Ladders - Part 4: Single or multiple hinge-joint ladders

This document specifies the requirements, tests and marking of hinged combination ladders with one or several hinge joints.
This document is not applicable to hinge-joints of combination and standing ladders as defined by EN 131-1.
This part of the standard is intended to be used in conjunction with EN 131-1, EN 131-2 and EN 131-3.

Leitern - Teil 4: Ein- oder Mehrgelenkleitern

Dieses Dokument legt die Anforderungen, Prüfungen und die Kennzeichnung von Mehrzweckleitern mit einer oder mehreren Gelenkverbindungen fest.
Dieses Dokument gilt nicht für Gelenkverbindungen von Mehrzweck  und Stehleitern nach EN 131 1.
Dieser Teil der Norm gilt in Zusammenhang mit EN 131 1, EN 131 2 und EN 131 3.

Échelles - Partie 4 : Échelles articulées à articulations simple et multiple

Le présent document spécifie les exigences, les essais et le marquage des échelles transformables articulées dotées d’une ou de plusieurs articulations.
Le présent document ne s’applique pas aux articulations des échelles transformables et doubles définies dans l’EN 131-1.
La présente partie de cette norme s’applique conjointement avec l’EN 131-1, l’EN 131-2 et l’EN 131-3.

Lestve - 4. del: Lestve z enim ali več pregibi

General Information

Status
Published
Publication Date
10-Mar-2020
Withdrawal Date
29-Sep-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Mar-2020
Due Date
11-Mar-2020
Completion Date
11-Mar-2020

Relations

Buy Standard

Standard
EN 131-4:2020
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN 131-4:2020
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 131-4:2018
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 131-4:2020
01-junij-2020
Nadomešča:
SIST EN 131-4:2007
Lestve - 4. del: Lestve z enim ali več pregibi
Ladders - Part 4: Single or multiple hinge-joint ladders
Leitern - Teil 4: Ein- oder Mehrgelenkleitern
Echelles - Partie 4 : Echelles articulées à articulations simple et multiple
Ta slovenski standard je istoveten z: EN 131-4:2020
ICS:
97.145 Lestve Ladders
SIST EN 131-4:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 131-4:2020

---------------------- Page: 2 ----------------------
SIST EN 131-4:2020


EN 131-4
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2020
EUROPÄISCHE NORM
ICS 97.145 Supersedes EN 131-4:2007
English Version

Ladders - Part 4: Single or multiple hinge-joint ladders
Échelles - Partie 4 : Échelles articulées à articulations Leitern - Teil 4: Ein- oder Mehrgelenkleitern
simple et multiple
This European Standard was approved by CEN on 22 December 2019.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 18 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.



EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 131-4:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 131-4:2020
EN 131-4:2020 (E)
Content Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Functional dimensions . 7
4.1 General . 7
4.2 Hinged ladders in “platform position” . 7
4.3 Hinged ladders in “stand-off” position . 8
5 Requirements . 8
5.1 General . 8
5.2 Decking component . 8
5.3 Ladder hinged in the longitudinal direction . 8
6 Test methods . 9
6.1 General . 9
6.2 Tes
...

SLOVENSKI STANDARD
SIST EN 131-4:2020
01-junij-2020
Nadomešča:
SIST EN 131-4:2007
Lestve - 4. del: Lestve z enim ali več pregibi
Ladders - Part 4: Single or multiple hinge-joint ladders
Leitern - Teil 4: Ein- oder Mehrgelenkleitern
Echelles - Partie 4 : Echelles articulées à articulations simple et multiple
Ta slovenski standard je istoveten z: EN 131-4:2020
ICS:
97.145 Lestve Ladders
SIST EN 131-4:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 131-4:2020

---------------------- Page: 2 ----------------------
SIST EN 131-4:2020


EN 131-4
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2020
EUROPÄISCHE NORM
ICS 97.145 Supersedes EN 131-4:2007
English Version

Ladders - Part 4: Single or multiple hinge-joint ladders
Échelles - Partie 4 : Échelles articulées à articulations Leitern - Teil 4: Ein- oder Mehrgelenkleitern
simple et multiple
This European Standard was approved by CEN on 22 December 2019.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 18 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.



EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 131-4:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 131-4:2020
EN 131-4:2020 (E)
Content Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Functional dimensions . 7
4.1 General . 7
4.2 Hinged ladders in “platform position” . 7
4.3 Hinged ladders in “stand-off” position . 8
5 Requirements . 8
5.1 General . 8
5.2 Decking component . 8
5.3 Ladder hinged in the longitudinal direction . 8
6 Test methods . 9
6.1 General . 9
6.2 Tes
...

SLOVENSKI STANDARD
oSIST prEN 131-4:2018
01-februar-2018
/HVWYHGHO/HVWYH]HQLPDOLYHþSUHJLEL
Ladders - Part 4: Single or multiple hinge-joint ladders
Leitern - Teil 4: Ein- oder Mehrgelenkleitern
Echelles - Partie 4 : Echelles articulées à articulations simple et multiple
Ta slovenski standard je istoveten z: prEN 131-4
ICS:
97.145 Lestve Ladders
oSIST prEN 131-4:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 131-4:2018

---------------------- Page: 2 ----------------------
oSIST prEN 131-4:2018


DRAFT
EUROPEAN STANDARD
prEN 131-4
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2017
ICS 97.145 Will supersede EN 131-4:2007
English Version

Ladders - Part 4: Single or multiple hinge-joint ladders
Echelles - Partie 4 : Echelles articulées à articulations Leitern - Teil 4: Ein- oder Mehrgelenkleitern
simple et multiple
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 93.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 131-4:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 131-4:2018
prEN 131-4:2017 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Functional dimensions . 7
4.1 Ladders in single, standing and transformable position . 7
4.2 Ladders hinged in “leaning ladder or standing ladder” positions . 7
4.3 Dimension for ladders hinged with b equal at the top and at the bottom of the
2
ladders . 7
4.4 Hinged ladders in “platform position” . 8
4.5 Hinged ladders in “stand-off” position . 9
5 Requirements . 9
5.1 General . 9
5.2 Decking component .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.