Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009)

ISO 9612:2009 specifies an engineering method for measuring workers' exposure to noise in a working environment and calculating the noise exposure level. ISO 9612:2009 deals with A-weighted levels but is applicable also to C-weighted levels. Three different strategies for measurement are specified. The method is useful where a determination of noise exposure to engineering grade is required, e.g. for detailed noise exposure studies or epidemiological studies of hearing damage or other adverse effects.
The measuring process requires observation and analysis of the noise exposure conditions so that the quality of the measurements can be controlled. ISO 9612:2009 provides methods for estimating the uncertainty of the results.
ISO 9612:2009 is not intended for assessment of masking of oral communication or assessment of infrasound, ultrasound and non-auditory effects of noise. It does not apply to the measurement of the noise exposure of the ear when hearing protectors are worn.
Results of the measurements performed in accordance with ISO 9612:2009 can provide useful information when defining priorities for noise control measures.

Akustik - Bestimmung der Lärmexposition am Arbeitsplatz - Verfahren der Genauigkeitsklasse 2 (Ingenieurverfahren) (ISO 9612:2009)

Diese Internationale Norm legt ein Verfahren der Genauigkeitsklasse 2 fest, um die Lärmbelastung von Beschäftigten am Arbeitsplatz zu erfassen und den Lärmexpositionspegel zu berechnen. Diese Internationale Norm behandelt die Messung von A-bewerteten Pegeln, ist aber ebenso auf C-bewertete Pegel anwendbar. Es werden drei verschiedene Messstrategien festgelegt. Die Anwendung dieses Verfahrens ist zweckmäßig, wenn die Ermittlung der Lärmexposition entsprechend der Genauigkeitsklasse 2 gefordert ist, z. B. für genaue Lärmbelastungsstudien oder epidemiologische Studien im Zusammenhang mit der Entstehung von Gehör¬schäden oder anderen negativen Lärmwirkungen.
Die Durchführung der Messung erfordert die Beobachtung und Analyse der Lärmbelastungsbedingungen, so dass die Qualität der Messungen überprüft werden kann. Diese Internationale Norm beschreibt Methoden zur Abschätzung der Unsicherheit der Ergebnisse.
Diese Internationale Norm ist nicht dafür vorgesehen, die Verdeckung von Sprache zu untersuchen oder Infraschall, Ultraschall und extraaurale Wirkungen von Lärm zu beurteilen. Sie ist nicht geeignet, um die Lärmbelastung des durch Gehörschützer geschützten Ohres zu messen.
Die Ergebnisse der Messungen, die in Übereinstimmung mit dieser Internationalen Norm durchgeführt wurden, können nützliche Informationen für die Festlegung von Prioritäten bei Lärmminderungsmaßnahmen liefern.

Acoustique - Détermination de l'exposition au bruit en milieu de travail - Méthode d'expertise (ISO 9612:2009)

L'ISO 9612:2009 spécifie une méthode d'expertise permettant de mesurer l'exposition au bruit des travailleurs dans un environnement de travail et de calculer le niveau d'exposition au bruit. Elle traite des niveaux pondérés A, mais est également applicable aux niveaux pondérés C. Trois stratégies de mesurage différentes sont spécifiées. La méthode est utile lorsque l'exposition au bruit doit être déterminée avec une classe d'expertise, par exemple pour des études détaillées d'exposition au bruit ou pour des études épidémiologiques relatives à une détérioration de l'audition ou d'autres effets nocifs.
Le processus de mesurage nécessite une observation et une analyse des conditions d'exposition au bruit permettant le contrôle de la qualité des mesurages. L'ISO 9612:2009 fournit des méthodes permettant d'estimer l'incertitude des résultats.
L'ISO 9612:2009 n'est pas destinée à l'évaluation du masquage de la communication parlée ni à l'évaluation des effets des infrasons, des ultrasons et des effets non auditifs du bruit. Elle ne s'applique pas au mesurage de l'exposition au bruit de l'oreille lorsqu'elle est munie de protecteurs individuels contre le bruit.
Les résultats des mesurages effectués conformément à l'ISO 9612:2009 peuvent fournir des informations utiles lors de la définition des priorités en matière de mesures de réduction du bruit.

