iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 6141:2015/A1:2020

(Amendment)

Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)

Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)

Gasanalyse - Inhalte von Zertifikaten für Kalibriergasgemische (ISO 6141:2015/Amd.1:2020)

[Not available]

Analyse des gaz - Contenu des certificats des mélanges de gaz pour étalonnage - Amendement 1: Liste des références croisées avec le Guide 31:2015 de l'ISO et l'ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)

Analiza plinov - Vsebina certifikatov za kalibracijske plinske zmesi - Dopolnilo A1: Referenčni seznam ISO Vodila 31:2015 in ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)

General Information

Status
Published
Publication Date
18-Feb-2020
Withdrawal Date
30-Aug-2020
ICS
71.040.30 - Chemical reagents
71.040.40 - Chemical analysis
Technical Committee
CEN/TC 238 - Test gases, test pressures and categories of appliances
Drafting Committee
CEN/SS N21 - Gaseous fuels and combustible gas
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Feb-2020
Completion Date
19-Feb-2020
Ref Project
SIST EN ISO 6141:2015/A1:2020 - Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)

Relations

Amends
EN ISO 6141:2015 - Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015)
Effective Date
06-Dec-2017

Buy Standard

EN ISO 6141:2015/A1:2020EN ISO 6141:2015/A1:2020
PreviousNext
Amendment
EN ISO 6141:2015/A1:2020
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6141:2015/A1:2020
01-april-2020
Analiza plinov - Vsebina certifikatov za kalibracijske plinske zmesi - Dopolnilo A1:
Referenčni seznam ISO Vodila 31:2015 in ISO/IEC 17025:2017 (ISO 6141:2015/Amd
1:2020)
Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross
reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd
1:2020)
Gasanalyse - Inhalte von Zertifikaten für Kalibriergasgemische - Änderung 1:
Querverweisliste zum ISO Guide 31:2015 und ISO/IEC 17025:2017 (ISO
6141:2015/Amd 1:2020)
Analyse des gaz - Contenu des certificats des mélanges de gaz pour étalonnage -
Amendement 1: Liste des références croisées avec le Guide 31:2015 de l'ISO et
l'ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 6141:2015/A1:2020
ICS:
71.040.40 Kemijska analiza Chemical analysis
SIST EN ISO 6141:2015/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 6141:2015/A1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 6141:2015/A1:2020


EN ISO 6141:2015/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 71.040.40
English Version

Gas analysis - Contents of certificates for calibration gas
mixtures - Amendment 1: Cross reference list to ISO Guide
31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd
1:2020)
Analyse des gaz - Contenu des certificats des mélanges Gasanalyse - Inhalte von Zertifikaten für
de gaz pour étalonnage - Amendement 1: Liste des Kalibriergasgemische - Änderung 1: Querverweisliste
références croisées avec le Guide 31:2015 de l'ISO et zum ISO Guide 31:2015 und ISO/IEC 17025:2017 (ISO
l'ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020) 6141:2015/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 6141:2015; it was approved by CEN on 27 January 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6141:2015/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 6141:2015/A1:2020
EN ISO 6141:2015/A1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 6141:2015/A1:2020
EN ISO 6141:2015/A1:2020 (E)
European foreword
This document (EN ISO 6141:2015/A1:2020) has been prepared by Technical Committee ISO/TC 158
"Analysis of gases" in collaboration with CCMC.
This Amendment to the European Standard EN ISO 6141:2015 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2020, and
conflicting national standards shall be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzer
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 6142-1:2015(Main)
Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
SIST EN ISO 6142-1:2015

ISO 6142-1:2015 specifies a gravimetric method for the preparation of calibration gas mixtures in cylinders with traceable values for the amount-of-substance fraction (amount fraction) of one or more components. This part of ISO 6142 describes a method for calculating the uncertainty associated with the amount fraction of each component. This uncertainty calculation requires the evaluation of the contributions to the uncertainty due to factors including the weighing process, the purity of the components, the stability of the mixture, and the verification of the final mixture.
ISO 6142-1:2015 is only applicable to mixtures of gaseous or totally vaporized components, which may be introduced into the cylinder in the gaseous or liquid state. Both binary and multi-component gas mixtures (including natural-gas type mixtures) are covered by this part of ISO 6142. Methods for the batch production of more than one mixture in a single process are not included in this part of ISO 6142.
ISO 6142-1:2015 requires estimation of the stability of the mixture for its intended life time (maximum storage life), but it is not for use with components that react with each other unintentionally. This part of ISO 6142 also requires the impurities in each parent gas or liquid used in the preparation of the mixture to be assessed and quantified.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6141:2015(Main)
Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015)
SIST EN ISO 6141:2015

ISO 6141:2015 specifies minimum requirements for the contents of certificates for homogeneous gas mixtures in gas cylinders to be used as calibration gas mixtures. Pure gases, when used as calibration gas mixtures, are also covered by this International Standard. Gases and gas mixtures produced for other purposes are not considered.
The requirements in ISO 6141:2015 deal with the metrological aspects of calibration gas mixtures. Other aspects, such as safety and legislative aspects, are not covered.
Furthermore, it specifies additional information (optional data) recommended for describing a homogeneous gas mixture, supplied under pressure in a cylinder or other container. It does not cover the field of safety-relevant data and related labelling.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6142-1:2015(Main)
Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015)
SIST EN ISO 6142-1:2015

ISO 6142-1:2015 specifies a gravimetric method for the preparation of calibration gas mixtures in cylinders with traceable values for the amount-of-substance fraction (amount fraction) of one or more components. This part of ISO 6142 describes a method for calculating the uncertainty associated with the amount fraction of each component. This uncertainty calculation requires the evaluation of the contributions to the uncertainty due to factors including the weighing process, the purity of the components, the stability of the mixture, and the verification of the final mixture.
ISO 6142-1:2015 is only applicable to mixtures of gaseous or totally vaporized components, which may be introduced into the cylinder in the gaseous or liquid state. Both binary and multi-component gas mixtures (including natural-gas type mixtures) are covered by this part of ISO 6142. Methods for the batch production of more than one mixture in a single process are not included in this part of ISO 6142.
ISO 6142-1:2015 requires estimation of the stability of the mixture for its intended life time (maximum storage life), but it is not for use with components that react with each other unintentionally. This part of ISO 6142 also requires the impurities in each parent gas or liquid used in the preparation of the mixture to be assessed and quantified.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6141:2015(Main)
Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015)
SIST EN ISO 6141:2015

ISO 6141:2015 specifies minimum requirements for the contents of certificates for homogeneous gas mixtures in gas cylinders to be used as calibration gas mixtures. Pure gases, when used as calibration gas mixtures, are also covered by this International Standard. Gases and gas mixtures produced for other purposes are not considered.
The requirements in ISO 6141:2015 deal with the metrological aspects of calibration gas mixtures. Other aspects, such as safety and legislative aspects, are not covered.
Furthermore, it specifies additional information (optional data) recommended for describing a homogeneous gas mixture, supplied under pressure in a cylinder or other container. It does not cover the field of safety-relevant data and related labelling.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2620:2024(Main)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)
kSIST FprEN ISO 2620:2024

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day