EN 10080:2005

Steel for the reinforcement of concrete - Weldable reinforcing steel - General

This document specifies general requirements and definitions for the performance characteristics of weldable reinforcing steel used for the reinforcement of concrete structures, delivered as finished products in the form of:
-   bars, coils (rod, wire) and de-coiled products;
-   sheets of factory-made machine-welded fabric;
-   lattice girders.
1.2   Steels according to this document have a ribbed, indented or smooth surface.
1.3   This document does not apply to:
-   non-weldable reinforcing steel;
-   galvanized reinforcing steel;
-   epoxy-coated reinforcing steel;
-   corrosion resistant reinforcing steel;
-   prestressing steels (see prEN 10138-1 to -4);
-   indented strip;
-   further processing, e.g. cutting or cutting and bending.

Stahl für die Bewehrung von Beton - Schweißgeeigneter Betonstahl - Allgemeines

1.1 Diese Europäische Norm legt allgemeine Anforderungen und Definitionen für die Leistungsmerkmale
von schweißgeeignetem Betonstahl fest, der für die Bewehrung von Betonbauwerken verwendet und als
Fertigerzeugnis geliefert wird in Form von
.Stäben, Ringen (Walzdraht, Draht) und abgewickelten Erzeugnissen;
.werkmäßig gefertigten maschinell geschweißten Matten;
.Gitterträgern.
1.2 Stähle nach dieser Europäischen Norm haben eine gerippte, profilierte oder glatte Oberfläche.
1.3 Diese Europäische Norm gilt nicht für
.nicht schweißgeeigneten Betonstahl;
.verzinkten Betonstahl;
.epoxibeschichteten Betonstahl;
.korrosionsbeständigen Betonstahl;
.Spannstahl (siehe prEN 10138-1 bis -4);
.profiliertes Band;
.Weiterverarbeitung, z.B. schneiden oder schneiden und biegen.

Aciers pour l'armature du béton - Aciers soudables pour béton armé - Généralités

La présente partie de cette Norme Européenne spécifie les prescriptions générales relatives aux armatures pour béton armé soudables utilisées pour  l'armature des structures en béton dans trois catégories de ductilité A,B et C,livrées sous la forme de: -barres et couronnes(fil,fil machine) pour utilisation directe ou comme éléments pour la fabrication des treillis soudés ou treillis raidisseurs. -panneaux de treillis soudés fabriqués en usine sur machine -treillis raidisseurs;

Jeklo za armiranje betona – Varivo armaturno jeklo - Splošno

General Information

• Status: Published
• Publication Date: 24-May-2005
• Withdrawal Date: 30-May-2009
• ICS: 77.140.15 - Steels for reinforcement of concrete
• ICS: 77.140.60 - Steel bars and rods
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: ECISS/TC 104 - Concrete reinforcing and prestressing steels
• Drafting Committee: ECISS/TC 19/SC 1 - Reinforcing steel not for prestressing
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Start Date: 28-Oct-2009
• Completion Date: 28-Oct-2009
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/115 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on reinforcing and prestress. steel for concrete
• Ref Project: SIST EN 10080:2005 - Steel for the reinforcement of concrete - Weldable reinforcing steel - General

Relations

• Replaces: ENV 10080:1995 - Steel for the reinforcement of concrete weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric
• Effective Date: 22-Dec-2008
• Revised: prEN 10080 - Steel for the reinforcement of concrete - Weldable reinforcing steel - General
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Jeklo za armiranje betona – Varivo armaturno jeklo - SplošnoStahl für die Bewehrung von Beton - Schweißgeeigneter Betonstahl - AllgemeinesAciers pour l'armature du béton - Aciers soudables pour béton armé - GénéralitésSteel for the reinforcement of concrete - Weldable reinforcing steel - General77.140.15Jekla za armiranje betonaSteels for reinforcement of concreteICS:Ta slovenski standard je istoveten z:EN 10080:2005SIST EN 10080:2005en01-september-2005SIST EN 10080:2005SLOVENSKI
STANDARDSIST ENV 10080:19971DGRPHãþD



SIST EN 10080:2005



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10080
May 2005 ICS 77.140.15; 77.140.60; 77.140.65 Supersedes ENV 10080:1995 English version
Steel for the reinforcement of concrete - Weldable reinforcing steel - General
Aciers pour l'armature du béton - Aciers soudables pour béton armé - Généralités
Stahl für die Bewehrung von Beton - Schweißgeeigneter Betonstahl - Allgemeines This European Standard was approved by CEN on 21 April 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10080:2005: ESIST EN 10080:2005



EN 10080:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Symbols.8 5 Designation.10 5.1 Bar, coil and de-coiled product.10 5.2 Welded fabric.10 5.3 Lattice girders.12 6 Steelmaking and manufacturing processes.13 7 Performance characteristics.13 7.1 Weldability and chemical composition.13 7.2 Mechanical properties.14 7.3 Dimensions, mass and tolerances.17 7.4 Bond strength and surface geometry.20 7.5 Verification of performance characteristics.22 8 Evaluation of conformity.
...