Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test

This document specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test in order to determine the short-term tensile welding factor.
A tensile test can be used in conjunction with other tests (e.g. bend, tensile creep, macro) to assess the performance of welded assemblies, made from thermoplastics materials.
The test is applicable to welded semi-finished products made from thermoplastics materials filled or unfilled, but not reinforced, irrespective of the welding process used.

Prüfen von Schweißverbindungen an Halbzeugen aus thermoplastischen Kunststoffen - Teil 2: Zugversuch

Dieses Dokument legt Maße, Probenahmeverfahren und Vorbereitung der Proben sowie die Durchführungs-bestimmungen für den Zugversuch fest, um den Kurzzeitzug-Schweißfaktor zu bestimmen.
Ein Zugversuch kann in Verbindung mit anderen Prüfungen (z. B. Biegeversuch, Zeitstand-Zugversuch, makroskopische Prüfung) angewendet werden, um das Betriebsverhalten von Schweißverbindungen aus thermoplastischen Kunststoffen zu beurteilen.
Der Zugversuch ist unabhängig vom angewendeten Schweißverfahren anwendbar auf geschweißte Halbzeuge, die aus gefüllten oder ungefüllten, nicht aber aus verstärkten thermoplastischen Kunststoffen bestehen.

Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 2 : Essai de traction

Le présent document spécifie les dimensions, la méthode d'échantillonnage et la préparation des éprouvettes, ainsi que les conditions pour effectuer l'essai de traction afin de déterminer le facteur de soudage à court terme en traction.
Un essai de traction peut être utilisé en combinaison avec d'autres essais (par exemple : essai de pliage, essai de fluage en traction, examen macrographique, etc.) pour évaluer les performances des assemblages soudés en matières thermoplastiques.
L’essai est applicable à des produits semi-finis soudés composés de matières thermoplastiques chargées ou non chargées, mais non renforcées, quel que soit le procédé de soudage utilisé.

Preskušanje zvarjenih spojev plastomernih polizdelkov - 2. del: Trgalni preskus

General Information

Status
Published
Publication Date
26-Jan-2021
Withdrawal Date
30-Jul-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Jan-2021
Due Date
15-Apr-2021
Completion Date
27-Jan-2021

Relations

Buy Standard

Standard
EN 12814-2:2021
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 12814-2:2019
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12814-2:2021
01-marec-2021
Nadomešča:
SIST EN 12814-2:2000
Preskušanje zvarjenih spojev plastomernih polizdelkov - 2. del: Trgalni preskus
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
Prüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 2:
Zugversuch
Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 2 :
Essai de traction
Ta slovenski standard je istoveten z: EN 12814-2:2021
ICS:
25.160.40 Varjeni spoji in vari Welded joints and welds
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN 12814-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12814-2:2021

---------------------- Page: 2 ----------------------
SIST EN 12814-2:2021


EN 12814-2
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2021
EUROPÄISCHE NORM
ICS 25.160.40 Supersedes EN 12814-2:2000
English Version

Testing of welded joints of thermoplastics semi-finished
products - Part 2: Tensile test
Essais des assemblages soudés sur produits semi-finis Prüfen von Schweißverbindungen aus
en thermoplastiques - Partie 2 : Essai de traction thermoplastischen Kunststoffen - Teil 2: Zugversuch
This European Standard was approved by CEN on 20 December 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12814-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12814-2:2021
EN 12814-2:2021 (E)
Contents Page
European foreword .3
1 Scope .4
2 Normative references .4
3 Terms, definitions, symbols and abbreviated terms .4
3.1 Terms and definitions .4
3.2 Symbols and abbreviated terms .4
4 Principle of the test .5
5 Sampling procedures .5
6 Dimensions of test specimens .6
7 Cutting of test specimens .8
8 Mechanical testing .8
9 Test equipment .8
10 Determination of the short-term tensile
...

SLOVENSKI STANDARD
oSIST prEN 12814-2:2019
01-september-2019
Preskušanje zvarjenih spojev plastomernih polizdelkov - 2. del: Trgalni preskus
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
Prüfen von Schweißverbindungen aus thermoplastischen Kunststoffen - Teil 2:
Zugversuch
Essais des assemblages soudés sur produits semi-finis en thermoplastiques - Partie 2 :
Essai de traction
Ta slovenski standard je istoveten z: prEN 12814-2
ICS:
25.160.40 Varjeni spoji in vari Welded joints and welds
83.080.01 Polimerni materiali na Plastics in general
splošno
oSIST prEN 12814-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12814-2:2019

---------------------- Page: 2 ----------------------
oSIST prEN 12814-2:2019


DRAFT
EUROPEAN STANDARD
prEN 12814-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2019
ICS 25.160.40 Will supersede EN 12814-2:2000
English Version

Testing of welded joints of thermoplastics semi-finished
products - Part 2: Tensile test
Essais des assemblages soudés sur produits semi-finis Prüfen von Schweißverbindungen aus
en thermoplastiques - Partie 2 : Essai de traction thermoplastischen Kunststoffen - Teil 2: Zugversuch
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12814-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12814-2:2019
prEN 12814-2:2019 (E)
Contents Page
European foreword .3
1 Scope .4
2 Normative references .4
3 Symbols and designations .4
4 Principle of the test .5
5 Sampling procedures .5
6 Dimensions of test specimens .5
7 Cutting of test specimens .8
8 Mechanical testing .8
9 Test equipment .8
10 Determination of th
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.