Akustika - Določanje izpostavljenosti hrupu v delovnem okolju - Inženirska metoda (ISO 9612:2009)

Ta mednarodni standard določa inženirsko metodo za merjenje izpostavljenosti delavcev hrupu v delovnem okolju ter za izračun ravni izpostavljenosti hrupu. Ta mednarodni standard obravnava A-vrednotene ravni, vendar se uporablja tudi za C-vrednotene ravni. Navaja tri različne strategije merjenja. Metoda se uporablja, kadar je potrebno ugotavljanje izpostavljenosti hrupu na inženirski stopnji, npr. za podrobne študije izpostavljenosti hrupu ali za epidemiološke študije o poškodbi sluha ali drugih škodljivih posledic. Obravnavani merilni postopek zahteva opazovanje in analize razmer pri izpostavljenosti hrupu, tako da je mogoče nadzorovati kakovost meritev. Ta mednarodni standard določa metode za ocenjevanje negotovosti rezultatov. Ta mednarodni standard ni namenjen oceni motenj pri govorni komunikaciji ali za ocenjevanje infrazvoka, ultrazvoka ali učinkov hrupa, ki ne vplivajo na sluh. Ne uporablja se za merjenje izpostavljenosti ušesa hrupu pri uporabi osebne varovalne opreme za varovanje sluha. Rezultati meritev, opravljenih v skladu s tem mednarodnim standardom, lahko dajo uporabne podatke za določanje prednostnega reda pri ukrepih za obvladovanje hrupa.

General Information

Status
Published
Publication Date
31-Mar-2009
Withdrawal Date
30-Oct-2009
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Apr-2009
Due Date
31-Aug-2009
Completion Date
01-Apr-2009

Relations

Buy Standard

Standard
EN ISO 9612:2009 - K standardu spada še Excel datoteka za izračune (Angleški dodatek k SIST EN ISO 9612:2009, zip-file)
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard – translation
EN ISO 9612:2009 - K standardu spada še Excel datoteka za izračune (Slovenski dodatek k SIST EN ISO 9612:2009)
Slovenian language
47 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 9612:2007
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9612:2009
01-julij-2009
1DGRPHãþD
SIST ISO 9612:1998
$NXVWLND'RORþDQMHL]SRVWDYOMHQRVWLKUXSXYGHORYQHPRNROMX,QåHQLUVNDPHWRGD
,62
Acoustics - Determination of occupational noise exposure - Engineering method (ISO
9612:2009)
Akustik - Bestimmung der Lärmexposition am Arbeitsplatz - Verfahren der
Genauigkeitsklasse 2 (Ingenieurverfahren) (ISO 9612:2009)
Acoustique - Détermination de l'exposition au bruit en milieu de travail - Méthode
d'expertise (ISO 9612:2009)
Ta slovenski standard je istoveten z: EN ISO 9612:2009
ICS:
13.140 Vpliv hrupa na ljudi Noise with respect to human
beings
SIST EN ISO 9612:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9612:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 9612:2009
EUROPEAN STANDARD
EN ISO 9612
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2009
ICS 13.140
English Version
Acoustics - Determination of occupational noise exposure -
Engineering method (ISO 9612:2009)
Acoustique - Détermination de l'exposition au bruit en Akustik - Bestimmung der Lärmexposition am Arbeitsplatz -
milieu de travail - Méthode d'expertise (ISO 9612:2009) Verfahren der Genauigkeitsklasse 2 (Ingenieurverfahren)
(ISO 9612:2009)
This European Standard was approved by CEN on 5 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9612:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9612:2009
EN ISO 9612:2009 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9612:2009
EN ISO 9612:2009 (E)
Foreword
This document (EN ISO 9612:2009) has been prepared by Technical Committee ISO/TC 43 "Acoustics" in
collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at
the latest by October 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 9612:2009 has been approved by CEN as a EN ISO 9612:2009 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 9612:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 9612:2009

INTERNATIONAL ISO
STANDARD 9612
Second edition
2009-04-01


Acoustics — Determination of
occupational noise exposure —
Engineering method
Acoustique — Détermination de l'exposition au bruit en milieu de
travail — Méthode d'expertise




Reference number
ISO 9612:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------

SIST EN ISO 9612:2009
ISO 9612:2009(E)
PDF disclaimer
This PDF file may contain
...

