EN 13161:2008

Natural stone test methods - Determination of flexural strength under constant moment

This European Standard specifies a method to determine the flexural strength of natural stones under constant moment. This European Standard contains provision for both an identification test and for a technological test.

Prüfverfahren für Naturstein - Bestimmung der Biegefestigkeit unter Drittellinienlast

Diese Europäische Norm legt das Verfahren zur Bestimmung der Biegefestigkeit von Naturstein unter
Drittellinienlast fest. Diese Europäische Norm enthält Festlegungen für eine Identitätsprüfung und für eine
technologische Prüfung.

Méthodes d'essai pour pierres naturelles - Détermination de la résistance en flexion sous moment constant

La présente Norme européenne spécifie une méthode de détermination de la résistance en flexion des pierres
naturelles sous moment constant. La présente Norme européenne prévoit un essai d’identification et un essai
technologique.

Preskušanje naravnega kamna - Ugotavljanje upogibne trdnosti z obremenitvijo na tretjini razpona

General Information

• Status: Published
• Publication Date: 29-Apr-2008
• Withdrawal Date: 30-Oct-2008
• ICS: 73.020 - Mining and quarrying
• ICS: 91.100.15 - Mineral materials and products
• Technical Committee: CEN/TC 246 - Natural stones
• Drafting Committee: CEN/TC 246/WG 2 - Test methods
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 24-May-2019
• Ref Project: SIST EN 13161:2008 - Natural stone test methods - Determination of flexural strength under constant moment

Relations

• Replaces: EN 13161:2001 - Natural stone test methods - Determination of flexural strength under constant moment
• Effective Date: 22-Dec-2008
• Replaces: EN 13161:2001/AC:2002 - Natural stone test methods - Determination of flexural strength under constant moment
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13161:2008
01-julij-2008
1DGRPHãþD
SIST EN 13161:2002
SIST EN 13161:2002/AC:2003
Preskušanje naravnega kamna - Ugotavljanje upogibne trdnosti z obremenitvijo na
tretjini razpona
Natural stone test methods - Determination of flexural strength under constant moment
Prüfverfahren für Naturstein — Bestimmung der Biegefestigkeit unter Drittellinienlast
Méthodes d´essai pour pierres naturelles — Détermination de la résistance en flexion
sous moment constant
Ta slovenski standard je istoveten z: EN 13161:2008
ICS:
73.020 Rudarstvo in kamnolomsko Mining and quarrying
izkopavanje
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 13161:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 13161
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 73.020; 91.100.15 Supersedes EN 13161:2001
English Version
Natural stone test methods - Determination of flexural strength
under constant moment
Méthodes d'essai pour pierres naturelles - Détermination Prüfverfahren für Naturstein - Bestimmung der
de la résistance en flexion sous moment constant Biegefestigkeit unter Drittellinienlast
This European Standard was approved by CEN on 28 March 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13161:2008: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 13161:2008 (E)
Contents Page
Foreword.3
1 Scope.5
2 Normative references.5
3 Principle.5
4 Symbols.5
5 Apparatus.5
6 Preparation of specimens.6
6.1 Sampling.6
6.2 Test specimens.6
6.2.1 Surface finish.6
6.2.2 Dimensions.7
6.2.3 Limit deviations.7
6.2.4 Planes of anisotropy .7
6.2.5 Conditioning before testing.9
7 Test procedure.
...