in zlitin - Ugotavljanje pokanja zaradi napetostne korozije - 1. del: Splošna navodila za postopke preskušanja (ISO 7539-1:2012)

Ta del standarda ISO 7539 opisuje splošne pogoje, ki veljajo pri projektiranju in izvajanju preskusov za ocenjevanje dovzetnosti kovin za korozijo. Ta del standarda ISO 7539 podaja tudi splošna navodila za izbiro metod preskušanja.

General Information

• Status: Published
• Publication Date: 18-Dec-2012
• Withdrawal Date: 29-Jun-2013
• ICS: 77.060 - Corrosion of metals
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262/WG 2 - Hot dip galvanized coatings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Dec-2012
• Completion Date: 19-Dec-2012
• Ref Project: SIST EN ISO 7539-1:2014 - Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012)

Relations

• Replaces: EN ISO 7539-1:1995 - Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:1987)
• Effective Date: 13-May-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7539-1:2014
01-julij-2014
1DGRPHãþD
SIST EN ISO 7539-1:1999
Korozija kovin in zlitin - Ugotavljanje pokanja zaradi napetostne korozije - 1. del:
Splošna navodila za postopke preskušanja (ISO 7539-1:2012)
Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on
testing procedures (ISO 7539-1:2012)
Korrosion der Metalle und Legierungen - Prüfung der Spannungsrisskorrosion - Teil 1:
Allgemeiner Leitfaden für Prüfverfahren (ISO 7539-1:2012)
Corrosion des métaux et alliages - Essais de corrosion sous contrainte - Partie 1: Lignes
directrices générales relatives aux méthodes d'essai (ISO 7539-1:2012)
Ta slovenski standard je istoveten z: EN ISO 7539-1:2012
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 7539-1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7539-1:2014

---------------------- Page: 2 ----------------------

SIST EN ISO 7539-1:2014


EUROPEAN STANDARD
EN ISO 7539-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2012
ICS 77.060 Supersedes EN ISO 7539-1:1995
English Version
Corrosion of metals and alloys - Stress corrosion testing - Part
1: General guidance on testing procedures (ISO 7539-1:2012)
Corrosion des métaux et alliages - Essais de corrosion Korrosion der Metalle und Legierungen - Prüfung der
sous contrainte - Partie 1: Lignes directrices générales Spannungsrisskorrosion - Teil 1: Allgemeiner Leitfaden für
relatives aux méthodes d'essai (ISO 7539-1:2012) Prüfverfahren (ISO/FDIS 7539-1:2012)
This European Standard was approved by CEN on 18 December 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7539-1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7539-1:2014
EN ISO 7539-1:2012 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 7539-1:2014
EN ISO 7539-1:2012 (E)
Foreword
This document (EN ISO 7539-1:2012) has been prepared by Technical Committee ISO/TC 156 "Corrosion of
metals and alloys" in collaboration with Technical Committee CEN/TC 262 “Metallic and other inorganic
coatings” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at
the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7539-1:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7539-1:2012 has been approved by CEN as a EN ISO 7539-1:2012 without any modification.

3

---------------------- Page: 5
...