Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)

ISO 3744:2010 specifies methods for determining the sound power level or sound energy level of a noise source from sound pressure levels measured on a surface enveloping the noise source (machinery or equipment) in an environment that approximates to an acoustic free field near one or more reflecting planes. The sound power level (or, in the case of noise bursts or transient noise emission, the sound energy level) produced by the noise source, in frequency bands or with frequency A-weighting applied, is calculated using those measurements.
The methods specified in ISO 3744:2010 are suitable for all types of noise (steady, non-steady, fluctuating, isolated bursts of sound energy, etc.) defined in ISO 12001.
ISO 3744:2010 is applicable to all types and sizes of noise source (e.g. stationary or slowly moving plant, installation, machine, component or sub-assembly), provided the conditions for the measurements can be met.
The test environments that are applicable for measurements made in accordance with ISO 3744:2010 can be located indoors or outdoors, with one or more sound-reflecting planes present on or near which the noise source under test is mounted. The ideal environment is a completely open space with no bounding or reflecting surfaces other than the reflecting plane(s) (such as that provided by a qualified hemi-anechoic chamber), but procedures are given for applying corrections (within limits that are specified) in the case of environments that are less than ideal.
Information is given on the uncertainty of the sound power levels and sound energy levels determined in accordance with ISO 3744:2010, for measurements made in limited bands of frequency and with frequency A-weighting applied. The uncertainty conforms to ISO 12001:1996, accuracy grade 2 (engineering grade).

Akustik - Bestimmung der Schallleistungs- und Schallenergiepegel von Geräuschquellen aus Schalldruckmessungen - Hüllflächenverfahren der Genauigkeitsklasse 2 für ein im Wesentlichen freies Schallfeld über einer reflektierenden Ebene (ISO 3744:2010)

1.1 Allgemeines
Diese Internationale Norm legt Verfahren für die Bestimmung des Schallleistungs- oder Schallenergiepegels
einer Geräuschquelle aus Schalldruckpegeln fest, die auf einer Fläche gemessen werden, die die
Geräuschquelle (eine Maschine oder ein Gerät) umschließt (Hüllfläche), wobei sich die Geräuschquelle in
einer Umgebung befindet, die angenähert einem akustischen Freifeld in der Nähe einer oder mehrerer
reflektierender Ebenen entspricht. Der von der Geräuschquelle erzeugte Schallleistungspegel (oder Schallenergiepegel
bei Impulsen oder anderen Geräuschen kurzer Dauer) in Frequenzbändern oder mit
A-Bewertung wird aus den Ergebnissen dieser Messungen berechnet.
ANMERKUNG Unterschiedliche Messflächenformen können zu unterschiedlichen Werten des Schallleistungspegels der
betrachteten Geräuschquelle führen. Daher sind in einer

Acoustique - Détermination des niveaux de puissance et d'énergie acoustiques émis par les sources de bruit à partir de la pression acoustique - Méthodes d'expertise pour des conditions approchant celles du champ libre sur plan réfléchissant (ISO 3744:2010)