SLOVENSKI SIST EN ISO 9612

STANDARD
julij 2009













Akustika – Določanje izpostavljenosti hrupu v delovnem okolju – Inženirska

metoda (ISO 9612:2009)


Acoustics – Determination of occupational noise exposure – Engineering method

(ISO 9612:2009)


Acoustique – Détermination de I'exposition au bruit en milieu de travail – Méthode

d'expertise (ISO 9612:2009)



Akustik – Bestimmung der Larmexposition am Arbeitsplatz – Verfahren der

Genauigkeitsklasse 2 (Ingenieurverfahren) (ISO 9612:2009)




















Referenčna oznaka
ICS 13.140 SIST EN ISO 9612:2009 (sl)



Nadaljevanje na straneh II, III in od 2 do 45



© 2013-07. Slovenski prevod standarda je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9612 : 2009
NACIONALNI UVOD

Standard SIST EN ISO 9612 (sl), Akustika – Določanje izpostavljenosti hrupu v delovnem okolju –
Inženirska metoda (ISO 9612:2009), 2009, ima status slovenskega standarda in je istoveten
evropskemu standardu EN ISO 9612 (en), Acoustics – Determination of occupational noise exposure
– Engineering method (ISO 9612:2009), 2009.

NACIONALNI PREDGOVOR

Evropski standard EN ISO 9612:2009 je pripravil tehnični odbor ISO/TC 43 Akustika v sodelovanju s
tehničnim odborom Evropskega komiteja za standardizacijo CEN/TC 211 Akustika. Slovenski standard
SIST EN ISO 9612:2009 je prevod evropskega standarda EN ISO 9612:2009. V primeru spora glede
besedila slovenskega prevoda v tem standardu je odločilen izvirni evropski standard. Slovenski
prevod SIST EN ISO 9612:2009 je pripravil tehnični odbor SIST/TC AKU Akustika.

Odločitev za izdajo tega standarda je dne 21. maja 2009 sprejel SIST/TC AKU Akustika.

ZVEZA S STANDARDI

S privzemom tega evropskega standarda veljajo za omenjeni namen referenčnih standardov vsi
standardi, navedeni v izvirniku, razen tistih, ki so že sprejeti v nacionalno standardizacijo:

SIST ISO 1999:2006 Akustika – Ugotavljanje izpostavljenosti hrupu pri delu in ocena
okvare sluha zaradi hrupa

Vodilo ISO/IEC 98-3 Merilna negotovost – 3. del: Vodilo za izražanje merilne negotovosti
(GUM: 1995)

SIST EN 60942:2004  Elektroakustika – Kalibratorji za zvokomere

SIST EN 61252 Elektroakustika – Specifikacije osebnih merilnikov izpostavljenosti
zvoku

SIST EN 61672-1:2004 Elektroakustika – Merilniki ravni zvoka – 1. del: Specifikacije

OSNOVA ZA IZDAJO STANDARDA

– privzem standarda EN ISO 9612:2009

PREDHODNA IZDAJA

SIST ISO 9612:1998 Akustika – Smernice za merjenje in oceno izpostavljenosti hrupu v delovnem
okolju

OPOMBE

– Povsod, kjer se v besedilu standarda uporablja izraz “evropski standard” oziroma “mednarodni
standard”, v SIST EN ISO 9612:2009 to pomeni “slovenski standard”.

– Uvod in nacionalni predgovor nista sestavni del standarda.

