Conveyor belts for general purpose use - Electrical and flammability safety requirements

This European Standard specifies electrical and flammability safety requirements for general purpose conveyor belts not intended for use in underground installations and a means of categorizing conveyor belts in terms of the level of safety sought in their end use application. This European Standard does not provide electrical safety requirements for volume resistance which may be measured by the methods in EN ISO 21178 and which is relevant to some types of light conveyor belts.
This European Standard is not applicable to conveyor belts which are manufactured before the date of publication of this document by CEN.
NOTE 1   Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC, this being covered in EN 14973.
NOTE 2   EN 12882 is not a product standard but is intended to help users of conveyor belts to select the required electrical and flammability safety properties needed following a suitable risk assessment. No requirements are, therefore, included for marking, information to be supplied, etc., these matters being covered in relevant product standards such as EN ISO 14890 and EN ISO 15236 1.

Fördergurte für allgemeine Anwendung - Elektrische und brandtechnische Sicherheitsanforderungen

Diese Europäische Norm legt elektrische und brandtechnische Anforderungen an Fördergurte für allgemeine Anwendung fest, die nicht für den Einsatz unter Tage vorgesehen sind, sowie die Klassifizierung von Fördergurten hinsichtlich des für den Verwendungszweck angestrebten Sicherheitsgrads. In dieser Europäischen Norm sind keine Sicherheitsanforderungen an den elektrischen Durchgangswiderstand festgelegt, der mit den in EN ISO 21178 genannten Verfahren gemessen werden kann und der für einige Typen leichter Fördergurte von Bedeutung ist.
Diese Europäische Norm gilt nicht für Fördergurte, die vor dem Datum der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden.
ANMERKUNG 1 Richtlinie 94/9/EG, die Einrichtungen und Schutzsysteme für den Einsatz in potentiell explosiven Atmosphären betrifft, kann für den Maschinentyp oder Einrichtungen zutreffen, die durch diese Europäische Norm abgedeckt sind. Die vorliegende Norm ist nicht zur Erfüllung der wesentlichen Gesundheits- und Sicherheitsanforderungen der Richtlinie 94/9/EG vorgesehen, die durch EN 14973 abgedeckt ist.
ANMERKUNG 2 EN 12882 ist keine Produktnorm, sondern dazu gedacht, den Anwendern von Fördergurten bei der Auswahl der erforderlichen elektrischen und brandtechnischen sicherheitsrelevanten Eigenschaften zu helfen, die aufgrund einer angemessenen Risikobeurteilung notwendig sind. Deshalb sind keine Anforderungen an Kennzeichnung, bereitzustellende Angaben usw. enthalten, da diese Themen durch die entsprechenden Produktnormen wie beispielsweise EN ISO 14890 und EN ISO 15236-1 abgedeckt sind.

Courroies transporteuses à usage général - Prescriptions de sécurité électrique et protection contre l'inflammabilité

La présente Norme européenne spécifie les prescriptions de sécurité électrique et les prescriptions en matière de protection contre l’inflammabilité relatives aux courroies transporteuses à usage général qui ne sont pas destinées à être utilisées dans des installations souterraines, ainsi qu’une méthode de classement des courroies transporteuses en termes de niveau de sécurité recherché lors de l’application finale. La présente Norme européenne ne fournit pas d’prescriptions de sécurité électrique pour la résistance transversale qui peut être mesurée selon les méthodes de l’EN ISO 21178 et qui est pertinente pour certains types de courroies transporteuses légères.
La présente Norme européenne ne s’applique pas aux courroies transporteuses fabriquées avant la date de publication du présent document par le CEN.
NOTE 1   La Directive 94/9/CE concernant les appareils et les systèmes de protection destinés à être utilisés en atmosphères potentiellement explosibles peut être applicable au type de machine ou d’appareil couvert par la présente Norme européenne. La présente norme n’est pas destinée à fournir un moyen de se conformer aux exigences essentielles en matière de santé et de sécurité de la Directive 94/9/CE, cet aspect étant traité dans l’EN 14973.
NOTE 2   L’EN 12882 n'est pas une norme de produit mais est prévue pour aider les utilisateurs de courroies transporteuses à choisir les propriétés de sécurité électrique et d'inflammabilité requises après une évaluation appropriée des risques. Aucune prescription n'est donc incluse pour le marquage, l'information à fournir, etc., ces sujets étant couverts par les normes de produit pertinentes telles que l’EN ISO 14890 et l’EN ISO 15236-1.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev za splošne namene - Električne in požarnovarnostne zahteve