L'ISO 3744:2010 spécifie des méthodes de détermination du niveau de puissance acoustique ou du niveau d'énergie acoustique émis par une source de bruit à partir des niveaux de pression acoustique mesurés sur une surface entourant la source de bruit (machine ou équipement), dans des conditions approchant celles du champ acoustique libre au voisinage d'un ou de plusieurs plans réfléchissants. Le niveau de puissance acoustique (ou, dans le cas d'impulsions sonores ou d'émissions sonores transitoires, le niveau d'énergie acoustique) produit par la source de bruit, par bandes de fréquences ou avec la pondération A appliquée, est calculé en utilisant ces mesures.
Les méthodes spécifiées dans l'ISO 3744:2010 sont applicables à tous les types de bruit (stable, non stable, fluctuant, impulsions acoustiques isolées, etc.) définis dans l'ISO 12001.
L'ISO 3744:2010 s'applique à tous les types de sources de bruit, quelles que soient leurs dimensions (par exemple installation, dispositif, machine, composant, sous-ensemble fixe ou se déplaçant lentement), sous réserve de pouvoir satisfaire les conditions de mesurage.
Les environnements d'essai qui sont applicables aux mesurages réalisés conformément à l'ISO 3744:2010 peuvent être en salle ou en plein air, comprendre un ou plusieurs plans acoustiques réfléchissants sur lesquels ou à proximité desquels est montée la source de bruit en essai. L'environnement idéal est un espace complètement libre, dépourvu de surfaces limites ou réfléchissantes autres que le ou les plans réfléchissants (tels que ceux d'une salle semi-anéchoïque qualifiée), mais des méthodes sont fournies pour appliquer des corrections (dans des limites spécifiées) lorsque ces environnements ne correspondent pas à ces conditions idéales.
Des informations sont données sur l'incertitude associée aux niveaux de puissance acoustique et aux niveaux d'énergie acoustique déterminés conformément à l'ISO 3744:2010 pour des mesurages effectués dans des bandes de fréquences limitées et avec la pondération fréquentielle A. L'incertitude est conforme à celle de la classe de précision 2 (classe expertise) définie dans l'ISO 12001:1996.

Akustika - Ugotavljanje ravni zvočnih moči virov hrupa z merjenjem zvočnega tlaka - Inženirska metoda v pretežno prostem polju nad odbojno ravnino (ISO 3744:2010)

Ta mednarodni standard določa metode ugotavljanja ravni moči zvoka ali ravni energije zvoka iz virov hrupa iz ravni zvočnega tlaka, merjenih na površju, ki obdaja vir hrupa (stroji ali oprema), v okolju, ki se približuje akustičnemu prostemu polju v bližini ene ali več odbojnih ravnin. Raven moči zvoka (ali v primeru prodorov hrupa ali prehodnih emisij hrupa raven zvočne energije), ki jo proizvede vir hrupa v frekvenčnih pasovih ali z uporabljenim A-uteženjem, je izračunana z uporabo teh merjenj.

General Information

Status
Published
Publication Date
30-Sep-2010
Withdrawal Date
29-Apr-2011
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Oct-2010
Completion Date
01-Oct-2010

Relations

Buy Standard

Standard
EN ISO 3744:2010
English language
87 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 3744:2006
English language
79 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3744:2010
01-december-2010
1DGRPHãþD
SIST EN ISO 3744:2009
$NXVWLND8JRWDYOMDQMHUDYQL]YRþQLKPRþLYLURYKUXSD]PHUMHQMHP]YRþQHJD
WODND,QåHQLUVNDPHWRGDYSUHWHåQRSURVWHPSROMXQDGRGERMQRUDYQLQR ,62

Acoustics - Determination of sound power levels and sound energy levels of noise
sources using sound pressure - Engineering methods for an essentially free field over a
reflecting plane (ISO 3744:2010)
Akustik - Bestimmung der Schallleistungs- und der Schallenergiepegel von
Geräuschquellen aus Schalldruckmessungen - Hüllflächenverfahren der
Genauigkeitsklasse 2 für ein im Wesentlichen freies Schallfeld über einer reflektierenden
Ebene (ISO 3744:2010)
Acoustique - Détermination des niveaux de puissance et d'énergie acoustique émis par
les sources de bruit à partir de la pression acoustique - Méthodes d'expertise pour des
conditions approchant celles du champ libre sur plan réfléchissant (ISO 3744:2010)
Ta slovenski standard je istoveten z: EN ISO 3744:2010
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
SIST EN ISO 3744:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3744:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 3744:2010