II

---------------------- Page: 2 ----------------------

SIST EN ISO 9612 : 2009
– Ta nacionalni dokument je istoveten EN ISO 9612:2009 in je objavljen z dovoljenjem
CEN

Rue de Stassart, 36
1050 Bruselj
Belgija

This national document is identical with EN ISO 9612:2009 and is published with the permission of
CEN

Rue de Stassart, 36
1050 Bruxelles
Belgium
III

---------------------- Page: 3 ----------------------

EVROPSKI STANDARD EN ISO 9612
EUROPEAN STANDARD
EUROPÄISCHE NORM
NORME EUROPÉENNE april 2009


ICS: 13.140




Slovenska izdaja

Akustika – Določanje izpostavljenosti hrupu v delovnem okolju – Inženirska
metoda (ISO 9612:2009)

Acoustics – Determination of Acoustique – Détermination de Akustik – Bestimmung der
occupational noise exposure – I'exposition au bruit en milieu de Larmexposition am Arbeitsplatz –
Engineering method travail – Méthode d'expertise Verfahren der Genauigkeitsklasse 2
(ISO 9612:2009) (ISO 9612:2009) (Ingenieurverfahren) (ISO 9612:2009)




Ta evropski standard je CEN sprejel 5. marca 2009.

Člani CEN morajo izpolnjevati notranje predpise CEN/CENELEC, s katerimi je predpisano, da mora
biti ta standard brez kakršnih koli sprememb sprejet kot nacionalni standard. Seznami najnovejših
izdaj teh nacionalnih standardov in njihovi bibliografski podatki so na voljo pri Upravnem centru CEN
ali pri katerem koli članu CEN.

Ta evropski standard obstaja v treh uradnih izdajah (angleški, francoski, nemški). Izdaje v drugih
jezikih, ki jih člani CEN na lastno odgovornost prevedejo in izdajo ter prijavijo pri Upravnem centru
CEN, veljajo kot uradne izdaje.

Člani CEN so nacionalni organi za standarde Avstrije, Belgije, Bolgarije, Cipra, Češke republike,
Danske, Estonije, Finske, Francije, Grčije, Irske, Islandije, Italije, Latvije, Litve, Luksemburga,
Madžarske, Malte, Nemčije, Nizozemske, Norveške, Poljske, Portugalske, Romunije, Slovaške,
Slovenije, Španije, Švedske, Švice i
...

SLOVENSKI STANDARD
oSIST prEN ISO 9612:2007
01-julij-2007
$NXVWLND'RORþDQMHL]SRVWDYOMHQRVWLKUXSXYGHORYQHPRNROMX,QåHQLUVNDPHWRGD
,62',6
Acoustics - Determination of occupational noise exposure - Engineering method
(ISO/DIS 9612:2007)
Acoustique - Détermination de l'exposition au bruit en milieu de travail - Méthode
d'expertise (ISO/DIS 9612:2007)
Ta slovenski standard je istoveten z: prEN ISO 9612
ICS:
13.140 Vpliv hrupa na ljudi Noise with respect to human
beings
oSIST prEN ISO 9612:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 9612
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2007
ICS 13.140

English Version
Acoustics - Determination of occupational noise exposure -
Engineering method (ISO/DIS 9612:2007)
Acoustique - Détermination de l'exposition au bruit en
milieu de travail - Méthode d'expertise (ISO/DIS 9612:2007)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 211.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 9612:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
prEN ISO 9612:2007 (E)




Foreword

This document (prEN ISO 9612:2007) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 "Acoustics", the
secretariat of which is held by DS.

This document is currently submitted to the parallel Enquiry.


Endorsement notice

The text of ISO/DIS 9612:2007 has been approved by CEN as prEN ISO 9612:2007 without
any modifications.

2

---------------------- Page: 3 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 9612
ISO/TC 43/SC 1 Secretariat: DS
Voting begins on: Voting terminates on:
2007-03-29 2007-08-29
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Acoustics — Determination of occupational noise exposure —
Engineering method
Acoustique — Détermination de l'exposition au bruit en milieu de travail — Méthode d'expertise
[Revision of first edition (ISO 9612:1997)]
ICS 13.140

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a parallel two-month FDIS
vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITIO
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.