Petroleum and natural gas industries - Specific requirements for offshore structures - Part 9: Structural integrity management (ISO 19901-9:2019)

This document specifies principles for the structural integrity management (SIM) of offshore structures subjected to known or foreseeable types of actions.
This document specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries:
—          caissons, free-standing and braced;
—          jackets;
—          monotowers;
—          towers.
This document is applicable to topsides, including but not limited to the main decks, deck legs, topsides modules, crane pedestals, helideck, drilling derrick, skid beams, flare booms, exhaust towers, radio tower, conductor support frames, and lifeboat davits. In addition, it is applicable to compliant bottom founded structures, steel gravity structures, jack-ups, other bottom founded structures and other structures related to offshore structures (e.g. underwater oil storage tanks, bridges and connecting structures), to the extent to which its requirements are relevant.
This document contains requirements for planning and engineering of the following tasks:
a)    integrity management data requirements;
b)    in-service inspection and integrity management of both new and existing structures;
c)    assessment of existing structures;
d)    evaluation of structures for reuse at different locations;
e)    evaluation of structures for their future removal.

Erdöl- und Erdgasindustrie - Spezielle Anforderungen für Offshore-Anlagen - Teil 9: Integritätsmanagement für Konstruktionen (ISO 19901-9:2019)

Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures en mer - Partie 9: Gestion de l'intégrité structurelle (ISO 19901-9:2019)

Le présent document spécifie les principes régissant la gestion de l'intégrité structurelle (SIM) des structures en mer soumises à des types d'actions connus ou prévisibles.
Il spécifie des exigences et fournit des recommandations applicables aux types suivants de structures en mer fixes en acier pour les industries du pétrole et du gaz naturel:
—          caissons, autoportants et ancrés;
—          jaquettes;
—          tours mono;
—          tours.
Le présent document est applicable à la superstructure, y compris, mais sans s'y limiter, les ponts principaux, les jambes de pont, les modules de la superstructure, les socles de grue, le pont hélicoptère, le derrick de forage, les poutres de ripage, les supports de torche, les tours d'évacuation, la tour radio, les ossatures de guidage des tubes conducteurs et les bossoirs des canots de sauvetage. En outre, il est applicable à des structures élastiques prenant appui sur le fond marin, à des structures en acier posées par gravité, à des plates-formes auto-élévatrices, à d'autres structures prenant appui sur le fond marin et à d'autres structures associées aux structures en mer conformes (telles que des citernes sous-marines de stockage de pétrole, des ponts et des structures de connexion) dans la mesure où ses exigences se rapportent à celles-ci.
Le présent document contient des exigences pour la planification et l'ingénierie des tâches suivantes:
a)    les exigences relatives à la gestion de l'intégrité;
b)    l'inspection en service et la gestion de l'intégrité à la fois des nouvelles structures et des structures existantes;
c)    l'évaluation de structures existantes;
d)    l'évaluation de structures en vue d'une réutilisation en des lieux différents;
e)    l'évaluation de structures en vue de leur enlèvement futur.

Industrija za predelavo nafte in zemeljskega plina - Posebne zahteve za naftne ploščadi - 9. del: Celovitost storitev upravljanja (ISO 19901-9:2019)

Ta del standarda ISO 19901 določa inženirske zahteve in priporočila glede procesa celovitosti storitev upravljanja (SIM), ki jih uporablja lastnik za prikaz strukturne ustreznosti za obratovanje obstoječih vrtalnih ploščadi. Ta del standarda ISO 19901 obravnava življenjski cikel ploščadi od koncepta do izločitve iz uporabe in/ali morebitne ponovne uporabe na drugi lokaciji ter se uporablja za:
-   strukturne komponente podstrukture na skladnih na dno pritrjenih naftnih ploščadih, vključno s fiksnimi ploščadmi, skladnimi stolpi, razdelilniki in strukturami, ki se uporabljajo kot del alternativnega energetskega koncepta;
-   strukturne komponente na palubi, ne glede na strukturno obliko, vključno s plavajočimi objekti in dvižnimi ploščadmi.

