Powder metallurgy - Vocabulary (ISO 3252:2019)

This document defines terms relating to powder metallurgy. Powder metallurgy is the branch of metallurgy which relates to the manufacture of metallic powders, or of articles made from such powders with or without the addition of non-metallic powders, by the application of forming and sintering processes.

Pulvermetallurgie - Begriffe (ISO 3252:2019)

Dieses Dokument definiert die Begriffe aus dem Gebiet Pulvermetallurgie. Die Pulvermetallurgie ist ein Zweig der Metallurgie, der sich mit der Herstellung metallischer Pulver oder der Herstellung von Teilen, die aus solchen Pulvern mit oder ohne Zusätze nichtmetallischer Pulver durch Formen und Sintern erzeugt werden, beschäftigt.

Métallurgie des poudres - Vocabulaire (ISO 3252:2019)

Le présent document définit des termes relatifs à la métallurgie des poudres. La métallurgie des poudres est la branche de la métallurgie qui a trait à la fabrication de poudres métalliques, ou d'articles fabriqués à partir des dites poudres, avec ou sans addition de poudres non métalliques, par application de procédés de formage et de frittage.

Metalurgija prahov - Slovar (ISO 3252:2019)

Ta dokument določa izraze, povezane z metalurgijo prahov. Metalurgija prahov je veja metalurgije, ki je povezana s proizvodnjo kovinskih prahov ali artiklov, izdelanih iz takih prahov, in sicer z dodatkom nekovinskih prahov ali brez njih, z uporabo procesov oblikovanja in sintranja.

General Information

Status
Withdrawn
Publication Date
24-Sep-2019
Withdrawal Date
21-Mar-2023
Current Stage

Relations

Buy Standard

Standard
EN ISO 3252:2019
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 3252:2019
English language
42 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 3252:2018
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3252:2019
01-december-2019
Nadomešča:
SIST EN ISO 3252:2001
Metalurgija prahov - Slovar (ISO 3252:2019)
Powder metallurgy - Vocabulary (ISO 3252:2019)
Pulvermetallurgie - Begriffe (ISO 3252:2019)
Métallurgie des poudres - Vocabulaire (ISO 3252:2019)
Ta slovenski standard je istoveten z: EN ISO 3252:2019
ICS:
01.040.77 Metalurgija (Slovarji) Metallurgy (Vocabularies)
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 3252:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3252:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 3252:2019


EN ISO 3252
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2019
EUROPÄISCHE NORM
ICS 01.040.77; 77.160 Supersedes EN ISO 3252:2000
English Version

Powder metallurgy - Vocabulary (ISO 3252:2019)
Métallurgie des poudres - Vocabulaire (ISO 3252:2019) Pulvermetallurgie - Begriffe (ISO 3252:2019)
This European Standard was approved by CEN on 9 August 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3252:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 3252:2019
EN ISO 3252:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 3252:2019
EN ISO 3252:2019 (E)
European foreword
This document (EN ISO 3252:2019) has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy" in collaboration with Technical Committee CEN/SS M11 “Powder metallurgy” the
secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3252:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 3252:2019 has been approved by CEN as EN ISO 3252:2019 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 3252:2019

---------------------- Page: 6 ----------------------
SIST EN ISO 3252:2019
INTERNATIONAL ISO
STANDARD 3252
Fifth edition
2019-08
Powder metallurgy — Vocabulary
Métallurgie des poudres — Vocabulaire
Reference number
ISO 3252:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 3252:2019
ISO 3252:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, incl
...

SLOVENSKI STANDARD
SIST EN ISO 3252:2019
01-december-2019
Nadomešča:
SIST EN ISO 3252:2001
Metalurgija prahov - Slovar (ISO 3252:2019)
Powder metallurgy - Vocabulary (ISO 3252:2019)
Pulvermetallurgie - Begriffe (ISO 3252:2019)
Métallurgie des poudres - Vocabulaire (ISO 3252:2019)
Ta slovenski standard je istoveten z: EN ISO 3252:2019
ICS:
01.040.77 Metalurgija (Slovarji) Metallurgy (Vocabularies)
77.160 Metalurgija prahov Powder metallurgy
SIST EN ISO 3252:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3252:2019

---------------------- Page: 2 ----------------------
SIST EN ISO 3252:2019


EN ISO 3252
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2019
EUROPÄISCHE NORM
ICS 01.040.77; 77.160 Supersedes EN ISO 3252:2000
English Version

Powder metallurgy - Vocabulary (ISO 3252:2019)
Métallurgie des poudres - Vocabulaire (ISO 3252:2019) Pulvermetallurgie - Begriffe (ISO 3252:2019)
This European Standard was approved by CEN on 9 August 2019.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 23 October 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3252:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 3252:2019
EN ISO 3252:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 3252:2019
EN ISO 3252:2019 (E)
European foreword
This document (EN ISO 3252:2019) has been prepared by Technical Committee ISO/TC 119 "Powder
metallurgy" in collaboration with Technical Committee CEN/SS M11 “Powder metallurgy” the
secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall
be withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3252:2000.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 3252:2019 has been approved by CEN as EN ISO 3252:2019 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 3252:2019

---------------------- Page: 6 ----------------------
SIST EN ISO 3252:2019
INTERNATIONAL ISO
STANDARD 3252
Fifth edition
2019-08
Powder metallurgy — Vocabulary
Métallurgie des poudres — Vocabulaire
Reference number
ISO 3252:2019(E)
©
ISO 2019

---------------------- Page: 7 ----------------------
SIST EN ISO 3252:2019
ISO 3252:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no
...

SLOVENSKI STANDARD
oSIST prEN ISO 3252:2018
01-junij-2018
Metalurgija prahov - Slovar (ISO/DIS 3252:2018)
Powder metallurgy - Vocabulary (ISO/DIS 3252:2018)
Pulvermetallurgie - Begriffe (ISO/DIS 3252:2018)
Métallurgie des poudres - Vocabulaire (ISO/DIS 3252:2018)
Ta slovenski standard je istoveten z: prEN ISO 3252
ICS:
01.040.77 Metalurgija (Slovarji) Metallurgy (Vocabularies)
77.160 Metalurgija prahov Powder metallurgy
oSIST prEN ISO 3252:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 3252:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 3252:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3252
ISO/TC 119 Secretariat: SIS
Voting begins on: Voting terminates on:
2018-04-05 2018-06-28
Powder metallurgy — Vocabulary
Métallurgie des poudres — Vocabulaire
ICS: 77.160; 01.040.77
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3252:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 3252:2018
ISO/DIS 3252:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 3252:2018
ISO/DIS 3252:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms for powders. 1
3.2 Terms for forming. 8
3.3 Terms for sintering .14
3.4 Terms for post-sintering treatments .19
3.5 Terms for powder metallurgy materials .20
Bibliography .28
© ISO 2018 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 3252:2018
ISO/DIS 3252:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.