EN 1069-1:2017+A1:2019

Water slides - Part 1: Safety requirements and test methods

This European Standard is applicable to all water slides installed in swimming pools of public use.
This Standard specifies general safety requirements for water slides in swimming pools of public use and specific requirements for defined types of water slides. These specific safety requirements are also applicable to undefined types as far as possible.
These requirements concern safety and the technical rules for design, calculation and testing.

Wasserrutschen - Teil 1: Sicherheitstechnische Anforderungen und Prüfverfahren

Diese Europäische Norm gilt für alle in öffentlichen genutzten Schwimmbädern eingebauten Wasserrutschen.
Diese Norm legt allgemeine sicherheitstechnische Anforderungen an alle Typen von Wasserrutschen in öffentlichen Schwimm¬bädern und besondere Anforderungen an definierte Wasserrutschen-Typen fest. Diese spezifischen sicherheitstechnischen Anforderungen sind, so weit wie möglich, auch auf nicht definierte Typen anzuwenden.
Diese Anforderungen betreffen die Sicherheit und die technischen Regeln für Ausführung, Berechnung und Prüfung von Wasserrutschen.

Toboggans aquatiques - Partie 1: Exigences de sécurité et méthodes d'essai

La présente Norme européenne est applicable à tous les toboggans aquatiques installés dans les piscines à usage public.
La présente norme spécifie des exigences générales de sécurité pour les toboggans aquatiques dans les piscines à usage public et des exigences spécifiques pour des types définis de toboggans aquatiques. Autant que possible, ces exigences spécifiques de sécurité sont également applicables à des types non définis.
Ces exigences portent sur la sécurité et les règles techniques de conception, de calcul et d'essais.

Vodni tobogani - 1. del: Varnostne zahteve in preskusne metode

Ta evropski standard se uporablja za vse vodne tobogane, ki so nameščeni v javnih plavalnih bazenih. Ta standard določa splošne varnostne zahteve za vodne tobogane v javnih plavalnih bazenih in posebne zahteve za določene vrste vodnih toboganov. Te posebne varnostne zahteve se uporabljajo tudi za nerazvrščene vrste toboganov, če je to le mogoče.
Te zahteve se nanašajo na varnost in tehnična pravila za projektiranje, izračunavanje in preskušanje.

General Information

• Status: Published
• Publication Date: 11-Jun-2019
• Withdrawal Date: 30-Dec-2019
• ICS: 97.220.40 - Outdoor and water sports equipment
• Technical Committee: CEN/TC 136 - Sports, playground and other recreational equipment
• Drafting Committee: CEN/TC 136/WG 3 - Water slides
• Ref Project: SIST EN 1069-1:2017+A1:2019 - Water slides - Part 1: Safety requirements and test methods

Relations

• Merged From: EN 1069-1:2017/FprA1 - Water slides - Part 1: Safety requirements and test methods
• Effective Date: 19-Jan-2023
• Merged From: EN 1069-1:2017 - Water slides - Part 1: Safety requirements and test methods
• Effective Date: 10-Apr-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1069-1:2017+A1:2019
01-september-2019
Nadomešča:
SIST EN 1069-1:2017
Vodni tobogani - 1. del: Varnostne zahteve in preskusne metode
Water slides - Part 1: Safety requirements and test methods
Wasserrutschen - Teil 1: Sicherheitstechnische Anforderungen und Prüfverfahren
Toboggans aquatiques - Partie 1: Exigences de sécurité et méthodes d'essai
Ta slovenski standard je istoveten z: EN 1069-1:2017+A1:2019
ICS:
97.220.40 Oprema za športe na Outdoor and water sports
prostem in vodne športe equipment
SIST EN 1069-1:2017+A1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1069-1:2017+A1:2019

---------------------- Page: 2 ----------------------

SIST EN 1069-1:2017+A1:2019


EN 1069-1:2017+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2019
EUROPÄISCHE NORM
ICS 97.220.40 Supersedes EN 1069-1:2017
English Version

Water slides - Part 1: Safety requirements and test
methods
Toboggans aquatiques - Partie 1: Exigences de sécurité Wasserrutschen - Teil 1: Sicherheitstechnische
et méthodes d'essai Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 14 May 2017 and includes Amendment 1 approved by CEN on 29 April 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1069-1:2017+A1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 1069-1:2017+A1:2019
EN 1069-1:2017+A1:2019 (E)
Contents Page

European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Classification . 11
4.1 Type 1 . 11
4.1.1 Type 1.1 . 11
4.1.2 Type 1.2 . 11
4.2 Type 2 . 11
4.2.1 Type 2.1 . 11
4.2.2 Type 2.2 . 11
4.3 Type 3 .
...