EN 16602-70-17:2020
(Main)Space product assurance - Durability testing of coatings and surface finishes
Space product assurance - Durability testing of coatings and surface finishes
This standard specifies requirements for the durability testing of coatings most commonly used for space applications, i.e.:
- Thin film optical coatings
- Thermo-optical and thermal control coatings (the majority are paints, metallic deposits and coatings for stray light reduction)
- Metallic coatings for other applications (RF, electrical, corrosion protection)
This standard covers testing for both ground and in-orbit phases of a space mission, mainly for satellite applications.
This standard applies to coatings within off the shelf items
This standard specifies the types of test to be performed for each class of coating, covering the different phases of a space project (evaluation, qualification and acceptance)
This standard does not cover:
- The particular qualification requirements for a specific mission
- Specific applications of coatings for launchers (e.g. high temperature coatings)
- Specific functional testing requirements for the different coating classes
- Test requirements for long term storage
- Solar cell cover glass coatings
- Surface treatments and conformal coatings applied on EEE parts
Raumfahrtproduktsicherung - Dauerhaftigkeitsprüfung von Beschichtungen und Oberflächenbehandlungen
Assurance produit des projets spatiaux - Essais de durabilité des revêtements et finitions de surface
Zagotavljanje kakovosti proizvodov v vesoljski tehniki - Preskušanje trajnosti prevlek in površinske apreture
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 16602-70-17:2020
01-junij-2020
Zagotavljanje kakovosti proizvodov v vesoljski tehniki - Preskušanje trajnosti
prevlek in površinske apreture
Space product assurance - Durability testing of coatings and surface finishes
Raumfahrtproduktsicherung - Dauerhaftigkeitsprüfung von Beschichtungen und
Oberflächenbehandlungen
Assurance produit des projets spatiaux - Test de résistance pour les traitements et les
finitions de surfaces
Ta slovenski standard je istoveten z: EN 16602-70-17:2020
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
49.040 Prevleke in z njimi povezani Coatings and related
postopki, ki se uporabljajo v processes used in aerospace
letalski in vesoljski industriji industry
49.140 Vesoljski sistemi in operacije Space systems and
operations
SIST EN 16602-70-17:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 16602-70-17:2020
---------------------- Page: 2 ----------------------
SIST EN 16602-70-17:2020
EUROPEAN STANDARD
EN 16602-70-17
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2020
ICS 49.040; 49.140
English version
Space product assurance - Durability testing of coatings
and surface finishes
Assurance produit des projets spatiaux - Essais de Raumfahrtproduktsicherung - Dauerhaftigkeitsprüfung
durabilité des revêtements et finitions de surface von Beschichtungen und Oberflächenbehandlungen
This European Standard was approved by CEN on 1 December 2019.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2020 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. EN 16602-70-17:2020 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST EN 16602-70-17:2020
EN 16602-70-17:2020 (E)
Table of contents
European Foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 8
3 Terms, definitions and abbreviated terms . 9
3.1 Terms from other standards . 9
3.2 Terms specific to the present standard . 9
3.3 Abbreviated terms. 9
3.4 Conventions. 10
3.5 Nomenclature . 10
4 Principles . 12
4.1 General test approach . 12
4.2 Categories of use . 12
4.3 Coating classes . 13
4.3.1 Links to other standards .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.