Respiratory protective devices - Nomenclature of components

This document specifies the nomenclature for typical components of respiratory protective devices. It does not specify which or how many components are used and where they are located in the apparatus.
The illustrations used are given as examples only for the identification of the different parts and the corresponding terms for facilitating the application. The terms and definitions used are given in EN ISO 16972:2020 and EN 135:1998.
The terms are given in the three official CEN languages.

Atemschutzgeräte - Benennungen von Einzelteilen

Dieses Dokument legt die Nomenklatur für typische Komponenten von Atemschutzgeräten fest. Es legt nicht fest, welche oder wie viele Bauteile verwendet werden und wo sie im Gerät angeordnet sind.
Die verwendeten Abbildungen dienen nur als Beispiele für die Identifizierung der verschiedenen Teile und der entsprechenden Begriffe zur Erleichterung der Anwendung. Die verwendeten Begriffe und Definitionen sind in EN ISO 16972:2020 und EN 135:1998 angegeben.
Die Begriffe sind in den drei offiziellen CEN-Sprachen angegeben.

Appareils de protection respiratoire - Nomenclature des composants

Le présent document spécifie la nomenclature des composants caractéristiques des appareils de protection respiratoire. Il ne spécifie ni quels composants sont utilisés, ni leur nombre et n’indique pas leur emplacement dans l’appareil.
Les dessins figurant dans cette norme sont seulement des exemples destinés à l’identification des différents composants et des termes correspondants pour faciliter l’application. Les termes et définitions utilisés sont donnés dans l’EN ISO 16972:2020 et l’EN 135:1998.
Les termes sont donnés dans les trois langues officielles du CEN.

Oprema za varovanje dihal - Poimenovanje sestavnih delov

General Information

Status
Not Published
Publication Date
26-Mar-2024
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
03-Mar-2023
Due Date
28-Mar-2022
Completion Date
03-Mar-2023

Relations

Buy Standard

Draft
prEN 134:2021
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 134:2021
01-april-2021
Oprema za varovanje dihal - Poimenovanje sestavnih delov
Respiratory protective devices - Nomenclature of components
Atemschutzgeräte - Benennungen von Einzelteilen
Appareils de protection respiratoire - Nomenclature des composants
Ta slovenski standard je istoveten z: prEN 134
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.340.30 Varovalne dihalne naprave Respiratory protective
devices
oSIST prEN 134:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 134:2021

---------------------- Page: 2 ----------------------
oSIST prEN 134:2021


DRAFT
EUROPEAN STANDARD
prEN 134
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2021
ICS 13.340.30 Will supersede EN 134:1998
English Version

Respiratory protective devices - Nomenclature of
components
Appareils de protection respiratoire - Nomenclature Atemschutzgeräte - Benennungen von Einzelteilen
des composants
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 79.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 134:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 134:2021
prEN 134:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
Bibliography . 25

2

---------------------- Page: 4 ----------------------
oSIST prEN 134:2021
prEN 134:2021 (E)
European foreword
This document (prEN 134:2021) has been prepared by Technical Committee CEN/TC 79 “Respiratory
protective devices”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 134:1998.
In comparison with the previous edition, the following technical modifications have been made:
— Keys updated.
3

---------------------- Page: 5 ----------------------
oSIST prEN 134:2021
prEN 134:2021 (E)
1 Scope
This document specifies the nomenclature for typical components of respiratory protective devices. It
does not specify which or how many components are used and where they are located in the apparatus.
The illustrations used are given as examples only for the identification of the different parts and the
corresponding terms for facilitating the application. The terms and definitions used are given in
EN ISO 16972:2020 and EN 135:1998.
The terms are given in the three official CEN langua
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.