Windows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets

This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, which are applicable to internal pedestrian doorsets.
Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are covered by EN 16034.
This European Standard applies to doorsets intended to be used internally for construction works as:
-   intended use a) in escape routes;
-   intended use b) for specific uses with specific requirements;
-   intended use c) for communication only.
NOTE 1   These above intended uses can be combined, for example escape routes with specific requirements.
For internal pedestrian doorsets with resistance to fire and /or smoke control characteristics, this standard should only apply in conjunction with EN 16034.
Products covered by this European Standard are power operated hinged or manually operated internal pedestrian doorsets and screens with flush or panelled leaves, single or double leaf, which could be completed with:
-   related building hardware;
-   door closing devices;
-   integral fanlights;
-   adjacent parts that are contained within a single frame for inclusion in a single aperture.
NOTE 2   Manually operated doors with door closing devices are not considered to be power operated doors.
Products covered by this European Standard are not assessed for structural applications.
This European Standard does not apply to:
-   industrial, commercial and garage doors and gates according to EN 13241;
-   external pedestrian doorsets according to EN 14351-1;
-   door leaves placed on the market as a single unit;
-   door frames placed on the market as a single unit;
-   power operated pedestrian doorsets, other than swing type, according to EN 16361.
Doorsets can be placed on the market with their component (leaf and frame) separate when each of these components are clearly identified.
This European Standard does not deal with any specific requirements on noise emitted from internal power operated hinged doorsets as their noise emission is not considered to be a relevant hazard.

Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 2: Innentüren

Die vorliegende Europäische Norm identifiziert werkstoffunabhängige Leistungsmerkmale, außer Feuerbeständigkeits- und Rauchdichtheitseigenschaften, die für Innentüren gelten.
Feuerbeständigkeits- und/oder Rauchdichtheitseigenschaften für Türen und Fenster werden von EN 16034 abgedeckt.
Diese Europäische Norm gilt für Innentüren in Bauwerken, die für folgende Zwecke verwendet werden:
-   Verwendungszweck a) in Fluchtwegen;
-   Verwendungszweck b) für besondere Verwendungszwecke mit besonderen Anforderungen;
-   Verwendungdzweck c) lediglich als Verbindung.
ANMERKUNG 1   Die oben genannten Anwendungsgebiete können kombiniert werden, z. B. Fluchtwege mit besonderen Anforderungen.
Für Innentüren mit Feuerbeständigkeits- und/oder Rauchdichtheitseigenschaften sollte diese Norm nur in Verbindung mit EN 16034 angewendet werden.
Produkte, die durch diese Europäische Norm abgedeckt werden, sind kraftbetätigte Drehflügeltüren oder handbetätigte Innentüren und Vorsatztüren mit Sperr- oder Füllungstürblättern, ein- oder zweiflügelig, die ergänzt werden könnten mit:
-   zugehörigen Baubeschlägen;
-   Türschließmitteln;
-   integrierten Oberlichtern;
-   angrenzenden Seiten- und Oberteilen, in einem einzigen (gemeinsamen) Rahmen zum Einbau in eine gemeinsame Öffnung.
ANMERKUNG 2   Handbetätigte Türen mit Türschließmitteln werden nicht als kraftbetätigten Türen angesehen
Die in dieser Europäischen Norm beschriebenen Produkte weren nicht für eine Anwendung als tragende Bauteile bewertet.
Diese Europäische Norm gilt nicht für:
-   Tore nach EN 13241;
-   Außentüren nach EN 14351-1;
-   im Handel einzeln erhältliche Türflügel;
-   im Handel einzeln erhältliche Türrahmen;
-   kraftbetätigte Türen nach EN 16361, die keine Drehflügeltüren sind.
Türen können einzeln mit ihren Komponenten (Flügel und Rahmen) auf dem Markt angeboten werden, wenn jede dieser Komponenten eindeutig identifiziert wurde.
Die vorliegende Europäische Norm beschäftigt sich nicht mit spezifischen Anforderungen bezüglich Lärm von kraftbetätigten Drehflügelinnentüren, da Lärmemissionen nicht als relevante Gefährdung angesehen werden.

