CEN ISO/TS 19807-2:2023
(Main)Nanotechnologies - Magnetic nanomaterials - Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction (ISO/TS 19807-2:2021)
Nanotechnologies - Magnetic nanomaterials - Part 2: Specification of characteristics and measurement methods for nanostructured magnetic beads for nucleic acid extraction (ISO/TS 19807-2:2021)
This document specifies characteristics to be measured of magnetic beads in suspension and powder forms for nucleic acid extraction applications. This document deals with magnetic beads that contain a substantial amount of magnetic nanoparticles (which can be superparamagnetic). Potential applicable measurement methods are listed for the individual characteristics. Specifically, this document lists critical characteristics of magnetic beads and suspensions, and additional characteristics to describe the magnetic beads and the suspension for nucleic acid extraction.
Health, safety and environmental aspects of magnetic beads are not within the scope of this document.
Nanotechnologien - Magnetische Nanopartikel - Teil 2: Festlegung der Merkmale und Messverfahren für nanostrukturierte magnetische Beads zur Nukleinsäureextraktion (ISO/TS 19807‑2:2021)
Dieses Dokument legt die zu messenden Eigenschaften von magnetischen Beads in Suspensions- und Pulverform für Anwendungen der Nukleinsäure-Extraktion fest. Dieses Dokument behandelt magnetische Beads, die eine erhebliche Menge an magnetischen Nanopartikeln enthalten (die superparamagnetisch sein können). Für die einzelnen Eigenschaften werden mögliche Messverfahren angegeben. Im Einzelnen sind in diesem Dokument wesentliche Eigenschaften von magnetischen Beads und Suspensionen sowie zusätzliche Eigenschaften zur Beschreibung der magnetischen Beads und der Suspension für die Nukleinsäure-Extraktion aufgeführt.
Gesundheits-, Sicherheits- und Umweltaspekte von magnetischen Beads gehören nicht zum Anwendungs¬bereich dieses Dokuments.
Nanotechnologies - Nanomatériaux magnétiques - Partie 2: Spécification des caractéristiques et des méthodes de mesure pour les billes magnétiques nanostructurées pour l’extraction d’acide nucléïque (ISO/TS 19807-2:2021)
Nanotehnologije - Magnetni nanomateriali - 2. del: Specifikacija lastnosti in merilnih metod za nanostrukturirane magnetne kroglice za ekstrakcijo nukleinskih kislin (ISO/TS 19807-2:2021)
Ta dokument določa lastnosti, ki se jih meri pri magnetnih nizih v suspenziji in praških za ekstrakcijo nukleinske kisline. Ta dokument obravnava magnetne nize, ki vsebujejo bistveno količino magnetnih nanodelcev (ki so lahko superparamagnetni nanodelci). Potencialno uporabne merilne metode so navedene za posamezne lastnosti. Ta dokument posebej navaja ključne lastnosti magnetnih nizov in suspenzij in dodatne lastnosti za opis magnetnih nizov in suspenzije za ekstrakcijo nukleinske kisline.
V področje uporabe tega dokumenta niso vključeni vidiki zdravja, varnosti in varstva okolja magnetnih nizov.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 19807-2:2023
01-maj-2023
Nanotehnologije - Magnetni nanomateriali - 2. del: Specifikacija lastnosti in
merilnih metod za nanostrukturirane magnetne kroglice za ekstrakcijo nukleinskih
kislin (ISO/TS 19807-2:2021)
Nanotechnologies - Magnetic nanomaterials - Part 2: Specification of characteristics and
measurement methods for nanostructured magnetic beads for nucleic acid extraction
(ISO/TS 19807-2:2021)
Nanotechnologies - Nanomatériaux magnétiques - Partie 2: Spécification des
caractéristiques et des méthodes de mesure pour les billes magnétiques
nanostructurées pour l’extraction d’acide nucléïque (ISO/TS 19807-2:2021)
Ta slovenski standard je istoveten z: CEN ISO/TS 19807-2:2023
ICS:
07.120 Nanotehnologije Nanotechnologies
SIST-TS CEN ISO/TS 19807-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 19807-2:2023
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 19807-2:2023
CEN ISO/TS 19807-2
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
March 2023
TECHNISCHE SPEZIFIKATION
ICS 07.120
English Version
Nanotechnologies - Magnetic nanomaterials - Part 2:
Specification of characteristics and measurement methods
for nanostructured magnetic beads for nucleic acid
extraction (ISO/TS 19807-2:2021)
Nanotechnologies - Nanomatériaux magnétiques -
Partie 2: Spécification des caractéristiques et des
méthodes de mesure pour les billes magnétiques
nanostructurées pour l'extraction d'acide nucléïque
(ISO/TS 19807-2:2021)
This Technical Specification (CEN/TS) was approved by CEN on 17 March 2023 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 19807-2:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 19807-2:2023
CEN ISO/TS 19807-2:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 19807-2:2023
CEN ISO/TS 19807-2:2023 (E)
European foreword
The text of ISO/TS 19807-2:2021 has been prepared by Technical Committee ISO/TC 229
"Nanotechnologies” of the International Organization for Standardization (ISO) and has been taken over
as CEN ISO/TS 19807-2:2023 by Technical Committee CEN/TC 352 “Nanotechnologies” the secretariat
of which is held by AFNOR.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/TS 19807-2:2021 has been approved by CEN as CEN ISO/TS 19807-2:2023 without any
modification.
3
---------------------- Page: 5 -------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.