EUROPEAN STANDARD
EN ISO 3744

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2010
ICS 17.140.01 Supersedes EN ISO 3744:2009
English Version
Acoustics - Determination of sound power levels and sound
energy levels of noise sources using sound pressure -
Engineering methods for an essentially free field over a
reflecting plane (ISO 3744:2010)
Acoustique - Détermination des niveaux de puissance et Akustik - Bestimmung der Schallleistungs- und der
d'énergie acoustiques émis par les sources de bruit à partir Schallenergiepegel von Geräuschquellen aus
de la pression acoustique - Méthodes d'expertise pour des Schalldruckmessungen - Hüllflächenverfahren der
conditions approchant celles du champ libre sur plan Genauigkeitsklasse 2 für ein im Wesentlichen freies
réfléchissant (ISO 3744:2010) Schallfeld über einer reflektierenden Ebene (ISO
3744:2010)
This European Standard was approved by CEN on 14 August 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3744:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3744:2010
EN ISO 3744:2010 (E)
Contents Page
Foreword .3
Annex ZA .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 3744:2010
EN ISO 3744:2010 (E)
Foreword
The text of ISO 3744:2010 has been prepared by Technical Committee ISO/TC 43 “Acoustics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 3744:2010 by
Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2011, and conflicting national standards shall be withdrawn at the
latest by April 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for i
...

SLOVENSKI STANDARD
oSIST prEN ISO 3744:2006
01-junij-2006
$NXVWLND8JRWDYOMDQMHUDYQL]YRþQLKPRþLYLURYKUXSD]PHUMHQMHP]YRþQHJD
WODND,QåHQLUVNDPHWRGDYSUHWHåQRSURVWHPSROMXQDGRGERMQRUDYQLQR ,62',6

Acoustics - Determination of sound power levels and sound energy levels of noise
sources using sound pressure - Engineering method in an essentially free field over a
reflecting plane (ISO/DIS 3744:2006)
Akustik - Bestimmung der Schallleistungs- und der Schallenergiepegel von
Geräuschquellen aus Schalldruckmessungen - Hüllflächenverfahren der
Genauigkeitsklasse 2 für ein im Wesentlichen freies Schallfeld über einer reflektierenden
Ebene (ISO/DIS 3744:2006)
Acoustique - Détermination des niveaux de puissance acoustique et des niveaux
d'énergie acoustique émis par les sources de bruit a partir de la pression acoustique -
Méthode d'expertise pour des conditions approchant celles du champ libre sur plan
réfléchissant (ISO/DIS 3744:2006)
Ta slovenski standard je istoveten z: prEN ISO 3744
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
oSIST prEN ISO 3744:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 3744
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS Will supersede EN ISO 3744:1995
English Version
Acoustics - Determination of sound power levels of noise
sources using sound pressure - Engineering method in an
essentially free field over a reflecting plane (ISO/DIS 3744:2006)
Acoustique - Détermination des niveaux de puissance
acoustique et des niveaux d'énergie acoustique émis par
les sources de bruit à partir de la pression acoustique -
Méthode d'expertise pour des conditions approchant celles
du champ libre sur plan réfléchissant (ISO/DIS 3744:2006)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 211.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 3744:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
prEN ISO 3744:2006 (E)




Foreword

This document (prEN ISO 3744:2006) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 "Acoustics", the
secretariat of which is held by DS.

This document is currently submitted to the parallel Enquiry.

This document will supersede EN ISO 3744:1995.

This document has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).


Endorsement notice

The text of ISO 3744:2006 has been approved by CEN as prEN ISO 3744:2006 without any
modifications.

2

---------------------- Page: 3 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 3744
ISO/TC 43/SC 1 Secretariat: DS
Voting begins on: Voting terminates on:
2006-03-30 2006-08-30
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Acoustics — Determination of sound power levels and sound
energy levels of noise sources using sound pressure —
Engineering method for an essentially free field over a reflecting
plane
Acoustique — Détermination des niveaux de puissance acoustique et des niveaux d'énergie acoustique émis
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.