Portes et fenêtres - Norme produit, caractéristiques de performances - Partie 2: Blocs-portes intérieurs pour piétons

La présente Norme européenne identifie des caractéristiques de performance indépendantes des matériaux, à l'exception des caractéristiques de résistance au feu et de contrôle de la fumée, qui s'appliquent aux blocs-portes intérieurs pour piétons.
Les caractéristiques de résistance au feu et / ou de contrôle de la fumée pour les portes de garage et les fenêtres ouvrantes sont couvertes par la norme EN 16034.
Cette norme européenne s'applique aux blocs-portes destinés à être utilisés à l'intérieur des ouvrages de construction :
- usage prévu a) pour les issues de secours non soumis à des réglementations concernant la résistance au feu et/ou le dégagement de fumée ;
- usage prévu b) pour des usages spécifiques associés à des exigences particulières ;
- usage prévu c) pour la communication uniquement.
NOTE 1 Les usages prévus indiqués ci-dessus peuvent être combinés, par exemple issues de secours associées à des exigences particulières.
Pour les blocs-portes intérieurs pour piétons avec résistance au feu et/ou aux caractéristiques de contrôle de fumée, cette norme ne doit s'appliquer qu'avec EN 16034.
Les produits couverts par la présente Norme européenne sont des blocs-portes battants intérieurs manuels ou motorisés pour piétons et ensembles composés avec vantaux plans ou menuisés, à un ou deux vantaux, pouvant être complétés :
- de la quincaillerie associée ;
- de dispositifs de fermeture de porte ;
- d'impostes ;
- de parties adjacentes qui sont intégrées dans un châssis individuel afin d'être installées dans une seule ouverture.
NOTE 2 Les portes manuelles avec dispositifs de fermeture de porte ne sont pas des portes motorisées.
Les produits couverts par la présente Norme européenne ne sont pas destinés à des applications structurelles.
La présente Norme européenne ne s’applique pas aux :
- portes industrielles, commerciales et de garages qui relèvent de l’EN 13241 ;
- blocs-portes extérieurs pour piétons qui relèvent de l'EN 14351-1 ;
- vantaux de portes commercialisés à l’unité ;
- dormants commercialisés à l’unité ;
- blocs-portes motorisés pour piétons, autre que le type battant, qui relèvent de l'EN 16361.
Des ensembles de portes peuvent être mis sur le marché avec leur composant (ouvrant et dormant) séparés lorsque chacun de ces composants sont clairement identifiés.
La présente Norme européenne ne traite pas d'exigences particulières concernant le bruit émis par les portes battantes intérieures motorisées car l'émission sonore n'est pas considérée comme un danger pertinent.

Okna in vrata - Standard za proizvod, zahtevane lastnosti - 2. del: Notranja vrata

Ta evropski standard določa zahtevane lastnosti, ki niso odvisne od materialov in se uporabljajo za notranja vrata brez odpornosti proti požaru in/ali uhajanju dima.
Ta dokument se uporablja za vrata, ki so namenjena notranji uporabi pri gradbenih objektih:
– pri evakuacijskih poteh, ki niso podvržene požaru in/ali uhajanju dima;
– za posebne uporabe z posebnimi zahtevami;
– samo za komunikacijo.
OPOMBA: Te zgoraj predvidene uporabe je mogoče kombinirati, na primer evakuacijske poti s posebnimi zahtevami.
Izdelki, ki so zajeti v tem evropskem standardu, so električno ali ročno upravljana notranja vrata in rešetke z enoslojnimi ali dvoslojnimi gladkimi ali panelnimi krili, ki jih je mogoče dokončati s/z:
– ustreznim stavbnim okovjem;
– napravami za zapiranje vrat.
OPOMBA: Ročno upravljana vrata z napravami za zapiranje vrat niso električno upravljana vrata.
– pahljačastimi okenci nad vrati;
– soležnimi deli, ki so sestavni del enega okvirja za vključitev v eno odprtino.
Izdelki, ki so zajeti v tem evropskem standardu, niso ocenjeni za konstrukcijsko uporabo.
Ta evropski standard se ne uporablja za:
– vrata za industrijske in javne prostore ter garažna vrata v skladu s standardom EN 13241-1;
– zunanje sestave vrat za prehod ljudi v skladu s standardom EN 14351-1;
– vratna krila, ki so dana na trg ločeno;
– vratni okvirji, ki so dani na trg ločeno;
– električno upravljana zunanja vrata v skladu s standardom EN 16361.
Emisije hrupa električno upravljanih notranjih krilnih vrat se ne obravnavajo kot ustrezno tveganje; zaradi tega ta standard ne vsebuje nobenih posebnih zahtev glede hrupa.

