EN 1279-2:2018

Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration

This document describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018; or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

Glas im Bauwesen - Mehrscheiben-Isolierglas - Teil 2: Langzeitprüfverfahren und Anforderungen bezüglich Feuchtigkeitsaufnahme

Dieses Dokument beschreibt das Prüfverfahren für die Bestimmung des Feuchtigkeitsaufnahmefaktors und legt die Anforderungen an die Grenzwerte für Mehrscheiben-Isoliergläser fest, die
a)   in Übereinstimmung mit EN 1279 1:2018 und nach EN 1279 6:2018 gefertigt wurden oder
b)   gefertigt wurden, um zu zeigen, dass die Komponenten (z. B. Randverbund oder Abstandhalter) es zulassen, dass das Mehrscheiben-Isolierglas mit den Anforderungen in EN 1279 1:2018, Abschnitt 6, übereinstimmt.

Verre dans la construction - Vitrage isolant - Partie 2 : Méthode d'essai de longue durée et exigences en matière de pénétration d'humidité

Le présent document décrit la méthode d'essai pour la détermination de l'indice de pénétration d'humidité et spécifie les exigences relatives aux valeurs limites pour les vitrages isolants produits
a)   conformément à l'EN 1279-1:2018 et à l'EN 1279-6:2018 ; ou
b)   dans le but de démontrer que des composants (par exemple, joints périphériques ou espaceurs) permettront au vitrage isolant d'être conforme aux exigences de l'EN 1279-1:2018, Article 6.

Steklo v gradbeništvu - Izolacijsko steklo - 2. del: Dolgoročna preskusna metoda ter zahteve za penetracijo vlage

Ta evropski standard opisuje preskusno metodo za ugotavljanje indeksa penetracije vlage in določa zahteve za mejne vrednosti za izolacijsko steklo, izdelano
a) v skladu s standardom prEN 1279-1:2015 in prEN 1279-6:2015 ali
b) za dokazovanje, da komponente (npr. robna tesnila ali distančniki) steklu omogočajo skladnost z zahtevami, opredeljenimi v točki 6 standarda prEN 1279-1:2015.

General Information

• Status: Published
• Publication Date: 24-Jul-2018
• Withdrawal Date: 30-Jan-2019
• ICS: 81.040.20 - Glass in building
• ICS: 91.100.99 - Other construction materials
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 4 - Insulating glass units
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 03-Mar-2024
• Completion Date: 03-Mar-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 88/609/EEC - Limitation of emissions of certain pollutants into the air from large combustion plants
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Mandate: M/135_AM1 - First amendment to mandate M/135 - Mandate to CEN/CENELEC concerning the execution of standardisation work for harmonised standards on glass
• Ref Project: SIST EN 1279-2:2018 - Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration

Relations

• Replaces: EN 1279-2:2002 - Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glas im Bauwesen - Mehrscheiben-Isolierglas - Teil 2: Langzeitprüfverfahren und Anforderungen bezüglich FeuchtigkeitsaufnahmeVerre dans la construction - Vitrage isolant - Partie 2: Méthode d'essai de longue durée et exigences en matière de pénétration d'humiditéGlass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:EN 1279-2:2018SIST EN 1279-2:2018en,fr,de01-oktober-2018SIST EN 1279-2:2018SLOVENSKI
STANDARD



SIST EN 1279-2:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1279-2
July
t r s z ICS
z sä r v rä t r Supersedes EN
s t y {æ tã t r r tEnglish Version
Glass in building æ Insulating glass units æ Part
tã Long term test method and requirements for moisture penetration Verre dans la construction æ Vitrage isolant æ Partie
t ã Méthode d 5essai de longue durée et exigences en matière de pénétration d 5humidité
Glas im Bauwesen æ MehrscheibenæIsolierglas æ Teil
tã Langzeitprüfverfahren und Anforderungen bezüglich Feuchtigkeitsaufnahme This European Standard was approved by CEN on
s x March
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s t y {æ tã t r s z ESIST EN 1279-2:2018



EN 1279-2:2018 (E) 2 Contents Page European foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Symbols and abbreviations . 5 5 Requirements . 6 6 Method of long-term test . 6 6.1 Principle . 6 6.2 Number, description and selection of test specimens . 6 6.3 Climate conditions in cabinet . 7 6.4 Procedure. 9 6.5 Calculation of moisture penetration index I . 9 6.6 Precision of test method . 10 7 Determination of moisture content . 10 7.1 Methods available . 10 7.2 Sampling method .
...