EN ISO 5199:2002
(Main)Technical specifications for centrifugal pumps - Class II (ISO 5199:2002)
Technical specifications for centrifugal pumps - Class II (ISO 5199:2002)
++TC forecast updated following TC Resolution 5/2000 (sj 2000-12-11)++
Technische Anforderungen an Kreiselpumpen - Klasse II (ISO 5199:2002)
1.1 Diese Internationale Norm gilt für die Anforderungen der Klasse II an einstufige oder mehrstufige Kreiselpumpen in horizontaler oder vertikaler Bauart mit beliebigem Antrieb, die in beliebiger Weise eingebaut und für allgemeine Anwendungen vorgesehen werden. Anwendungen in der Chemieindustrie sind typisch für die in der vorliegenden Internationalen Norm erfassten Pumpen (z. B. für Pumpen nach ISO 2858).
1.2 Die vorliegende Internationale Norm beinhaltet Merkmale der konstruktiven Ausführung dieser Pumpen hinsichtlich ihrer Installation, Wartung und Betriebssicherheit unter Einbeziehung der Grundplatte, der Kupplungen und der Hilfsrohrleitungen der Pumpe; Anforderungen an den Antrieb werden jedoch, außer an dessen Nennausgangsleistung, nicht festgelegt.
1.3 Wenn diese Internationale Norm anzuwenden ist und ein bestimmtes konstruktives Merkmal gefordert wird, dürfen alternative Ausführungen angeboten werden, sofern sie den Festlegungen dieser Internationalen Norm entsprechen und ausführlich beschrieben werden.
Unter der Voraussetzung, dass die Abweichungen genannt werden, dürfen auch Pumpen angeboten werden, die nicht mit allen Anforderungen dieser Internationalen Norm übereinstimmen.
Spécifications techniques pour pompes centrifuges - Classe II (ISO 5199:2002)
La présente Norme internationale spécifie les exigences relatives aux pompes centrifuges de classe II à un étage ou multi-étagées, de construction horizontale ou verticale, quelles que soient la machine d'entraînement et l'installation pour une application générale. Les pompes utilisées dans l'industrie chimique (par exemple celles conformes à l'ISO 2858) sont des exemples types de celles couvertes par la présente Norme internationale. La présente Norme internationale comprend les caractéristiques de conception relatives à l'installation, l'entretien et la sécurité de ces pompes, y compris le socle, l'accouplement et les tuyauteries auxiliaires, mais elle ne spécifie aucune exigence relative à la machine d'entraînement autre que celles relatives à sa puissance nominale. Lorsque l'application de la présente Norme internationale est demandée et requiert une caractéristique de conception particulière, des conceptions différentes répondant à l'esprit de la présente Norme internationale peuvent être proposées, à condition de décrire la variante en détail. Des pompes non conformes à toutes les exigences de la présente Norme internationale peuvent être proposées, à condition d'indiquer tous les écarts.
Tehnične specifikacije za centrifugalne črpalke – Razred II (ISO 5199:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5199:2004
01-september-2004
7HKQLþQHVSHFLILNDFLMH]DFHQWULIXJDOQHþUSDONH±5D]UHG,, ,62
Technical specifications for centrifugal pumps - Class II (ISO 5199:2002)
Technische Anforderungen an Kreiselpumpen - Klasse II (ISO 5199:2002)
Spécifications techniques pour pompes centrifuges - Classe II (ISO 5199:2002)
Ta slovenski standard je istoveten z: EN ISO 5199:2002
ICS:
23.080 ýUSDONH Pumps
SIST EN ISO 5199:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5199:2004
---------------------- Page: 2 ----------------------
SIST EN ISO 5199:2004
EUROPEAN STANDARD
EN ISO 5199
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2002
ICS 22.080 Supersedes EN 25199:1992
English version
Technical specifications for centrifugal pumps - Class II (ISO
5199:2002)
Spécifications techniques pour pompes centrifuges - Technische Anforderungen an Kreiselpumpen - Klasse II
Classe II (ISO 5199:2002) (ISO 5199:2002)
This European Standard was approved by CEN on 11 March 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5199:2002 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5199:2004
EN ISO 5199:2002 (E)
CORRECTED 2003-09-24
Foreword
This document (ISO 5199:2002) has been prepared by Technical Committee ISO/TC 115
"Pumps" in collaboration with Technical Committee CEN/TC 197 "Pumps", the secretariat of
which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by September 2002, and conflicting
national standards shall be withdrawn at the latest by September 2002.
This document supersedes EN 25199:1992.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of ISO 5199:2002 has been approved by CEN as EN ISO 5199:2002 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5199:2004
EN ISO 5199:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 2858 1975 End-suction centrifugal pumps EN 22858 1993
(rating 16 bar) - Designation,
nominal duty point and
dimensions
ISO 3274 1996 Geometrical product EN ISO 3274 1997
specifications (GPS) - Surface
texture: Profile method - Nominal
characteristics of contact (stylus)
instruments
ISO 3661 1977 End-suction centrifugal pumps - EN 23661 1993
Baseplate and installation
dimensions
ISO 3744 1994 Acoustics - Determination of EN ISO 3744 1995
sound power levels of noise
sources using sound pressure -
Engineering method in an
essentially free field over a
reflecting plane
ISO 3
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.