General Information

Status
Published
Publication Date
06-Nov-2018
Withdrawal Date
30-Aug-2021
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jan-2024
Completion Date
15-Jan-2024

Buy Standard

Standard
EN 14351-2:2019
English language
53 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 14351-2:2014
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Okna in vrata - Standard za proizvod, zahtevane lastnosti - 2. del: Notranja vrataFenster und Türen - Produktnorm, Leistungseigenschaften - Teil 2: InnentürenPortes et fenêtres - Norme produit, caractéristiques de performances - Partie 2: Blocs-portes intérieurs pour piétonsWindows and doors - Product standard, performance characteristics - Part 2: Internal pedestrian doorsets91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 14351-2:2018SIST EN 14351-2:2019en,fr,de01-januar-2019SIST EN 14351-2:2019SLOVENSKI
STANDARD



SIST EN 14351-2:2019



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14351-2
November
t r s z ICS
{ sä r x rä w r English Version
Windows and doors æ Product standardá performance characteristics æ Part
tã Internal pedestrian doorsets Portes et fenêtres æ Norme produitá caractéristiques de performances æ Partie
tã Blocsæportes intérieurs pour piétons
Fenster und Türen æ Produktnormá Leistungseigenschaften æ Teil
tã Innentüren This European Standard was approved by CEN on
u April
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v u w sæ tã t r s z ESIST EN 14351-2:2019



EN 14351-2:2018 (E) 2 Contents Page European foreword . 5 1 Scope . 7 2 Normative references . 8 3 Terms, definitions and symbols .10 3.1 Terms and definitions .10 3.2 Symbols .11 4 Product characteristics .12 4.1 General .12 4.2 Release of dangerous substances (only for emissions into indoor air impact) (for intended use a, b and c) .12 4.3 Impact resistance (where relevant, only for glazed doors with injury risks) (for intended use a, b and c) .12 4.3.1 Glazed doors.12 4.3.2 Unframed glass doorsets .12 4.4 Height (for intended use a, b and c) .12 4.5 Reaction to fire .12 4.5.1 Reaction to fire of components (for intended use a, b and c).12 4.5.2 Reaction to fire of the doorset .13 4.6 Direct airbo
...

SLOVENSKI STANDARD
oSIST prEN 14351-2:2014
01-julij-2014
2NQDLQYUDWD6WDQGDUG]DSURL]YRG]DKWHYDQHODVWQRVWLGHO1RWUDQMDYUDWD
EUH]GRORþHQLKODVWQRVWLSRåDUQHRGSRUQRVWLLQDOLGLPQRWHVQRVWL
Windows and doors - Product standard, performance characteristics - Part 2: Internal
pedestrian doorsets without resistance to fire and /or smoke leakage characteristics
Fenster und Türen - Produktnorm, Leistungseigenschaften - Teil 2: Innentüren ohne
Feuerschutz- und/oder Rauchdichtheitseigenschaften
Portes et fenêtres - Norme produit, caractéristiques de performances - Partie 2: Blocs-
portes intérieurs pour piétons sans caractéristiques de résistance au feu et/ou
dégagement de fumée
Ta slovenski standard je istoveten z: prEN 14351-2
ICS:
91.060.50 Vrata in okna Doors and windows
oSIST prEN 14351-2:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14351-2:2014

---------------------- Page: 2 ----------------------
oSIST prEN 14351-2:2014

EUROPEAN STANDARD
DRAFT
prEN 14351-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2014
ICS 91.060.50
English Version
Windows and doors - Product standard, performance
characteristics - Part 2: Internal pedestrian doorsets without
resistance to fire and /or smoke leakage characteristics
Portes et fenêtres - Norme produit, caractéristiques de Fenster und Türen - Produktnorm, Leistungseigenschaften -
performances - Partie 2: Blocs-portes intérieurs pour Teil 2: Innentüren ohne Feuerschutz- und/oder
piétons sans caractéristiques de résistance au feu et/ou Rauchdichtheitseigenschaften
dégagement de fumée
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14351-2:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14351-2:2014
prEN 14351-2:2014 (E)
Contents Page
Foreword .5
1 Scope .6
2 Normative references .6
3 Terms and definitions .9
4 Requirements . 10
4.1 General . 10
4.2 Release of dangerous substances (only for emissions into indoor air) . 10
4.3 Impact resistance. 10
4.3.1 For glazed doors with injury risk .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.