General Information

Status
Published
Publication Date
10-Sep-2019
Withdrawal Date
30-Mar-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Sep-2019
Due Date
06-Nov-2019
Completion Date
11-Sep-2019

Buy Standard

Standard
EN ISO 19901-9:2019 - BARVE
English language
153 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19901-9:2017 - BARVE
English language
175 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19901-9:2019
01-november-2019
Industrija za predelavo nafte in zemeljskega plina - Posebne zahteve za naftne
ploščadi - 9. del: Celovitost storitev upravljanja (ISO 19901-9:2019)
Petroleum and natural gas industries - Specific requirements for offshore structures -
Part 9: Structural integrity management (ISO 19901-9:2019)
Erdöl- und Erdgasindustrie - Spezielle Anforderungen für Offshore-Anlagen - Teil 9:
Integritätsmanagement für Konstruktionen (ISO 19901-9:2019)
Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures
en mer - Partie 9: Gestion de l'intégrité structurelle (ISO 19901-9:2019)
Ta slovenski standard je istoveten z: EN ISO 19901-9:2019
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
SIST EN ISO 19901-9:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19901-9:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 19901-9:2019


EN ISO 19901-9
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2019
EUROPÄISCHE NORM
ICS 75.180.10
English Version

Petroleum and natural gas industries - Specific
requirements for offshore structures - Part 9: Structural
integrity management (ISO 19901-9:2019)
Industries du pétrole et du gaz naturel - Exigences Erdöl- und Erdgasindustrie - Spezielle Anforderungen
spécifiques relatives aux structures en mer - Partie 9: für Offshore-Anlagen - Teil 9: Integritätsmanagement
Gestion de l'intégrité structurelle (ISO 19901-9:2019) für Konstruktionen (ISO 19901-9:2019)
This European Standard was approved by CEN on 8 June 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19901-9:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19901-9:2019
EN ISO 19901-9:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19901-9:2019
EN ISO 19901-9:2019 (E)
European foreword
This document (EN ISO 19901-9:2019) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries"
in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
En
...

SLOVENSKI STANDARD
oSIST prEN ISO 19901-9:2017
01-julij-2017
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD3RVHEQH]DKWHYH]DQDIWQH
SORãþDGLGHO&HORYLWRVWVWRULWHYXSUDYOMDQMD ,62',6
Petroleum and natural gas industries - Specific requirements for offshore structures -
Part 9: Structural integrity management (ISO/DIS 19901-9:2017)
Erdöl- und Erdgasindustrie - Spezielle Anforderungen für Offshore-Anlagen - Teil 9:
Integritätsmanagement für Konstruktionen (ISO/DIS 19901-9:2017)
Industries du pétrole et du gaz naturel - Exigences spécifiques relatives aux structures
en mer - Partie 9: Gestion de l'intégrité structurelle (ISO/DIS 19901-9:2017)
Ta slovenski standard je istoveten z: prEN ISO 19901-9
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
oSIST prEN ISO 19901-9:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19901-9:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19901-9:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19901-9
ISO/TC 67/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
2017-04-26 2017-07-18
Petroleum and natural gas industries — Specific
requirements for offshore structures —
Part 9:
Structural integrity management
Industries du pétrole et du gaz naturel — Exigences spécifiques relatives aux structures en mer —
Partie 9: Gestion de l’intégrité structurelle
ICS: 75.180.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19901-9:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19901-9:2017
ISO/DIS 19901-9:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19901-9:2017
ISO/DIS 19901-9:2017(E)
Contents
Foreword . vii
Introduction . ix
1 Scope.10
2 Normative references .10
3 Terms and definitions.11
4 Symbols .14
5 Abbreviated terms.16
6 SIM fundamentals .18
6.1 General .18
6.2 Fitness-for-service assessment .19
6.3 Management framework .19
6.4 Performance level.20
6.5 Design .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.