CEN/TS 16384:2012
(Main)Synthetic sport systems - Leaching test
Synthetic sport systems - Leaching test
This Technical Specification specifies testing methods concerning the release from synthetic sport systems for outdoor of substances in ground water, surface water and drainage water by performing a dedicated leaching test on a sample of a "synthetic sport" system for outdoor.
In addition, this Technical Specification provides tools for a relative leaching assessment of system's components (e.g. granules) of different origin or nature.
This Technical Specification does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Synthetische Sportsysteme - Auslaugungsprüfung
Mittels einer an einer Probe eines synthetischen Sportsystems durchgeführten, eigenen Auslaugungsprüfung legt diese Technische Spezifikation Prüfverfahren bezüglich der Abgabe von Substanzen aus einem synthetischen Sportsystem für den Außenbereich an Grundwasser, Oberflächenwasser und ausgeleitetem Wasser fest.
Zusätzlich stellt diese Technische Spezifikation Instrumente für eine relative Auslaugungsbewertung bei Systembestandteilen unterschiedlicher Herkunft oder Beschaffenheit (z. B. Granulate) bereit.
Diese Technische Spezifikation erhebt nicht den Anspruch, sämtliche mit der Nutzung entstehenden, eventuell vorhandenen Sicherheitsaspekte zu behandeln. Es liegt in der Verantwortlichkeit des Nutzers, angemessene Vorgehensweisen hinsichtlich Sicherheit und Gesundheit vor der Anwendung einzuführen sowie festzulegen, inwieweit behördliche Auflagen zutreffen.
Systèmes sportifs synthétiques - Essai de lixiviation
La présente Spécification technique définit des méthodes d'essai concernant le relargage de substances issues des systèmes sportifs synthétiques de plein air dans les eaux souterraines, les eaux de surface et les eaux de drainage en réalisant un essai de lixiviation dédié sur un échantillon de système « sportif synthétique » de plein air.
Elle fournit également des outils pour réaliser une évaluation relative de lixiviation de composants d'un système (granulats par exemple) d'origine ou de nature différents.
La présente Spécification technique n’a pas pour but de traiter tous les problèmes de sécurité qui sont, le cas échéant, liés à son utilisation. Il est de la responsabilité de l'utilisateur de la présente Spécification technique d'établir les pratiques de santé et de sécurité appropriées et de déterminer, avant son utilisation, les limites réglementaires applicables.
Sintetični športni sistemi - Preskus izluževanja
Ta tehnična specifikacija določa preskusne metode v zvezi z izpusti snovi iz sintetičnih športnih sistemov za zunanjo uporabo v podtalnico, površinske vode in drenažne vode z ustreznim preskusom izluževanja na vzorcu sintetičnega športnega sistema za zunanjo uporabo. Poleg tega ta tehnična specifikacija zagotavlja orodja za relativno oceno izluževanja sestavnih delov sistema (npr. granul) različnega izvora ali lastnosti. Ta tehnična specifikacija ne obravnava vseh morebitnih varnostnih težav, ki se nanašajo na njeno uporabo. Za vzpostavitev ustreznih varnostnih in zdravstvenih praks ter za določitev uporabnosti regulativnih omejitev pred uporabo je odgovoren uporabnik tega standarda.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 16384:2013
01-februar-2013
6LQWHWLþQLãSRUWQLVLVWHPL3UHVNXVL]OXåHYDQMD
Synthetic sport systems - Leaching test
Synthetische Sportsysteme - Auslaugungsprüfung
Systèmes sportifs synthétiques - Essai de lixiviation
Ta slovenski standard je istoveten z: CEN/TS 16384:2012
ICS:
97.220.10 Športni objekti Sports facilities
SIST-TS CEN/TS 16384:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16384:2013
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16384:2013
TECHNICAL SPECIFICATION
CEN/TS 16384
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
August 2012
ICS 97.220.10
English Version
Synthetic sport systems - Leaching test
Systèmes sportifs synthétiques - Essai de lixiviation Synthetische Sportsysteme - Auslaugungsprüfung
This Technical Specification (CEN/TS) was approved by CEN on 17 June 2012 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16384:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16384:2013
CEN/TS 16384:2012 (E)
Contents Page
Foreword .4
Introduction .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .6
4 Symbols and abbreviations .6
5 Principle .7
6 Apparatus and reagents .7
6.1 General .7
6.2 Tank .7
6.3 Watering system .7
6.4 Choice and quantity of tested materials . 10
7 Procedure . 10
7.1 Testing conditions . 10
7.1.1 Frequency/duration of the spraying/non-spraying periods and the flow rate . 10
7.1.2 Experiment duration . 11
7.1.3 Kin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.