Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007)

ISO 6520-1:2007 serves as the basis for a precise classification and description of weld imperfections.
In order to avoid any confusion, the types of imperfection are defined with explanations and illustrations where necessary.
Metallurgical imperfections are not included.
Another system for the designation of imperfections is possible according to ISO/TS 17845. A correspondence is given between the existing classification of imperfections according to ISO 6520-1:2007 and the designation system according to ISO/TS 17845:2004.

Schweißen und verwandte Prozesse - Einteilung von geometrischen Unregelmäßigkeiten an metallischen Werkstoffen - Teil 1: Schmelzschweißen (ISO 6520-1:2007)

Dieser Teil der ISO 6520 soll als Basis für eine genaue Einordnung und Beschreibung von Schweißunregelmäßigkeiten dienen.
Um Unklarheiten zu vermeiden, sind die Unregelmäßigkeitsarten zusammen mit Erklärungen und, wenn notwendig, mit hinzugefügten Skizzen definiert.
Metallurgische Unregelmäßigkeiten sind nicht enthalten.
Ein weiteres System gemäß ISO/TS 17845 zur Benennung von Unregelmäßigkeiten ist möglich. Anhang B stellt den Zusammenhang zwischen der vorhandenen Einteilung von Unregelmäßigkeiten nach ISO 6520-1 und dem Benennungssystem nach ISO/TS 17845 dar.
ANMERKUNG - Zusätzlich zu den Begriffen in zwei der drei offiziellen Sprachen der ISO (Englisch und Französisch) gibt dieser Teil der ISO 6520 die entsprechenden Begriffe in deutscher Sprache an; diese Begriffe werden unter der Verantwortung der deutschen Mitgliedsorgansation (DIN) veröffentlicht. Dennoch können nur die in den offiziellen Sprachen angegebenen Begriffe als ISO-Begriffe erachtet werden.

Soudage et techniques connexes - Classification des défauts géométriques dans les soudures des matériaux métalliques - Partie 1: Soudage par fusion (ISO 6520-1:2007)

L'ISO 6520-1:2007 sert de base à une classification et à une description précises des défauts de soudure.
De manière à éviter des confusions, les types de défauts sont définis avec des commentaires et des illustrations au besoin.
Les défauts métallurgiques ne sont pas pris en considération.
Un autre système pour la désignation des défauts est possible selon l'ISO/TS 17845. La correspondance est donnée entre la classification existante des défauts selon l'ISO 6520-1:2006 et le système de désignation selon l'ISO/TS 17845:2004.

Varjenje in sorodni postopki - Klasifikacija geometrijskih nepopolnosti v kovinskih materialih - 1. del: Talilno varjenje (ISO 6520-1:2007)

General Information

Status
Published
Publication Date
30-Jun-2007
Withdrawal Date
30-Jan-2008
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Jul-2007
Due Date
19-Dec-2006
Completion Date
01-Jul-2007

Relations

Buy Standard

Standard
EN ISO 6520-1:2008
English language
62 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 6520-1:2005
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6520-1:2008
01-marec-2008
1DGRPHãþD
SIST EN ISO 6520-1:1999
Varjenje in sorodni postopki - Klasifikacija geometrijskih nepopolnosti v kovinskih
materialih - 1. del: Talilno varjenje (ISO 6520-1:2007)
Welding and allied processes - Classification of geometric imperfections in metallic
materials - Part 1: Fusion welding (ISO 6520-1:2007)
Schweißen und verwandte Prozesse - Einteilung von geometrischen
Unregelmäßigkeiten an metallischen Werkstoffen - Teil 1: Schmelzschweißen (ISO 6520
-1:2007)
Soudage et techniques connexes - Classification des défauts géométriques dans les
soudures des matériaux métalliques - Partie 1: Soudage par fusion (ISO 6520-1:2007)
Ta slovenski standard je istoveten z: EN ISO 6520-1:2007
ICS:
25.160.40
SIST EN ISO 6520-1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 6520-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2007
ICS 25.160.40 Supersedes EN ISO 6520-1:1998
English Version
Welding and allied processes - Classification of geometric
imperfections in metallic materials - Part 1: Fusion welding (ISO
6520-1:2007)
Soudage et techniques connexes - Classification des Schweißen und verwandte Prozesse - Einteilung von
défauts géométriques dans les soudures des matériaux geometrischen Unregelmäßigkeiten an metallischen
métalliques - Partie 1: Soudage par fusion (ISO 6520- Werkstoffen - Teil 1: Schmelzschweißen (ISO 6520-1:2007)
1:2007)
This European Standard was approved by CEN on 13 April 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6520-1:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 6520-1:2007 (E)





