EN ISO 4126-2:2019

Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2018)

This document specifies the requirements for bursting disc safety devices.
It includes the requirements for the design, manufacture, inspection, testing, certification, marking, and packaging.

Sicherheitseinrichtungen gegen unzulässigen Überdruck - Teil 2: Berstscheibeneinrichtungen (ISO 4126-2:2018)

Dieses Dokument legt die Anforderungen an Berstscheibeneinrichtungen fest.
Es legt ferner die Anforderungen an Konstruktion, Herstellung, Überwachung, Prüfung, Bescheinigung, Kennzeichnung und Verpackung fest.

Dispositifs de sécurité pour protection contre les pressions excessives - Partie 2: Dispositifs de sûreté à disque de rupture (ISO 4126-2:2018)

Le présent document spécifie les exigences des dispositifs de sûreté à disque de rupture.
Elle comprend les exigences de conception, de fabrication, de contrôle, d'essai, de certification, de marquage et de conditionnement.

Naprave za varovanje pred visokim tlakom - 2. del: Naprave z razpočnimi membranami (ISO 4126-2:2018)

Ta dokument določa zahteve za varnostne naprave z razpočnimi membranami.
Vključuje zahteve glede zasnove, izdelave, pregleda, preskušanja, certificiranja, označevanja
in pakiranja.

General Information

• Status: Published
• Publication Date: 12-Mar-2019
• Withdrawal Date: 29-Sep-2019
• ICS: 13.240 - Protection against excessive pressure
• Technical Committee: CEN/TC 69 - Industrial valves
• Drafting Committee: CEN/TC 69/WG 10 - Safety devices against excessive pressure
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-Mar-2019
• Completion Date: 13-Mar-2019
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 4126-2:2019 - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2018)

Relations

• Replaces: EN ISO 4126-2:2003/AC:2004 - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003)
• Effective Date: 20-Mar-2019
• Replaces: EN ISO 4126-2:2003/AC:2006 - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003)
• Effective Date: 20-Mar-2019
• Replaces: EN ISO 4126-2:2003 - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO 4126-2:2003)
• Effective Date: 13-May-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4126-2:2019
01-maj-2019
1DGRPHãþD
SIST EN ISO 4126-2:2003
SIST EN ISO 4126-2:2003/AC:2004
SIST EN ISO 4126-2:2003/AC:2007
1DSUDYH]DYDURYDQMHSUHGYLVRNLPWODNRPGHO1DSUDYH]UD]SRþQLPL
PHPEUDQDPL,62
Safety devices for protection against excessive pressure - Part 2: Bursting disc safety
devices (ISO 4126-2:2018)
Sicherheitseinrichtungen gegen unzulässigen Überdruck - Teil 2:
Berstscheibeneinrichtungen (ISO 4126-2:2018)
Dispositifs de sécurité pour protection contre les pressions excessives - Partie 2:
Dispositifs de sûreté à disque de rupture (ISO 4126-2:2018)
Ta slovenski standard je istoveten z: EN ISO 4126-2:2019
ICS:
13.240 Varstvo pred previsokim Protection against excessive
tlakom pressure
SIST EN ISO 4126-2:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4126-2:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 4126-2:2019


EN ISO 4126-2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 13.240 Supersedes EN ISO 4126-2:2003
English Version

Safety devices for protection against excessive pressure -
Part 2: Bursting disc safety devices (ISO 4126-2:2018)
Dispositifs de sécurité pour protection contre les Sicherheitseinrichtungen gegen unzulässigen
pressions excessives - Partie 2: Dispositifs de sûreté à Überdruck - Teil 2: Berstscheibeneinrichtungen (ISO
disque de rupture (ISO 4126-2:2018) 4126-2:2018)
This European Standard was approved by CEN on 3 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4126-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4126-2:2019
EN ISO 4126-2:2019 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/68/EU (PED) aimed to be covered . 4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 4126-2:2019
EN ISO 4126-2:2019 (E)
European foreword
This document (EN ISO 4126-2:2019) has been prepared by Technical Committee ISO/TC 185 "Safety
devices for protection against excessive pressure" in collaboration with Technical Committee CEN/TC
69 “Industrial valves” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4126-2:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, De
...