Ta evropski standard določa električne in požarnovarnostne zahteve za trakove tračnih transporterjev za splošne namene, ki niso namenjeni za uporabo v napravah pod zemljo, ter načine za razvrstitev trakov tračnih transporterjev glede na stopnjo varnosti, ki je zahtevana za končno uporabo. Ta evropski standard ne določa električnih varnostnih zahtev za volumsko upornost, ki jo je mogoče izmeriti z metodami iz
EN ISO 21178 in ki je relevantna za nekatere vrste lahkih trakov tračnih transporterjev.
Ta evropski standard se ne uporablja za trakove tračnih transporterjev, ki so bili izdelani, preden je
Evropski odbor za standardizacijo (CEN) objavil ta dokument.
OPOMBA 1: Direktiva 94/9/ES v zvezi z opremo in zaščitnimi sistemi, namenjenimi za uporabo v potencialno eksplozivnih atmosferah, se lahko uporablja za vrsto strojev ali opreme, ki jo zajema ta evropski standard. Ta standard ni namenjen zagotavljanju načinov za dokazovanje skladnosti z bistvenimi zdravstvenimi in varnostnimi zahtevami Direktive 94/9/ES, saj je to zajeto v standardu EN 14973.
OPOMBA 2: EN 12882 ni standard za proizvode, ampak je namenjen kot pomoč uporabnikom trakov tračnih transporterjev, da lahko izberejo obvezno potrebne električne in požarnovarnostne zahteve po primerni oceni tveganja. Standard torej ne vključuje zahtev glede označevanja, podatkov, ki jih je treba zagotoviti, itd., saj to zajemajo ustrezni standardi za proizvode, kot sta EN ISO 14890 in EN ISO 15236-1.

General Information

Status
Published
Publication Date
04-Aug-2015
Withdrawal Date
28-Feb-2016
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
04-Oct-2021

Relations

Buy Standard

Standard
EN 12882:2015
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 12882:2014
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fördergurte für allgemeine Anwendung - Elektrische und brandtechnische SicherheitsanforderungenCourroies transporteuses à usage général - Prescriptions de sécurité électrique et protection contre l'inflammabilitéConveyor belts for general purpose use - Electrical and flammability safety requirements53.040.20Deli za transporterjeComponents for conveyors13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:Ta slovenski standard je istoveten z:EN 12882:2015SIST EN 12882:2015en,fr,de01-oktober-2015SIST EN 12882:2015SLOVENSKI
STANDARDSIST EN 12882:20081DGRPHãþD



SIST EN 12882:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12882
August 2015 ICS 53.040.20 Supersedes EN 12882:2008English Version
Conveyor belts for general purpose use - Electrical and flammability safety requirements
Courroies transporteuses à usage général - Prescriptions de sécurité électrique et protection contre l'inflammabilité
Fördergurte für allgemeine Anwendung - Elektrische und brandtechnische Sicherheitsanforderungen This European Standard was approved by CEN on 27 June 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12882:2015 ESIST EN 12882:2015



EN 12882:2015 (E) 2 Contents Page European foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Safety requirements .6 4.1 General .6 4.2 Electrical conductivity .6 4.3 Flame retardation .6 4.4 Fire simulation .7 4.5 Drum friction .7 5 Safety categories .7 5.1 Category 1 .7 5.2 Category 2A .7 5.3 Category 2B .
...

SLOVENSKI STANDARD
oSIST prEN 12882:2014
01-januar-2014
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY]DVSORãQH
QDPHQH(OHNWULþQHLQSRåDUQRYDUQRVWQH]DKWHYH
Conveyor belts for general purpose use - Electrical and flammability safety requirements
Fördergurte für allgemeine Anwendung - Elektrische und brandtechnische
Sicherheitsanforderungen
Courroies transporteuses à usage général - Prescriptions de sécurité électrique et
protection contre l'inflammabilité
Ta slovenski standard je istoveten z: prEN 12882
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
53.040.20 Deli za transporterje Components for conveyors
oSIST prEN 12882:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12882:2014

---------------------- Page: 2 ----------------------
oSIST prEN 12882:2014


EUROPEAN STANDARD
DRAFT
prEN 12882
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2013
ICS 53.040.20 Will supersede EN 12882:2008
English Version
Conveyor belts for general purpose use - Electrical and
flammability safety requirements
Courroies transporteuses à usage général - Prescriptions Fördergurte für allgemeine Anwendung - Elektrische und
de sécurité électrique et protection contre l'inflammabilité brandtechnische Sicherheitsanforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 188.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12882:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12882:2014
prEN 12882:2013 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Safety requirements .6
5 Safety categories .7
Annex A (informative) Suggested belt approval / certification options . 11
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 2006/42/EC . 12
Bibliography .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.