Foreword


This document (EN ISO 6520-1:2007) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2008, and conflicting national
standards shall be withdrawn at the latest by January 2008.

This document supersedes EN ISO 6520-1:1998.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.


Endorsement notice

The text of ISO 6520-1:2007 has been approved by CEN as EN ISO 6520-1:2007 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 6520-1
Second edition
Deuxième édition
2007-07-01

Welding and allied processes —
Classification of geometric imperfections
in metallic materials —
Part 1:
Fusion welding
Soudage et techniques connexes —
Classification des défauts géométriques
dans les soudures des matériaux
métalliques —
Partie 1:
Soudage par fusion
Schweißen und verwandte Prozesse —
Einteilung von geometrischen
Unregelmäßigkeiten an metallischen
Werkstoffen —
Teil 1:
Schmelzschweißen




Reference number
ISO 6520-1:2007(E/F)
©
ISO 2007

---------------------- Page: 4 ----------------------

ISO 6520-1:2007(E/F)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or v
...

SLOVENSKI oSIST prEN ISO 6520-1:2005

PREDSTANDARD
maj 2005
Varjenje in sorodni postopki - Klasifikacija geometrijskih nepopolnosti v
kovinskih materialih - 1. del: Talilno varjenje (ISO/DIS 6520-1:2005)
Welding and allied processes - Classification of geometric imperfections in metallic
materials - Part 1: Fusion welding (ISO/DIS 6520-1:2005)
ICS 25.160.40 Referenčna številka
oSIST prEN ISO 6520-1:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 6520-1 rev
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2005
ICS Will supersede EN ISO 6520-1:1998
English version
Welding and allied processes - Classification of geometric
imperfections in metallic materials - Part 1: Fusion welding
(ISO/DIS 6520-1:2005)
Soudage et techniques connexes - Classification des
défauts géométriques dans les soudures des matières
métalliques - Partie 1: Soudage par fusion (ISO/DIS 6520-
1:2005)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 6520-1 rev:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
prEN ISO 6520-1:2005 (E)






Foreword


This document (prEN ISO 6520-1:2005) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121
"Welding", the secretariat of which is held by DIN.

This document is currently submitted to the Parallel Enquiry.

This document will supersede EN ISO 6520-1:1998.

Endorsement notice

The text of ISO/DIS 6520-1:2005 has been approved by CEN as prEN ISO 6520-1:2005 without
any modifications.

2

---------------------- Page: 3 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 6520-1
PROJET DE NORME INTERNATIONALE ISO/DIS 6520-1
ISO/TC 44/SC 7 Secretariat/Secrétariat: BSI

Voting begins on/Début de vote Voting terminates on/Vote clos le
2005-02-10 2005-07-10
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  •  МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ  •  ORGANISATION INTERNATIONALE DE NORMALISATION

Welding and allied processes — Classification of geometric
imperfections in metallic materials —
Part 1:
Fusion welding
Soudage et techniques connexes — Classification des défauts
géométriques dans les soudures des matières métalliques —
Partie 1:
Soudage par fusion
[Revision of first edition / Révision de la première édition (ISO 6520-1:1998)]
ICS 25.160.40


Please see the administrative notes on page iv
Veuillez consulter les notes administratives en page iv

To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.


THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE REFERRED TO
AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.