EN ISO 15630-1:2019

Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, rods and wire (ISO 15630-1:2019)

This document specifies chemical and mechanical test methods and measurement methods of geometrical characteristics applicable to reinforcing bars, rods and wire for concrete.
This document does not cover the sampling conditions that are dealt with in the product standards.
A list of options for agreement between the parties involved is provided in Annex A.

Stähle für die Bewehrung und das Vorspannen von Beton - Prüfverfahren - Teil 1: Bewehrungsstäbe, Walzdraht und Draht (ISO 15630-1:2019)

Dieser Teil von ISO 15630 legt die für Bewehrungsstäbe, -walzdraht und -draht für Beton in Betracht kommenden Prüfmethoden fest.

Aciers pour l'armature et la précontrainte du béton - Méthodes d'essai - Partie 1: Barres, fils machine et fils pour béton armé (ISO 15630-1:2019)

Le présent document spécifie des méthodes d'essai chimiques et mécaniques et des méthodes de mesure des caractéristiques géométriques applicables aux barres, fils machine et fils pour béton armé.
Le présent document ne couvre pas les conditions d'échantillonnage qui sont spécifiées dans les normes de produit.
Une liste d'options en vue d'un accord entre les parties concernées figure à l'Annexe A.

Jeklo za armiranje in prednapenjanje betona - Metode preskušanja - 1. del: Armaturne palice, drogovi in žica (ISO 15630-1:2019)

Ta dokument določa kemijske in mehanske metode preskušanja ter metode merjenja geometrijskih značilnosti, ki se uporabljajo za armaturne palice, drogove in žico za beton.
Ta dokument ne zajema pogojev vzorčenja, ki so obravnavani v standardih za izdelke.
Seznam možnosti za dogovor med vpletenimi stranmi je podan v dodatku A.

General Information

• Status: Published
• Publication Date: 05-Mar-2019
• Withdrawal Date: 29-Sep-2019
• ICS: 77.140.15 - Steels for reinforcement of concrete
• Technical Committee: ECISS/TC 104 - Concrete reinforcing and prestressing steels
• Drafting Committee: ECISS/TC 104 - Concrete reinforcing and prestressing steels
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 06-Mar-2019
• Completion Date: 06-Mar-2019
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/115 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on reinforcing and prestress. steel for concrete
• Ref Project: SIST EN ISO 15630-1:2019 - Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, rods and wire (ISO 15630-1:2019)

Relations

• Replaces: EN ISO 15630-1:2010 - Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire (ISO 15630-1:2010)
• Effective Date: 19-Oct-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15630-1:2019
01-maj-2019
1DGRPHãþD
SIST EN ISO 15630-1:2011
Jeklo za armiranje in prednapenjanje betona - Metode preskušanja - 1. del:
Armaturne palice, drogovi in žica (ISO 15630-1:2019)
Steel for the reinforcement and prestressing of concrete - Test methods - Part 1:
Reinforcing bars, rods and wire (ISO 15630-1:2019)
Stähle für die Bewehrung und das Vorspannen von Beton - Prüfverfahren - Teil 1:
Bewehrungsstäbe, -walzdraht und -draht (ISO 15630-1:2019)
Aciers pour l'armature et la précontrainte du béton - Méthodes d'essai - Partie 1: Barres,
fils machine et fils pour béton armé (ISO 15630-1:2019)
Ta slovenski standard je istoveten z: EN ISO 15630-1:2019
ICS:
77.140.15 Jekla za armiranje betona Steels for reinforcement of
concrete
SIST EN ISO 15630-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15630-1:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 15630-1:2019


EN ISO 15630-1
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 77.140.15 Supersedes EN ISO 15630-1:2010
English Version

Steel for the reinforcement and prestressing of concrete -
Test methods - Part 1: Reinforcing bars, rods and wire (ISO
15630-1:2019)
Aciers pour l'armature et la précontrainte du béton - Stähle für die Bewehrung und das Vorspannen von
Méthodes d'essai - Partie 1: Barres, fils machine et fils Beton - Prüfverfahren - Teil 1: Bewehrungsstäbe,
pour béton armé (ISO 15630-1:2019) Walzdraht und Draht (ISO 15630-1:2019)
This European Standard was approved by CEN on 26 November 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15630-1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 15630-1:2019
EN ISO 15630-1:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 15630-1:2019
EN ISO 15630-1:2019 (E)
European foreword
This document (EN ISO 15630-1:2019) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee CEN/TC 459 “ECISS - European Committee for Iron and Steel
Standardization” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15630-1:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the Un
...